usr/src/uts/common/inet/ip.h

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */
/* Copyright (c) 1990 Mentat Inc. */

#ifndef	_INET_IP_H
#define	_INET_IP_H

#pragma ident	"%Z%%M%	%I%	%E% SMI"

#ifdef	__cplusplus
extern "C" {
#endif

#include <sys/isa_defs.h>
#include <sys/types.h>
#include <inet/mib2.h>
#include <inet/nd.h>
#include <sys/atomic.h>
#include <net/if_dl.h>
#include <net/if.h>
#include <netinet/ip.h>
#include <netinet/igmp.h>
#include <sys/neti.h>
#include <sys/hook.h>
#include <sys/hook_event.h>
#include <sys/hook_impl.h>
#include <inet/ip_stack.h>

#ifdef _KERNEL
#include <netinet/ip6.h>
#include <sys/avl.h>
#include <sys/vmem.h>
#include <sys/squeue.h>
#include <net/route.h>
#include <sys/systm.h>
#include <sys/multidata.h>
#include <net/radix.h>

#ifdef DEBUG
#define	ILL_DEBUG
#define	IRE_DEBUG
#define	NCE_DEBUG
#define	CONN_DEBUG
#endif

#define	IP_DEBUG
/*
 * The mt-streams(9F) flags for the IP module; put here so that other
 * "drivers" that are actually IP (e.g., ICMP, UDP) can use the same set
 * of flags.
 */
#define	IP_DEVMTFLAGS D_MP
#endif	/* _KERNEL */

#define	IP_MOD_NAME	"ip"
#define	IP_DEV_NAME	"/dev/ip"
#define	IP6_DEV_NAME	"/dev/ip6"

#define	UDP_MOD_NAME	"udp"
#define	UDP_DEV_NAME	"/dev/udp"
#define	UDP6_DEV_NAME	"/dev/udp6"

#define	TCP_MOD_NAME	"tcp"
#define	TCP_DEV_NAME	"/dev/tcp"
#define	TCP6_DEV_NAME	"/dev/tcp6"

#define	SCTP_MOD_NAME	"sctp"

/* Minor numbers */
#define	IPV4_MINOR	0
#define	IPV6_MINOR	1
#define	TCP_MINOR	2
#define	TCP_MINOR6	3

#ifndef	_IPADDR_T
#define	_IPADDR_T
typedef uint32_t ipaddr_t;
#endif

/* Number of bits in an address */
#define	IP_ABITS		32
#define	IPV6_ABITS		128

#define	IP_HOST_MASK		(ipaddr_t)0xffffffffU

#define	IP_CSUM(mp, off, sum)		(~ip_cksum(mp, off, sum) & 0xFFFF)
#define	IP_CSUM_PARTIAL(mp, off, sum)	ip_cksum(mp, off, sum)
#define	IP_BCSUM_PARTIAL(bp, len, sum)	bcksum(bp, len, sum)
#define	IP_MD_CSUM(pd, off, sum)	(~ip_md_cksum(pd, off, sum) & 0xffff)
#define	IP_MD_CSUM_PARTIAL(pd, off, sum) ip_md_cksum(pd, off, sum)

/*
 * Flag to IP write side to indicate that the appln has sent in a pre-built
 * IP header. Stored in ipha_ident (which is otherwise zero).
 */
#define	IP_HDR_INCLUDED			0xFFFF

#define	ILL_FRAG_HASH_TBL_COUNT	((unsigned int)64)
#define	ILL_FRAG_HASH_TBL_SIZE	(ILL_FRAG_HASH_TBL_COUNT * sizeof (ipfb_t))

#define	IPV4_ADDR_LEN			4
#define	IP_ADDR_LEN			IPV4_ADDR_LEN
#define	IP_ARP_PROTO_TYPE		0x0800

#define	IPV4_VERSION			4
#define	IP_VERSION			IPV4_VERSION
#define	IP_SIMPLE_HDR_LENGTH_IN_WORDS	5
#define	IP_SIMPLE_HDR_LENGTH		20
#define	IP_MAX_HDR_LENGTH		60

#define	IP_MAX_OPT_LENGTH (IP_MAX_HDR_LENGTH-IP_SIMPLE_HDR_LENGTH)

#define	IP_MIN_MTU			(IP_MAX_HDR_LENGTH + 8)	/* 68 bytes */

/*
 * XXX IP_MAXPACKET is defined in <netinet/ip.h> as well. At some point the
 * 2 files should be cleaned up to remove all redundant definitions.
 */
#define	IP_MAXPACKET			65535
#define	IP_SIMPLE_HDR_VERSION \
	((IP_VERSION << 4) | IP_SIMPLE_HDR_LENGTH_IN_WORDS)

#define	UDPH_SIZE			8

/* Leave room for ip_newroute to tack on the src and target addresses */
#define	OK_RESOLVER_MP(mp)						\
	((mp) && ((mp)->b_wptr - (mp)->b_rptr) >= (2 * IP_ADDR_LEN))

/*
 * Constants and type definitions to support IP IOCTL commands
 */
#define	IP_IOCTL			(('i'<<8)|'p')
#define	IP_IOC_IRE_DELETE		4
#define	IP_IOC_IRE_DELETE_NO_REPLY	5
#define	IP_IOC_IRE_ADVISE_NO_REPLY	6
#define	IP_IOC_RTS_REQUEST		7

/* Common definitions used by IP IOCTL data structures */
typedef struct ipllcmd_s {
	uint_t	ipllc_cmd;
	uint_t	ipllc_name_offset;
	uint_t	ipllc_name_length;
} ipllc_t;

/* IP IRE Change Command Structure. */
typedef struct ipic_s {
	ipllc_t	ipic_ipllc;
	uint_t	ipic_ire_type;
	uint_t	ipic_max_frag;
	uint_t	ipic_addr_offset;
	uint_t	ipic_addr_length;
	uint_t	ipic_mask_offset;
	uint_t	ipic_mask_length;
	uint_t	ipic_src_addr_offset;
	uint_t	ipic_src_addr_length;
	uint_t	ipic_ll_hdr_offset;
	uint_t	ipic_ll_hdr_length;
	uint_t	ipic_gateway_addr_offset;
	uint_t	ipic_gateway_addr_length;
	clock_t	ipic_rtt;
	uint32_t ipic_ssthresh;
	clock_t	ipic_rtt_sd;
	uchar_t ipic_ire_marks;
} ipic_t;

#define	ipic_cmd		ipic_ipllc.ipllc_cmd
#define	ipic_ll_name_length	ipic_ipllc.ipllc_name_length
#define	ipic_ll_name_offset	ipic_ipllc.ipllc_name_offset

/* IP IRE Delete Command Structure. */
typedef struct ipid_s {
	ipllc_t	ipid_ipllc;
	uint_t	ipid_ire_type;
	uint_t	ipid_addr_offset;
	uint_t	ipid_addr_length;
	uint_t	ipid_mask_offset;
	uint_t	ipid_mask_length;
} ipid_t;

#define	ipid_cmd		ipid_ipllc.ipllc_cmd

#ifdef _KERNEL
/*
 * Temporary state for ip options parser.
 */
typedef struct ipoptp_s
{
	uint8_t		*ipoptp_next;	/* next option to look at */
	uint8_t		*ipoptp_end;	/* end of options */
	uint8_t		*ipoptp_cur;	/* start of current option */
	uint8_t		ipoptp_len;	/* length of current option */
	uint32_t	ipoptp_flags;
} ipoptp_t;

/*
 * Flag(s) for ipoptp_flags
 */
#define	IPOPTP_ERROR	0x00000001
#endif	/* _KERNEL */


/* Controls forwarding of IP packets, set via ndd */
#define	IP_FORWARD_NEVER	0
#define	IP_FORWARD_ALWAYS	1

#define	WE_ARE_FORWARDING(ipst)	((ipst)->ips_ip_g_forward == IP_FORWARD_ALWAYS)

#define	IPH_HDR_LENGTH(ipha)						\
	((int)(((ipha_t *)ipha)->ipha_version_and_hdr_length & 0xF) << 2)

#define	IPH_HDR_VERSION(ipha)						\
	((int)(((ipha_t *)ipha)->ipha_version_and_hdr_length) >> 4)

#ifdef _KERNEL
/*
 * IP reassembly macros.  We hide starting and ending offsets in b_next and
 * b_prev of messages on the reassembly queue.	The messages are chained using
 * b_cont.  These macros are used in ip_reassemble() so we don't have to see
 * the ugly casts and assignments.
 * Note that the offsets are <= 64k i.e. a uint_t is sufficient to represent
 * them.
 */
#define	IP_REASS_START(mp)		((uint_t)(uintptr_t)((mp)->b_next))
#define	IP_REASS_SET_START(mp, u)	\
	((mp)->b_next = (mblk_t *)(uintptr_t)(u))
#define	IP_REASS_END(mp)		((uint_t)(uintptr_t)((mp)->b_prev))
#define	IP_REASS_SET_END(mp, u)		\
	((mp)->b_prev = (mblk_t *)(uintptr_t)(u))

#define	IP_REASS_COMPLETE	0x1
#define	IP_REASS_PARTIAL	0x2
#define	IP_REASS_FAILED		0x4

/*
 * Test to determine whether this is a module instance of IP or a
 * driver instance of IP.
 */
#define	CONN_Q(q)	(WR(q)->q_next == NULL)

#define	Q_TO_CONN(q)	((conn_t *)(q)->q_ptr)
#define	Q_TO_TCP(q)	(Q_TO_CONN((q))->conn_tcp)
#define	Q_TO_UDP(q)	(Q_TO_CONN((q))->conn_udp)

/*
 * The following two macros are used by IP to get the appropriate
 * wq and rq for a conn. If it is a TCP conn, then we need
 * tcp_wq/tcp_rq else, conn_wq/conn_rq. IP can use conn_wq and conn_rq
 * from a conn directly if it knows that the conn is not TCP.
 */
#define	CONNP_TO_WQ(connp)	\
	(IPCL_IS_TCP(connp) ? (connp)->conn_tcp->tcp_wq : (connp)->conn_wq)

#define	CONNP_TO_RQ(connp)	RD(CONNP_TO_WQ(connp))

#define	GRAB_CONN_LOCK(q)	{				\
	if (q != NULL && CONN_Q(q))				\
		mutex_enter(&(Q_TO_CONN(q))->conn_lock);	\
}

#define	RELEASE_CONN_LOCK(q)	{				\
	if (q != NULL && CONN_Q(q))				\
		mutex_exit(&(Q_TO_CONN(q))->conn_lock);		\
}

/* "Congestion controlled" protocol */
#define	IP_FLOW_CONTROLLED_ULP(p)   ((p) == IPPROTO_TCP || (p) == IPPROTO_SCTP)

/*
 * Complete the pending operation. Usually an ioctl. Can also
 * be a bind or option management request that got enqueued
 * in an ipsq_t. Called on completion of the operation.
 */
#define	CONN_OPER_PENDING_DONE(connp)	{			\
	mutex_enter(&(connp)->conn_lock);			\
	(connp)->conn_oper_pending_ill = NULL;			\
	cv_broadcast(&(connp)->conn_refcv);			\
	mutex_exit(&(connp)->conn_lock);			\
	CONN_DEC_REF(connp);					\
}

/* Get the credential of an IP queue of unknown type */
#define	GET_QUEUE_CRED(wq)						\
	((wq)->q_next ? (((ill_t *)(wq)->q_ptr)->ill_credp) \
	    : ((Q_TO_CONN((wq)))->conn_cred))

/*
 * Flags for the various ip_fanout_* routines.
 */
#define	IP_FF_SEND_ICMP		0x01	/* Send an ICMP error */
#define	IP_FF_HDR_COMPLETE	0x02	/* Call ip_hdr_complete if error */
#define	IP_FF_CKSUM		0x04	/* Recompute ipha_cksum if error */
#define	IP_FF_RAWIP		0x08	/* Use rawip mib variable */
#define	IP_FF_SRC_QUENCH	0x10	/* OK to send ICMP_SOURCE_QUENCH */
#define	IP_FF_SYN_ADDIRE	0x20	/* Add IRE if TCP syn packet */
#define	IP_FF_IPINFO		0x80	/* Used for both V4 and V6 */
#define	IP_FF_SEND_SLLA		0x100	/* Send source link layer info ? */
#define	IPV6_REACHABILITY_CONFIRMATION	0x200	/* Flags for ip_xmit_v6 */
#define	IP_FF_NO_MCAST_LOOP	0x400	/* No multicasts for sending zone */

/*
 * Following flags are used by IPQoS to determine if policy processing is
 * required.
 */
#define	IP6_NO_IPPOLICY		0x800	/* Don't do IPQoS processing */
#define	IP6_IN_LLMCAST		0x1000	/* Multicast */

#define	IP_FF_LOOPBACK		0x2000	/* Loopback fanout */

#ifndef	IRE_DB_TYPE
#define	IRE_DB_TYPE	M_SIG
#endif

#ifndef	IRE_DB_REQ_TYPE
#define	IRE_DB_REQ_TYPE	M_PCSIG
#endif

#ifndef	IRE_ARPRESOLVE_TYPE
#define	IRE_ARPRESOLVE_TYPE	M_EVENT
#endif

/*
 * Values for squeue switch:
 */

#define	IP_SQUEUE_ENTER_NODRAIN	1
#define	IP_SQUEUE_ENTER	2
/*
 * This is part of the interface between Transport provider and
 * IP which can be used to set policy information. This is usually
 * accompanied with O_T_BIND_REQ/T_BIND_REQ.ip_bind assumes that
 * only IPSEC_POLICY_SET is there when it is found in the chain.
 * The information contained is an struct ipsec_req_t. On success
 * or failure, either the T_BIND_ACK or the T_ERROR_ACK is returned.
 * IPSEC_POLICY_SET is never returned.
 */
#define	IPSEC_POLICY_SET	M_SETOPTS

#define	IRE_IS_LOCAL(ire)	((ire != NULL) && \
				((ire)->ire_type & (IRE_LOCAL | IRE_LOOPBACK)))

#define	IRE_IS_TARGET(ire)	((ire != NULL) && \
				((ire)->ire_type != IRE_BROADCAST))

/* IP Fragmentation Reassembly Header */
typedef struct ipf_s {
	struct ipf_s	*ipf_hash_next;
	struct ipf_s	**ipf_ptphn;	/* Pointer to previous hash next. */
	uint32_t	ipf_ident;	/* Ident to match. */
	uint8_t		ipf_protocol;	/* Protocol to match. */
	uchar_t		ipf_last_frag_seen : 1;	/* Last fragment seen ? */
	time_t		ipf_timestamp;	/* Reassembly start time. */
	mblk_t		*ipf_mp;	/* mblk we live in. */
	mblk_t		*ipf_tail_mp;	/* Frag queue tail pointer. */
	int		ipf_hole_cnt;	/* Number of holes (hard-case). */
	int		ipf_end;	/* Tail end offset (0 -> hard-case). */
	uint_t		ipf_gen;	/* Frag queue generation */
	size_t		ipf_count;	/* Count of bytes used by frag */
	uint_t		ipf_nf_hdr_len; /* Length of nonfragmented header */
	in6_addr_t	ipf_v6src;	/* IPv6 source address */
	in6_addr_t	ipf_v6dst;	/* IPv6 dest address */
	uint_t		ipf_prev_nexthdr_offset; /* Offset for nexthdr value */
	uint8_t		ipf_ecn;	/* ECN info for the fragments */
	uint8_t		ipf_num_dups;	/* Number of times dup frags recvd */
	uint16_t	ipf_checksum_flags; /* Hardware checksum flags */
	uint32_t	ipf_checksum;	/* Partial checksum of fragment data */
} ipf_t;

#define	ipf_src	V4_PART_OF_V6(ipf_v6src)
#define	ipf_dst	V4_PART_OF_V6(ipf_v6dst)

typedef enum {
	IB_PKT =  0x01,
	OB_PKT = 0x02
} ip_pkt_t;

#define	UPDATE_IB_PKT_COUNT(ire)\
	{ \
	(ire)->ire_ib_pkt_count++; \
	if ((ire)->ire_ipif != NULL) { \
		/* \
		 * forwarding packet \
		 */ \
		if ((ire)->ire_type & (IRE_LOCAL|IRE_BROADCAST)) \
			atomic_add_32(&(ire)->ire_ipif->ipif_ib_pkt_count, 1);\
		else \
			atomic_add_32(&(ire)->ire_ipif->ipif_fo_pkt_count, 1);\
	} \
	}
#define	UPDATE_OB_PKT_COUNT(ire)\
	{ \
	(ire)->ire_ob_pkt_count++;\
	if ((ire)->ire_ipif != NULL) { \
		atomic_add_32(&(ire)->ire_ipif->ipif_ob_pkt_count, 1); \
	} \
	}


#define	IP_RPUT_LOCAL(q, mp, ipha, ire, recv_ill) \
{ \
	switch (ipha->ipha_protocol) { \
		case IPPROTO_UDP: \
			ip_udp_input(q, mp, ipha, ire, recv_ill); \
			break; \
		default: \
			ip_proto_input(q, mp, ipha, ire, recv_ill); \
			break; \
	} \
}

/*
 * NCE_EXPIRED is TRUE when we have a non-permanent nce that was
 * found to be REACHABLE more than ip_ire_arp_interval ms ago.
 * This macro is used to trigger re-arp of existing nce_t entries
 * so that they can be updated with the latest information.
 * nce's will get cleaned up (or updated with new info) in the following
 * circumstances:
 * - ip_ire_trash_reclaim will free nce's using ndp_cache_reclaim
 *    when memory is low,
 * - ip_arp_news, when updates are received.
 * - if the nce is NCE_EXPIRED(), it will be re-initialized to ND_INITIAL,
 *   so that a new arp request will be triggered.
 * nce_last is the timestamp that indicates when the nce_res_mp in the
 * nce_t was last updated to a valid link-layer address.  nce_last gets
 * modified/updated :
 *  - when the nce is created  or reinit-ed
 *  - every time we get a sane arp response for the nce.
 */
#define	NCE_EXPIRED(nce, ipst)	(nce->nce_last > 0 &&	\
	    ((nce->nce_flags & NCE_F_PERMANENT) == 0) &&	\
	    ((TICK_TO_MSEC(lbolt64) - nce->nce_last) > 		\
		(ipst)->ips_ip_ire_arp_interval))

#endif /* _KERNEL */

/* ICMP types */
#define	ICMP_ECHO_REPLY			0
#define	ICMP_DEST_UNREACHABLE		3
#define	ICMP_SOURCE_QUENCH		4
#define	ICMP_REDIRECT			5
#define	ICMP_ECHO_REQUEST		8
#define	ICMP_ROUTER_ADVERTISEMENT	9
#define	ICMP_ROUTER_SOLICITATION	10
#define	ICMP_TIME_EXCEEDED		11
#define	ICMP_PARAM_PROBLEM		12
#define	ICMP_TIME_STAMP_REQUEST		13
#define	ICMP_TIME_STAMP_REPLY		14
#define	ICMP_INFO_REQUEST		15
#define	ICMP_INFO_REPLY			16
#define	ICMP_ADDRESS_MASK_REQUEST	17
#define	ICMP_ADDRESS_MASK_REPLY		18

/* ICMP_TIME_EXCEEDED codes */
#define	ICMP_TTL_EXCEEDED		0
#define	ICMP_REASSEMBLY_TIME_EXCEEDED	1

/* ICMP_DEST_UNREACHABLE codes */
#define	ICMP_NET_UNREACHABLE		0
#define	ICMP_HOST_UNREACHABLE		1
#define	ICMP_PROTOCOL_UNREACHABLE	2
#define	ICMP_PORT_UNREACHABLE		3
#define	ICMP_FRAGMENTATION_NEEDED	4
#define	ICMP_SOURCE_ROUTE_FAILED	5
#define	ICMP_DEST_NET_UNKNOWN		6
#define	ICMP_DEST_HOST_UNKNOWN		7
#define	ICMP_SRC_HOST_ISOLATED		8
#define	ICMP_DEST_NET_UNREACH_ADMIN	9
#define	ICMP_DEST_HOST_UNREACH_ADMIN	10
#define	ICMP_DEST_NET_UNREACH_TOS	11
#define	ICMP_DEST_HOST_UNREACH_TOS	12

/* ICMP Header Structure */
typedef struct icmph_s {
	uint8_t		icmph_type;
	uint8_t		icmph_code;
	uint16_t	icmph_checksum;
	union {
		struct { /* ECHO request/response structure */
			uint16_t	u_echo_ident;
			uint16_t	u_echo_seqnum;
		} u_echo;
		struct { /* Destination unreachable structure */
			uint16_t	u_du_zero;
			uint16_t	u_du_mtu;
		} u_du;
		struct { /* Parameter problem structure */
			uint8_t		u_pp_ptr;
			uint8_t		u_pp_rsvd[3];
		} u_pp;
		struct { /* Redirect structure */
			ipaddr_t	u_rd_gateway;
		} u_rd;
	} icmph_u;
} icmph_t;

#define	icmph_echo_ident	icmph_u.u_echo.u_echo_ident
#define	icmph_echo_seqnum	icmph_u.u_echo.u_echo_seqnum
#define	icmph_du_zero		icmph_u.u_du.u_du_zero
#define	icmph_du_mtu		icmph_u.u_du.u_du_mtu
#define	icmph_pp_ptr		icmph_u.u_pp.u_pp_ptr
#define	icmph_rd_gateway	icmph_u.u_rd.u_rd_gateway

#define	ICMPH_SIZE	8

/*
 * Minimum length of transport layer header included in an ICMP error
 * message for it to be considered valid.
 */
#define	ICMP_MIN_TP_HDR_LEN	8

/* Aligned IP header */
typedef struct ipha_s {
	uint8_t		ipha_version_and_hdr_length;
	uint8_t		ipha_type_of_service;
	uint16_t	ipha_length;
	uint16_t	ipha_ident;
	uint16_t	ipha_fragment_offset_and_flags;
	uint8_t		ipha_ttl;
	uint8_t		ipha_protocol;
	uint16_t	ipha_hdr_checksum;
	ipaddr_t	ipha_src;
	ipaddr_t	ipha_dst;
} ipha_t;

#define	IPH_DF		0x4000	/* Don't fragment */
#define	IPH_MF		0x2000	/* More fragments to come */
#define	IPH_OFFSET	0x1FFF	/* Where the offset lives */
#define	IPH_FRAG_HDR	0x8000	/* IPv6 don't fragment bit */

/* ECN code points for IPv4 TOS byte and IPv6 traffic class octet. */
#define	IPH_ECN_NECT	0x0	/* Not ECN-Capabable Transport */
#define	IPH_ECN_ECT1	0x1	/* ECN-Capable Transport, ECT(1) */
#define	IPH_ECN_ECT0	0x2	/* ECN-Capable Transport, ECT(0) */
#define	IPH_ECN_CE	0x3	/* ECN-Congestion Experienced (CE) */

/* IP Mac info structure */
typedef struct ip_m_s {
	t_uscalar_t	ip_m_mac_type;	/* From <sys/dlpi.h> */
	int		ip_m_type;	/* From <net/if_types.h> */
	boolean_t	(*ip_m_v4mapinfo)(uint_t, uint8_t *, uint8_t *,
			    uint32_t *, ipaddr_t *);
	boolean_t	(*ip_m_v6mapinfo)(uint_t, uint8_t *, uint8_t *,
			    uint32_t *, in6_addr_t *);
	boolean_t	(*ip_m_v6intfid)(uint_t, uint8_t *, in6_addr_t *);
} ip_m_t;

/*
 * The following functions attempt to reduce the link layer dependency
 * of the IP stack. The current set of link specific operations are:
 * a. map from IPv4 class D (224.0/4) multicast address range to the link
 * layer multicast address range.
 * b. map from IPv6 multicast address range (ff00::/8) to the link
 * layer multicast address range.
 * c. derive the default IPv6 interface identifier from the link layer
 * address.
 */
#define	MEDIA_V4MINFO(ip_m, plen, bphys, maddr, hwxp, v4ptr) \
	(((ip_m)->ip_m_v4mapinfo != NULL) && \
	(*(ip_m)->ip_m_v4mapinfo)(plen, bphys, maddr, hwxp, v4ptr))
#define	MEDIA_V6INTFID(ip_m, plen, phys, v6ptr) \
	(((ip_m)->ip_m_v6intfid != NULL) && \
	(*(ip_m)->ip_m_v6intfid)(plen, phys, v6ptr))
#define	MEDIA_V6MINFO(ip_m, plen, bphys, maddr, hwxp, v6ptr) \
	(((ip_m)->ip_m_v6mapinfo != NULL) && \
	(*(ip_m)->ip_m_v6mapinfo)(plen, bphys, maddr, hwxp, v6ptr))

/* Router entry types */
#define	IRE_BROADCAST		0x0001	/* Route entry for broadcast address */
#define	IRE_DEFAULT		0x0002	/* Route entry for default gateway */
#define	IRE_LOCAL		0x0004	/* Route entry for local address */
#define	IRE_LOOPBACK		0x0008	/* Route entry for loopback address */
#define	IRE_PREFIX		0x0010	/* Route entry for prefix routes */
#define	IRE_CACHE		0x0020	/* Cached Route entry */
#define	IRE_IF_NORESOLVER	0x0040	/* Route entry for local interface */
					/* net without any address mapping. */
#define	IRE_IF_RESOLVER		0x0080	/* Route entry for local interface */
					/* net with resolver. */
#define	IRE_HOST		0x0100	/* Host route entry */
#define	IRE_HOST_REDIRECT	0x0200	/* only used for T_SVR4_OPTMGMT_REQ */

/*
 * IRE_MIPRTUN is only set on the ires in the ip_mrtun_table.
 * This ire_type must not be set for ftable and ctable routing entries.
 */
#define	IRE_MIPRTUN		0x0400	/* Reverse tunnel route entry */

#define	IRE_INTERFACE		(IRE_IF_NORESOLVER | IRE_IF_RESOLVER)
#define	IRE_OFFSUBNET		(IRE_DEFAULT | IRE_PREFIX | IRE_HOST)
#define	IRE_CACHETABLE		(IRE_CACHE | IRE_BROADCAST | IRE_LOCAL | \
				IRE_LOOPBACK)
#define	IRE_FORWARDTABLE	(IRE_INTERFACE | IRE_OFFSUBNET)

/*
 * If an IRE is marked with IRE_MARK_CONDEMNED, the last walker of
 * the bucket should delete this IRE from this bucket.
 */
#define	IRE_MARK_CONDEMNED	0x0001
/*
 * If a broadcast IRE is marked with IRE_MARK_NORECV, ip_rput will drop the
 * broadcast packets received on that interface. This is marked only
 * on broadcast ires. Employed by IPMP, where we have multiple NICs on the
 * same subnet receiving the same broadcast packet.
 */
#define	IRE_MARK_NORECV		0x0002
/*
 * IRE_CACHE marked this way won't be returned by ire_cache_lookup. Need
 * to look specifically using MATCH_IRE_MARK_HIDDEN. Used by IPMP.
 */
#define	IRE_MARK_HIDDEN		0x0004	/* Typically Used by in.mpathd */

/*
 * ire with IRE_MARK_NOADD is  created in ip_newroute_ipif, when outgoing
 * interface is specified by IP_XMIT_IF socket option. This ire is not
 * added in IRE_CACHE.  For example, this is used by mipagent to prevent
 * any entry to be added in the cache table. We do not want to add any
 * entry for a mobile-node in the routing table for foreign agent originated
 * packets. Adding routes in cache table in this case, may run the risks of
 * incorrect routing path in case of private overlapping addresses.
 */
#define	IRE_MARK_NOADD		0x0008	/* Mark not to add ire in cache */

/*
 * IRE marked with IRE_MARK_TEMPORARY means that this IRE has been used
 * either for forwarding a packet or has not been used for sending
 * traffic on TCP connections terminated on this system.  In both
 * cases, this IRE is the first to go when IRE is being cleaned up.
 */
#define	IRE_MARK_TEMPORARY	0x0010

/*
 * IRE marked with IRE_MARK_USESRC_CHECK means that while adding an IRE with
 * this mark, additional atomic checks need to be performed. For eg: by the
 * time an IRE_CACHE is created, sent up to ARP and then comes back to IP; the
 * usesrc grouping could have changed in which case we want to fail adding
 * the IRE_CACHE entry
 */
#define	IRE_MARK_USESRC_CHECK	0x0020

/*
 * IRE_MARK_PRIVATE_ADDR is used for IP_NEXTHOP. When IP_NEXTHOP is set, the
 * routing table lookup for the destination is bypassed and the packet is
 * sent directly to the specified nexthop. The associated IRE_CACHE entries
 * should be marked with IRE_MARK_PRIVATE_ADDR flag so that they don't show up
 * in regular ire cache lookups.
 */
#define	IRE_MARK_PRIVATE_ADDR	0x0040

/*
 * When we send an ARP resolution query for the nexthop gateway's ire,
 * we use esballoc to create the ire_t in the AR_ENTRY_QUERY mblk
 * chain, and mark its ire_marks with IRE_MARK_UNCACHED. This flag
 * indicates that information from ARP has not been transferred to a
 * permanent IRE_CACHE entry. The flag is reset only when the
 * information is successfully transferred to an ire_cache entry (in
 * ire_add()). Attempting to free the AR_ENTRY_QUERY mblk chain prior
 * to ire_add (e.g., from arp, or from ip`ip_wput_nondata) will
 * require that the resources (incomplete ire_cache and/or nce) must
 * be cleaned up. The free callback routine (ire_freemblk()) checks
 * for IRE_MARK_UNCACHED to see if any resources that are pinned down
 * will need to be cleaned up or not.
 */

#define	IRE_MARK_UNCACHED	0x0080

/*
 * The comment below (and for other netstack_t references) refers
 * to the fact that we only do netstack_hold in particular cases,
 * such as the references from open streams (ill_t and conn_t's
 * pointers). Internally within IP we rely on IP's ability to cleanup e.g.
 * ire_t's when an ill goes away.
 */
typedef struct ire_expire_arg_s {
	int		iea_flush_flag;
	ip_stack_t	*iea_ipst;	/* Does not have a netstack_hold */
} ire_expire_arg_t;

/* Flags with ire_expire routine */
#define	FLUSH_ARP_TIME		0x0001	/* ARP info potentially stale timer */
#define	FLUSH_REDIRECT_TIME	0x0002	/* Redirects potentially stale */
#define	FLUSH_MTU_TIME		0x0004	/* Include path MTU per RFC 1191 */

/* Arguments to ire_flush_cache() */
#define	IRE_FLUSH_DELETE	0
#define	IRE_FLUSH_ADD		1

/*
 * Open/close synchronization flags.
 * These are kept in a separate field in the conn and the synchronization
 * depends on the atomic 32 bit access to that field.
 */
#define	CONN_CLOSING		0x01	/* ip_close waiting for ip_wsrv */
#define	CONN_IPSEC_LOAD_WAIT	0x02	/* waiting for load */
#define	CONN_CONDEMNED		0x04	/* conn is closing, no more refs */
#define	CONN_INCIPIENT		0x08	/* conn not yet visible, no refs */
#define	CONN_QUIESCED		0x10	/* conn is now quiescent */

/*
 * Parameter to ip_output giving the identity of the caller.
 * IP_WSRV means the packet was enqueued in the STREAMS queue
 * due to flow control and is now being reprocessed in the context of
 * the STREAMS service procedure, consequent to flow control relief.
 * IRE_SEND means the packet is being reprocessed consequent to an
 * ire cache creation and addition and this may or may not be happening
 * in the service procedure context. Anything other than the above 2
 * cases is identified as IP_WPUT. Most commonly this is the case of
 * packets coming down from the application.
 */
#ifdef _KERNEL
#define	IP_WSRV			1	/* Called from ip_wsrv */
#define	IP_WPUT			2	/* Called from ip_wput */
#define	IRE_SEND		3	/* Called from ire_send */

/*
 * Extra structures need for per-src-addr filtering (IGMPv3/MLDv2)
 */
#define	MAX_FILTER_SIZE	64

typedef struct slist_s {
	int		sl_numsrc;
	in6_addr_t	sl_addr[MAX_FILTER_SIZE];
} slist_t;

/*
 * Following struct is used to maintain retransmission state for
 * a multicast group.  One rtx_state_t struct is an in-line field
 * of the ilm_t struct; the slist_ts in the rtx_state_t struct are
 * alloc'd as needed.
 */
typedef struct rtx_state_s {
	uint_t		rtx_timer;	/* retrans timer */
	int		rtx_cnt;	/* retrans count */
	int		rtx_fmode_cnt;	/* retrans count for fmode change */
	slist_t		*rtx_allow;
	slist_t		*rtx_block;
} rtx_state_t;

/*
 * Used to construct list of multicast address records that will be
 * sent in a single listener report.
 */
typedef struct mrec_s {
	struct mrec_s	*mrec_next;
	uint8_t		mrec_type;
	uint8_t		mrec_auxlen;	/* currently unused */
	in6_addr_t	mrec_group;
	slist_t		mrec_srcs;
} mrec_t;

/* Group membership list per upper conn */
/*
 * XXX add ilg info for ifaddr/ifindex.
 * XXX can we make ilg survive an ifconfig unplumb + plumb
 * by setting the ipif/ill to NULL and recover that later?
 *
 * ilg_ipif is used by IPv4 as multicast groups are joined using an interface
 * address (ipif).
 * ilg_ill is used by IPv6 as multicast groups are joined using an interface
 * index (phyint->phyint_ifindex).
 * ilg_ill is NULL for IPv4 and ilg_ipif is NULL for IPv6.
 *
 * ilg records the state of multicast memberships of a socket end point.
 * ilm records the state of multicast memberships with the driver and is
 * maintained per interface.
 *
 * Notes :
 *
 * 1) There is no direct link between a given ilg and ilm. If the
 *    application has joined a group G with ifindex I, we will have
 *    an ilg with ilg_v6group and ilg_ill. There will be a corresponding
 *    ilm with ilm_ill/ilm_v6addr recording the multicast membership.
 *    To delete the membership,
 *
 *		a) Search for ilg matching on G and I with ilg_v6group
 *		   and ilg_ill. Delete ilg_ill.
 *		b) Search the corresponding ilm matching on G and I with
 *		   ilm_v6addr and ilm_ill. Delete ilm.
 *
 *    In IPv4, the only difference is, we look using ipifs instead of
 *    ills.
 *
 * 2) With IP multipathing, we want to keep receiving even after the
 *    interface has failed. We do this by moving multicast memberships
 *    to a new_ill within the group. This is acheived by sending
 *    DL_DISABMULTI_REQS on ilg_ill/ilm_ill and sending DL_ENABMULTIREQS
 *    on the new_ill and changing ilg_ill/ilm_ill to new_ill. But, we
 *    need to be able to delete memberships which will still come down
 *    with the ifindex of the old ill which is what the application
 *    knows of. Thus we store the ilm_/ilg_orig_ifindex to keep track
 *    of where we joined initially so that we can lookup even after we
 *    moved the membership. It is also used for moving back the membership
 *    when the old ill has been repaired. This is done by looking up for
 *    ilms with ilm_orig_ifindex matching on the old ill's ifindex. Only
 *    ilms actually move from old ill to new ill. ilgs don't move (just
 *    the ilg_ill is changed when it moves) as it just records the state
 *    of the application that has joined a group G where as ilm records
 *    the state joined with the driver. Thus when we send DL_XXXMULTI_REQs
 *    we also need to keep the ilm in the right ill.
 *
 *    In IPv4, as ipifs move from old ill to new_ill, ilgs and ilms move
 *    implicitly as we use only ipifs in IPv4. Thus, one can always lookup
 *    a given ilm/ilg even after it fails without the support of
 *    orig_ifindex. We move ilms still to record the driver state as
 *    mentioned above.
 */

/*
 * The ilg_t and ilm_t members are protected by ipsq. They can be changed only
 * by a thread executing in the ipsq. In other words add/delete of a
 * multicast group has to execute in the ipsq.
 */
#define	ILG_DELETED	0x1		/* ilg_flags */
typedef struct ilg_s {
	in6_addr_t	ilg_v6group;
	struct ipif_s	*ilg_ipif;	/* Logical interface we are member on */
	struct ill_s	*ilg_ill;	/* Used by IPv6 */
	int		ilg_orig_ifindex; /* Interface originally joined on */
	uint_t		ilg_flags;
	mcast_record_t	ilg_fmode;	/* MODE_IS_INCLUDE/MODE_IS_EXCLUDE */
	slist_t		*ilg_filter;
} ilg_t;


/*
 * Multicast address list entry for lower ill.
 * ilm_ipif is used by IPv4 as multicast groups are joined using ipif.
 * ilm_ill is used by IPv6 as multicast groups are joined using ill.
 * ilm_ill is NULL for IPv4 and ilm_ipif is NULL for IPv6.
 *
 * The comment below (and for other netstack_t references) refers
 * to the fact that we only do netstack_hold in particular cases,
 * such as the references from open streams (ill_t and conn_t's
 * pointers). Internally within IP we rely on IP's ability to cleanup e.g.
 * ire_t's when an ill goes away.
 */
#define	ILM_DELETED	0x1		/* ilm_flags */
typedef struct ilm_s {
	in6_addr_t	ilm_v6addr;
	int		ilm_refcnt;
	uint_t		ilm_timer;	/* IGMP/MLD query resp timer, in msec */
	struct ipif_s	*ilm_ipif;	/* Back pointer to ipif for IPv4 */
	struct ilm_s	*ilm_next;	/* Linked list for each ill */
	uint_t		ilm_state;	/* state of the membership */
	struct ill_s	*ilm_ill;	/* Back pointer to ill for IPv6 */
	int		ilm_orig_ifindex;  /* V6_MULTICAST_IF/ilm_ipif index */
	uint_t		ilm_flags;
	boolean_t	ilm_is_new;	/* new ilm */
	boolean_t	ilm_notify_driver; /* Need to notify the driver */
	zoneid_t	ilm_zoneid;
	int		ilm_no_ilg_cnt;	/* number of joins w/ no ilg */
	mcast_record_t	ilm_fmode;	/* MODE_IS_INCLUDE/MODE_IS_EXCLUDE */
	slist_t		*ilm_filter;	/* source filter list */
	slist_t		*ilm_pendsrcs;	/* relevant src addrs for pending req */
	rtx_state_t	ilm_rtx;	/* SCR retransmission state */
	ip_stack_t	*ilm_ipst;	/* Does not have a netstack_hold */
} ilm_t;

#define	ilm_addr	V4_PART_OF_V6(ilm_v6addr)

/*
 * ilm_walker_cleanup needs to execute when the ilm_walker_cnt goes down to
 * zero. In addition it needs to block new walkers while it is unlinking ilm's
 * from the list. Thus simple atomics for the ill_ilm_walker_cnt don't suffice.
 */
#define	ILM_WALKER_HOLD(ill)    {               \
	mutex_enter(&(ill)->ill_lock);          \
	ill->ill_ilm_walker_cnt++;              \
	mutex_exit(&(ill)->ill_lock);           \
}

#define	ILM_WALKER_RELE(ill)	{ 		\
	mutex_enter(&(ill)->ill_lock);		\
	(ill)->ill_ilm_walker_cnt--;		\
	if ((ill)->ill_ilm_walker_cnt == 0 && (ill)->ill_ilm_cleanup_reqd) \
		ilm_walker_cleanup(ill);	\
	mutex_exit(&(ill)->ill_lock);		\
}

/*
 * Soft reference to an IPsec SA.
 *
 * On relative terms, conn's can be persistant (living as long as the
 * processes which create them), while SA's are ephemeral (dying when
 * they hit their time-based or byte-based lifetimes).
 *
 * We could hold a hard reference to an SA from an ipsec_latch_t,
 * but this would cause expired SA's to linger for a potentially
 * unbounded time.
 *
 * Instead, we remember the hash bucket number and bucket generation
 * in addition to the pointer.  The bucket generation is incremented on
 * each deletion.
 */
typedef struct ipsa_ref_s
{
	struct ipsa_s	*ipsr_sa;
	struct isaf_s	*ipsr_bucket;
	uint64_t	ipsr_gen;
} ipsa_ref_t;

/*
 * IPsec "latching" state.
 *
 * In the presence of IPsec policy, fully-bound conn's bind a connection
 * to more than just the 5-tuple, but also a specific IPsec action and
 * identity-pair.
 *
 * As an optimization, we also cache soft references to IPsec SA's
 * here so that we can fast-path around most of the work needed for
 * outbound IPsec SA selection.
 *
 * Were it not for TCP's detached connections, this state would be
 * in-line in conn_t; instead, this is in a separate structure so it
 * can be handed off to TCP when a connection is detached.
 */
typedef struct ipsec_latch_s
{
	kmutex_t	ipl_lock;
	uint32_t	ipl_refcnt;

	uint64_t	ipl_unique;
	struct ipsec_policy_s	*ipl_in_policy; /* latched policy (in) */
	struct ipsec_policy_s	*ipl_out_policy; /* latched policy (out) */
	struct ipsec_action_s	*ipl_in_action;	/* latched action (in) */
	struct ipsec_action_s	*ipl_out_action; /* latched action (out) */
	cred_t		*ipl_local_id;
	struct ipsid_s	*ipl_local_cid;
	struct ipsid_s	*ipl_remote_cid;
	unsigned int
			ipl_out_action_latched : 1,
			ipl_in_action_latched : 1,
			ipl_out_policy_latched : 1,
			ipl_in_policy_latched : 1,

			ipl_ids_latched : 1,

			ipl_pad_to_bit_31 : 27;

	ipsa_ref_t	ipl_ref[2]; /* 0: ESP, 1: AH */

} ipsec_latch_t;

#define	IPLATCH_REFHOLD(ipl) { \
	atomic_add_32(&(ipl)->ipl_refcnt, 1);		\
	ASSERT((ipl)->ipl_refcnt != 0);			\
}

#define	IPLATCH_REFRELE(ipl, ns) {				\
	ASSERT((ipl)->ipl_refcnt != 0);				\
	membar_exit();						\
	if (atomic_add_32_nv(&(ipl)->ipl_refcnt, -1) == 0)	\
		iplatch_free(ipl, ns);			\
}

/*
 * peer identity structure.
 */

typedef struct conn_s conn_t;

/*
 * The old IP client structure "ipc_t" is gone. All the data is stored in the
 * connection structure "conn_t" now. The mapping of old and new fields looks
 * like this:
 *
 * ipc_ulp			conn_ulp
 * ipc_rq			conn_rq
 * ipc_wq			conn_wq
 *
 * ipc_laddr			conn_src
 * ipc_faddr			conn_rem
 * ipc_v6laddr			conn_srcv6
 * ipc_v6faddr			conn_remv6
 *
 * ipc_lport			conn_lport
 * ipc_fport			conn_fport
 * ipc_ports			conn_ports
 *
 * ipc_policy			conn_policy
 * ipc_latch			conn_latch
 *
 * ipc_irc_lock			conn_lock
 * ipc_ire_cache		conn_ire_cache
 *
 * ipc_state_flags		conn_state_flags
 * ipc_outgoing_ill		conn_outgoing_ill
 *
 * ipc_dontroute 		conn_dontroute
 * ipc_loopback 		conn_loopback
 * ipc_broadcast		conn_broadcast
 * ipc_reuseaddr		conn_reuseaddr
 *
 * ipc_multicast_loop		conn_multicast_loop
 * ipc_multi_router		conn_multi_router
 * ipc_priv_stream 		conn_priv_stream
 * ipc_draining 		conn_draining
 *
 * ipc_did_putbq		conn_did_putbq
 * ipc_unspec_src		conn_unspec_src
 * ipc_policy_cached		conn_policy_cached
 *
 * ipc_in_enforce_policy 	conn_in_enforce_policy
 * ipc_out_enforce_policy 	conn_out_enforce_policy
 * ipc_af_isv6			conn_af_isv6
 * ipc_pkt_isv6			conn_pkt_isv6
 *
 * ipc_ipv6_recvpktinfo		conn_ipv6_recvpktinfo
 *
 * ipc_ipv6_recvhoplimit	conn_ipv6_recvhoplimit
 * ipc_ipv6_recvhopopts		conn_ipv6_recvhopopts
 * ipc_ipv6_recvdstopts		conn_ipv6_recvdstopts
 *
 * ipc_ipv6_recvrthdr 		conn_ipv6_recvrthdr
 * ipc_ipv6_recvrtdstopts	conn_ipv6_recvrtdstopts
 * ipc_fully_bound		conn_fully_bound
 *
 * ipc_recvif			conn_recvif
 *
 * ipc_recvslla 		conn_recvslla
 * ipc_acking_unbind 		conn_acking_unbind
 * ipc_pad_to_bit_31 		conn_pad_to_bit_31
 *
 * ipc_xmit_if_ill		conn_xmit_if_ill
 * ipc_nofailover_ill		conn_nofailover_ill
 *
 * ipc_proto			conn_proto
 * ipc_incoming_ill		conn_incoming_ill
 * ipc_outgoing_pill		conn_outgoing_pill
 * ipc_pending_ill		conn_pending_ill
 * ipc_unbind_mp		conn_unbind_mp
 * ipc_ilg			conn_ilg
 * ipc_ilg_allocated		conn_ilg_allocated
 * ipc_ilg_inuse		conn_ilg_inuse
 * ipc_ilg_walker_cnt		conn_ilg_walker_cnt
 * ipc_refcv			conn_refcv
 * ipc_multicast_ipif		conn_multicast_ipif
 * ipc_multicast_ill		conn_multicast_ill
 * ipc_orig_bound_ifindex	conn_orig_bound_ifindex
 * ipc_orig_multicast_ifindex	conn_orig_multicast_ifindex
 * ipc_orig_xmit_ifindex	conn_orig_xmit_ifindex
 * ipc_drain_next		conn_drain_next
 * ipc_drain_prev		conn_drain_prev
 * ipc_idl			conn_idl
 */

/*
 * This is used to match an inbound/outbound datagram with
 * policy.
 */

typedef	struct ipsec_selector {
	in6_addr_t	ips_local_addr_v6;
	in6_addr_t	ips_remote_addr_v6;
	uint16_t	ips_local_port;
	uint16_t	ips_remote_port;
	uint8_t		ips_icmp_type;
	uint8_t		ips_icmp_code;
	uint8_t		ips_protocol;
	uint8_t		ips_isv4 : 1,
			ips_is_icmp_inv_acq: 1;
} ipsec_selector_t;

/*
 * Note that we put v4 addresses in the *first* 32-bit word of the
 * selector rather than the last to simplify the prefix match/mask code
 * in spd.c
 */
#define	ips_local_addr_v4 ips_local_addr_v6.s6_addr32[0]
#define	ips_remote_addr_v4 ips_remote_addr_v6.s6_addr32[0]

/* Values used in IP by IPSEC Code */
#define		IPSEC_OUTBOUND		B_TRUE
#define		IPSEC_INBOUND		B_FALSE

/*
 * There are two variants in policy failures. The packet may come in
 * secure when not needed (IPSEC_POLICY_???_NOT_NEEDED) or it may not
 * have the desired level of protection (IPSEC_POLICY_MISMATCH).
 */
#define	IPSEC_POLICY_NOT_NEEDED		0
#define	IPSEC_POLICY_MISMATCH		1
#define	IPSEC_POLICY_AUTH_NOT_NEEDED	2
#define	IPSEC_POLICY_ENCR_NOT_NEEDED	3
#define	IPSEC_POLICY_SE_NOT_NEEDED	4
#define	IPSEC_POLICY_MAX		5	/* Always max + 1. */

/*
 * Folowing macro is used whenever the code does not know whether there
 * is a M_CTL present in the front and it needs to examine the actual mp
 * i.e the IP header. As a M_CTL message could be in the front, this
 * extracts the packet into mp and the M_CTL mp into first_mp. If M_CTL
 * mp is not present, both first_mp and mp point to the same message.
 */
#define	EXTRACT_PKT_MP(mp, first_mp, mctl_present)	\
	(first_mp) = (mp);				\
	if ((mp)->b_datap->db_type == M_CTL) {		\
		(mp) = (mp)->b_cont;			\
		(mctl_present) = B_TRUE;		\
	} else {					\
		(mctl_present) = B_FALSE;		\
	}

/*
 * Check with IPSEC inbound policy if
 *
 * 1) per-socket policy is present - indicated by conn_in_enforce_policy.
 * 2) Or if we have not cached policy on the conn and the global policy is
 *    non-empty.
 */
#define	CONN_INBOUND_POLICY_PRESENT(connp, ipss)	\
	((connp)->conn_in_enforce_policy ||		\
	(!((connp)->conn_policy_cached) && 		\
	(ipss)->ipsec_inbound_v4_policy_present))

#define	CONN_INBOUND_POLICY_PRESENT_V6(connp, ipss)	\
	((connp)->conn_in_enforce_policy ||		\
	(!(connp)->conn_policy_cached &&		\
	(ipss)->ipsec_inbound_v6_policy_present))

#define	CONN_OUTBOUND_POLICY_PRESENT(connp, ipss)	\
	((connp)->conn_out_enforce_policy ||		\
	(!((connp)->conn_policy_cached) &&		\
	(ipss)->ipsec_outbound_v4_policy_present))

#define	CONN_OUTBOUND_POLICY_PRESENT_V6(connp, ipss)	\
	((connp)->conn_out_enforce_policy ||		\
	(!(connp)->conn_policy_cached &&		\
	(ipss)->ipsec_outbound_v6_policy_present))

/*
 * Information cached in IRE for upper layer protocol (ULP).
 *
 * Notice that ire_max_frag is not included in the iulp_t structure, which
 * it may seem that it should.  But ire_max_frag cannot really be cached.  It
 * is fixed for each interface.  For MTU found by PMTUd, we may want to cache
 * it.  But currently, we do not do that.
 */
typedef struct iulp_s {
	boolean_t	iulp_set;	/* Is any metric set? */
	uint32_t	iulp_ssthresh;	/* Slow start threshold (TCP). */
	clock_t		iulp_rtt;	/* Guestimate in millisecs. */
	clock_t		iulp_rtt_sd;	/* Cached value of RTT variance. */
	uint32_t	iulp_spipe;	/* Send pipe size. */
	uint32_t	iulp_rpipe;	/* Receive pipe size. */
	uint32_t	iulp_rtomax;	/* Max round trip timeout. */
	uint32_t	iulp_sack;	/* Use SACK option (TCP)? */
	uint32_t
		iulp_tstamp_ok : 1,	/* Use timestamp option (TCP)? */
		iulp_wscale_ok : 1,	/* Use window scale option (TCP)? */
		iulp_ecn_ok : 1,	/* Enable ECN (for TCP)? */
		iulp_pmtud_ok : 1,	/* Enable PMTUd? */

		iulp_not_used : 28;
} iulp_t;

/* Zero iulp_t. */
extern const iulp_t ire_uinfo_null;

/*
 * The conn drain list structure.
 * The list is protected by idl_lock. Each conn_t inserted in the list
 * points back at this idl_t using conn_idl. IP primes the draining of the
 * conns queued in these lists, by qenabling the 1st conn of each list. This
 * occurs when STREAMS backenables ip_wsrv on the IP module. Each conn instance
 * of ip_wsrv successively qenables the next conn in the list.
 * idl_lock protects all other members of idl_t and conn_drain_next
 * and conn_drain_prev of conn_t. The conn_lock protects IPCF_DRAIN_DISABLED
 * flag of the conn_t and conn_idl.
 */
typedef struct idl_s {
	conn_t		*idl_conn;		/* Head of drain list */
	kmutex_t	idl_lock;		/* Lock for this list */
	conn_t		*idl_conn_draining;	/* conn that is draining */
	uint32_t
		idl_repeat : 1,			/* Last conn must re-enable */
						/* drain list again */
		idl_unused : 31;
} idl_t;

#define	CONN_DRAIN_LIST_LOCK(connp)	(&((connp)->conn_idl->idl_lock))
/*
 * Interface route structure which holds the necessary information to recreate
 * routes that are tied to an interface (namely where ire_ipif != NULL).
 * These routes which were initially created via a routing socket or via the
 * SIOCADDRT ioctl may be gateway routes (RTF_GATEWAY being set) or may be
 * traditional interface routes.  When an interface comes back up after being
 * marked down, this information will be used to recreate the routes.  These
 * are part of an mblk_t chain that hangs off of the IPIF (ipif_saved_ire_mp).
 */
typedef struct ifrt_s {
	ushort_t	ifrt_type;		/* Type of IRE */
	in6_addr_t	ifrt_v6addr;		/* Address IRE represents. */
	in6_addr_t	ifrt_v6gateway_addr;	/* Gateway if IRE_OFFSUBNET */
	in6_addr_t	ifrt_v6src_addr;	/* Src addr if RTF_SETSRC */
	in6_addr_t	ifrt_v6mask;		/* Mask for matching IRE. */
	uint32_t	ifrt_flags;		/* flags related to route */
	uint_t		ifrt_max_frag;		/* MTU (next hop or path). */
	iulp_t		ifrt_iulp_info;		/* Cached IRE ULP info. */
} ifrt_t;

#define	ifrt_addr		V4_PART_OF_V6(ifrt_v6addr)
#define	ifrt_gateway_addr	V4_PART_OF_V6(ifrt_v6gateway_addr)
#define	ifrt_src_addr		V4_PART_OF_V6(ifrt_v6src_addr)
#define	ifrt_mask		V4_PART_OF_V6(ifrt_v6mask)

/* Number of IP addresses that can be hosted on a physical interface */
#define	MAX_ADDRS_PER_IF	8192
/*
 * Number of Source addresses to be considered for source address
 * selection. Used by ipif_select_source[_v6].
 */
#define	MAX_IPIF_SELECT_SOURCE	50

#ifdef IP_DEBUG
/*
 * Tracing refholds and refreleases for debugging. Existing tracing mechanisms
 * do not allow the granularity need to trace refrences to ipif/ill/ire's. This
 * mechanism should be revisited once dtrace is available.
 */
#define	IP_STACK_DEPTH	15
typedef struct tr_buf_s {
	int	tr_depth;
	pc_t	tr_stack[IP_STACK_DEPTH];
} tr_buf_t;

typedef struct th_trace_s {
	struct	th_trace_s *th_next;
	struct	th_trace_s **th_prev;
	kthread_t	*th_id;
	int	th_refcnt;
	uint_t	th_trace_lastref;
#define	TR_BUF_MAX	38
	tr_buf_t th_trbuf[TR_BUF_MAX];
} th_trace_t;
#endif

/* The following are ipif_state_flags */
#define	IPIF_CONDEMNED		0x1	/* The ipif is being removed */
#define	IPIF_CHANGING		0x2	/* A critcal ipif field is changing */
#define	IPIF_MOVING		0x8	/* The ipif is being moved */
#define	IPIF_SET_LINKLOCAL	0x10	/* transient flag during bringup */
#define	IPIF_ZERO_SOURCE	0x20	/* transient flag during bringup */

/* IP interface structure, one per local address */
typedef struct ipif_s {
	struct	ipif_s	*ipif_next;
	struct	ill_s	*ipif_ill;	/* Back pointer to our ill */
	int	ipif_id;		/* Logical unit number */
	uint_t	ipif_mtu;		/* Starts at ipif_ill->ill_max_frag */
	uint_t	ipif_saved_mtu;		/* Save of mtu during ipif_move() */
	in6_addr_t ipif_v6lcl_addr;	/* Local IP address for this if. */
	in6_addr_t ipif_v6src_addr;	/* Source IP address for this if. */
	in6_addr_t ipif_v6subnet;	/* Subnet prefix for this if. */
	in6_addr_t ipif_v6net_mask;	/* Net mask for this interface. */
	in6_addr_t ipif_v6brd_addr;	/* Broadcast addr for this interface. */
	in6_addr_t ipif_v6pp_dst_addr;	/* Point-to-point dest address. */
	uint64_t ipif_flags;		/* Interface flags. */
	uint_t	ipif_metric;		/* BSD if metric, for compatibility. */
	uint_t	ipif_ire_type;		/* IRE_LOCAL or IRE_LOOPBACK */
	mblk_t	*ipif_arp_del_mp;	/* Allocated at time arp comes up, to */
					/* prevent awkward out of mem */
					/* condition later */
	mblk_t	*ipif_saved_ire_mp;	/* Allocated for each extra */
					/* IRE_IF_NORESOLVER/IRE_IF_RESOLVER */
					/* on this interface so that they */
					/* can survive ifconfig down. */
	kmutex_t ipif_saved_ire_lock;	/* Protects ipif_saved_ire_mp */

	mrec_t	*ipif_igmp_rpt;		/* List of group memberships which */
					/* will be reported on.  Used when */
					/* handling an igmp timeout.	   */

	/*
	 * The packet counts in the ipif contain the sum of the
	 * packet counts in dead IREs that were affiliated with
	 * this ipif.
	 */
	uint_t	ipif_fo_pkt_count;	/* Forwarded thru our dead IREs */
	uint_t	ipif_ib_pkt_count;	/* Inbound packets for our dead IREs */
	uint_t	ipif_ob_pkt_count;	/* Outbound packets to our dead IREs */
	/* Exclusive bit fields, protected by ipsq_t */
	unsigned int
		ipif_multicast_up : 1,	/* We have joined the allhosts group */
		ipif_solmcast_up : 1,	/* We joined solicited node mcast */
		ipif_replace_zero : 1,	/* Replacement for zero */
		ipif_was_up : 1,	/* ipif was up before */

		ipif_addr_ready : 1,	/* DAD is done */
		ipif_was_dup : 1,	/* DAD had failed */
		ipif_pad_to_31 : 26;

	int	ipif_orig_ifindex;	/* ifindex before SLIFFAILOVER */
	uint_t	ipif_seqid;		/* unique index across all ills */
	uint_t	ipif_orig_ipifid;	/* ipif_id before SLIFFAILOVER */
	uint_t	ipif_state_flags;	/* See IPIF_* flag defs above */
	uint_t	ipif_refcnt;		/* active consistent reader cnt */
	uint_t	ipif_ire_cnt;		/* Number of ire's referencing ipif */
	uint_t	ipif_saved_ire_cnt;
	zoneid_t
		ipif_zoneid;		/* zone ID number */
	timeout_id_t ipif_recovery_id;	/* Timer for DAD recovery */
#ifdef ILL_DEBUG
#define	IP_TR_HASH_MAX	64
	th_trace_t *ipif_trace[IP_TR_HASH_MAX];
	boolean_t	ipif_trace_disable;	/* True when alloc fails */
#endif
} ipif_t;

/*
 * The following table lists the protection levels of the various members
 * of the ipif_t. The following notation is used.
 *
 * Write once - Written to only once at the time of bringing up
 * the interface and can be safely read after the bringup without any lock.
 *
 * ipsq - Need to execute in the ipsq to perform the indicated access.
 *
 * ill_lock - Need to hold this mutex to perform the indicated access.
 *
 * ill_g_lock - Need to hold this rw lock as reader/writer for read access or
 * write access respectively.
 *
 * down ill - Written to only when the ill is down (i.e all ipifs are down)
 * up ill - Read only when the ill is up (i.e. at least 1 ipif is up)
 *
 *		 Table of ipif_t members and their protection
 *
 * ipif_next		ill_g_lock		ill_g_lock
 * ipif_ill		ipsq + down ipif	write once
 * ipif_id		ipsq + down ipif	write once
 * ipif_mtu		ipsq
 * ipif_v6lcl_addr	ipsq + down ipif	up ipif
 * ipif_v6src_addr	ipsq + down ipif	up ipif
 * ipif_v6subnet	ipsq + down ipif	up ipif
 * ipif_v6net_mask	ipsq + down ipif	up ipif
 *
 * ipif_v6brd_addr
 * ipif_v6pp_dst_addr
 * ipif_flags		ill_lock		ill_lock
 * ipif_metric
 * ipif_ire_type	ipsq + down ill		up ill
 *
 * ipif_arp_del_mp	ipsq			ipsq
 * ipif_saved_ire_mp	ipif_saved_ire_lock	ipif_saved_ire_lock
 * ipif_igmp_rpt	ipsq			ipsq
 *
 * ipif_fo_pkt_count	Approx
 * ipif_ib_pkt_count	Approx
 * ipif_ob_pkt_count	Approx
 *
 * bit fields		ill_lock		ill_lock
 *
 * ipif_orig_ifindex	ipsq			None
 * ipif_orig_ipifid	ipsq			None
 * ipif_seqid		ipsq			Write once
 *
 * ipif_state_flags	ill_lock		ill_lock
 * ipif_refcnt		ill_lock		ill_lock
 * ipif_ire_cnt		ill_lock		ill_lock
 * ipif_saved_ire_cnt
 */

#define	IP_TR_HASH(tid)	((((uintptr_t)tid) >> 6) & (IP_TR_HASH_MAX - 1))

#ifdef ILL_DEBUG
#define	IPIF_TRACE_REF(ipif)	ipif_trace_ref(ipif)
#define	ILL_TRACE_REF(ill)	ill_trace_ref(ill)
#define	IPIF_UNTRACE_REF(ipif)	ipif_untrace_ref(ipif)
#define	ILL_UNTRACE_REF(ill)	ill_untrace_ref(ill)
#define	ILL_TRACE_CLEANUP(ill)	ill_trace_cleanup(ill)
#define	IPIF_TRACE_CLEANUP(ipif)	ipif_trace_cleanup(ipif)
#else
#define	IPIF_TRACE_REF(ipif)
#define	ILL_TRACE_REF(ill)
#define	IPIF_UNTRACE_REF(ipif)
#define	ILL_UNTRACE_REF(ill)
#define	ILL_TRACE_CLEANUP(ill)
#define	IPIF_TRACE_CLEANUP(ipif)
#endif

/* IPv4 compatability macros */
#define	ipif_lcl_addr		V4_PART_OF_V6(ipif_v6lcl_addr)
#define	ipif_src_addr		V4_PART_OF_V6(ipif_v6src_addr)
#define	ipif_subnet		V4_PART_OF_V6(ipif_v6subnet)
#define	ipif_net_mask		V4_PART_OF_V6(ipif_v6net_mask)
#define	ipif_brd_addr		V4_PART_OF_V6(ipif_v6brd_addr)
#define	ipif_pp_dst_addr	V4_PART_OF_V6(ipif_v6pp_dst_addr)

/* Macros for easy backreferences to the ill. */
#define	ipif_wq			ipif_ill->ill_wq
#define	ipif_rq			ipif_ill->ill_rq
#define	ipif_net_type		ipif_ill->ill_net_type
#define	ipif_resolver_mp	ipif_ill->ill_resolver_mp
#define	ipif_ipif_up_count	ipif_ill->ill_ipif_up_count
#define	ipif_bcast_mp		ipif_ill->ill_bcast_mp
#define	ipif_type		ipif_ill->ill_type
#define	ipif_isv6		ipif_ill->ill_isv6

#define	SIOCLIFADDR_NDX 112	/* ndx of SIOCLIFADDR in the ndx ioctl table */

/*
 * mode value for ip_ioctl_finish for finishing an ioctl
 */
#define	CONN_CLOSE	1		/* No mi_copy */
#define	COPYOUT		2		/* do an mi_copyout if needed */
#define	NO_COPYOUT	3		/* do an mi_copy_done */
#define	IPI2MODE(ipi)	((ipi)->ipi_flags & IPI_GET_CMD ? COPYOUT : NO_COPYOUT)

/*
 * The IP-MT design revolves around the serialization object ipsq_t.
 * It is associated with an IPMP group. If IPMP is not enabled, there is
 * 1 ipsq_t per phyint. Eg. an ipsq_t would cover both hme0's IPv4 stream
 *
 * ipsq_lock protects
 *	ipsq_reentry_cnt, ipsq_writer, ipsq_xopq_mphead, ipsq_xopq_mptail,
 *	ipsq_mphead, ipsq_mptail, ipsq_split
 *
 *	ipsq_pending_ipif, ipsq_current_ipif, ipsq_pending_mp, ipsq_flags,
 *	ipsq_waitfor
 *
 * The fields in the last line above below are set mostly by a writer thread
 * But there is an exception in the last call to ipif_ill_refrele_tail which
 * could also race with a conn close which could be cleaning up the
 * fields. So we choose to protect using ipsq_lock instead of depending on
 * the property of the writer.
 * ill_g_lock protects
 *	ipsq_refs, ipsq_phyint_list
 */
typedef struct ipsq_s {
	kmutex_t ipsq_lock;
	int	ipsq_reentry_cnt;
	kthread_t *ipsq_writer;		/* current owner (thread id) */
	int	ipsq_flags;
	mblk_t	*ipsq_xopq_mphead;	/* list of excl ops mostly ioctls */
	mblk_t	*ipsq_xopq_mptail;
	mblk_t	*ipsq_mphead;		/* msgs on ipsq linked thru b_next */
	mblk_t	*ipsq_mptail;		/* msgs on ipsq linked thru b_next */
	int	ipsq_current_ioctl;	/* current ioctl, or 0 if no ioctl */
	ipif_t	*ipsq_current_ipif;	/* ipif associated with current op */
	ipif_t	*ipsq_pending_ipif;	/* ipif associated w. ipsq_pending_mp */
	mblk_t	*ipsq_pending_mp;	/* current ioctl mp while waiting for */
					/* response from another module */
	struct	ipsq_s	*ipsq_next;	/* list of all syncq's (ipsq_g_list) */
	uint_t		ipsq_refs;	/* Number of phyints on this ipsq */
	struct phyint	*ipsq_phyint_list; /* List of phyints on this ipsq */
	boolean_t	ipsq_split;	/* ipsq may need to be split */
	int		ipsq_waitfor;	/* Values encoded below */
	char		ipsq_name[LIFNAMSIZ+1];	/* same as phyint_groupname */

#ifdef ILL_DEBUG
	int		ipsq_depth;	/* debugging aid */
	pc_t		ipsq_stack[IP_STACK_DEPTH];	/* debugging aid */
#endif
	ip_stack_t	*ipsq_ipst;	/* Does not have a netstack_hold */
} ipsq_t;

/* ipsq_flags */
#define	IPSQ_GROUP	0x1	/* This ipsq belongs to an IPMP group */

/*
 * ipsq_waitfor:
 *
 * IPIF_DOWN	1	ipif_down waiting for refcnts to drop
 * ILL_DOWN	2	ill_down waiting for refcnts to drop
 * IPIF_FREE	3	ipif_free waiting for refcnts to drop
 * ILL_FREE	4	ill unplumb waiting for refcnts to drop
 * ILL_MOVE_OK	5	failover waiting for refcnts to drop
 */

enum { IPIF_DOWN = 1, ILL_DOWN, IPIF_FREE, ILL_FREE, ILL_MOVE_OK };

/* Flags passed to ipsq_try_enter */
#define	CUR_OP 0		/* Current ioctl continuing again */
#define	NEW_OP 1		/* New ioctl starting afresh */

/*
 * phyint represents state that is common to both IPv4 and IPv6 interfaces.
 * There is a separate ill_t representing IPv4 and IPv6 which has a
 * backpointer to the phyint structure for acessing common state.
 *
 * NOTE : It just stores the group name as there is only one name for
 *	  IPv4 and IPv6 i.e it is a underlying link property. Actually
 *        IPv4 and IPv6 ill are grouped together when their phyints have
 *        the same name.
 */
typedef struct phyint {
	struct ill_s	*phyint_illv4;
	struct ill_s	*phyint_illv6;
	uint_t		phyint_ifindex;		/* SIOCLSLIFINDEX */
	uint_t		phyint_notify_delay;	/* SIOCSLIFNOTIFYDELAY */
	char		*phyint_groupname;	/* SIOCSLIFGROUPNAME */
	uint_t		phyint_groupname_len;
	uint64_t	phyint_flags;
	avl_node_t	phyint_avl_by_index;	/* avl tree by index */
	avl_node_t	phyint_avl_by_name;	/* avl tree by name */
	kmutex_t	phyint_lock;
	struct ipsq_s	*phyint_ipsq;		/* back pointer to ipsq */
	struct phyint	*phyint_ipsq_next;	/* phyint list on this ipsq */
} phyint_t;

#define	CACHE_ALIGN_SIZE 64

#define	CACHE_ALIGN(align_struct)	P2ROUNDUP(sizeof (struct align_struct),\
							CACHE_ALIGN_SIZE)
struct _phyint_list_s_ {
	avl_tree_t	phyint_list_avl_by_index;	/* avl tree by index */
	avl_tree_t	phyint_list_avl_by_name;	/* avl tree by name */
};

typedef union phyint_list_u {
	struct	_phyint_list_s_ phyint_list_s;
	char	phyint_list_filler[CACHE_ALIGN(_phyint_list_s_)];
} phyint_list_t;

#define	phyint_list_avl_by_index	phyint_list_s.phyint_list_avl_by_index
#define	phyint_list_avl_by_name		phyint_list_s.phyint_list_avl_by_name
/*
 * ILL groups. We group ills,
 *
 * - if the ills have the same group name. (New way)
 *
 * ill_group locking notes:
 *
 * illgrp_lock protects ill_grp_ill_schednext.
 *
 * ill_g_lock protects ill_grp_next, illgrp_ill, illgrp_ill_count.
 * Holding ill_g_lock freezes the memberships of ills in IPMP groups.
 * It also freezes the global list of ills and all ipifs in all ills.
 *
 * To remove an ipif from the linked list of ipifs of that ill ipif_free_tail
 * holds both ill_g_lock, and ill_lock. Similarly to remove an ill from the
 * global list of ills, ill_delete_glist holds ill_g_lock as writer.
 * This simplifies things for ipif_select_source, illgrp_scheduler etc.
 * that need to walk the members of an illgrp. They just hold ill_g_lock
 * as reader to do the walk.
 *
 */
typedef	struct ill_group {
	kmutex_t	illgrp_lock;
	struct ill_group *illgrp_next;		/* Next ill_group */
	struct ill_s	*illgrp_ill_schednext;	/* Next ill to be scheduled */
	struct ill_s	*illgrp_ill;		/* First ill in the group */
	int		illgrp_ill_count;
} ill_group_t;

/*
 * Fragmentation hash bucket
 */
typedef struct ipfb_s {
	struct ipf_s	*ipfb_ipf;	/* List of ... */
	size_t		ipfb_count;	/* Count of bytes used by frag(s) */
	kmutex_t	ipfb_lock;	/* Protect all ipf in list */
	uint_t		ipfb_frag_pkts; /* num of distinct fragmented pkts */
} ipfb_t;

/*
 * IRE bucket structure. Usually there is an array of such structures,
 * each pointing to a linked list of ires. irb_refcnt counts the number
 * of walkers of a given hash bucket. Usually the reference count is
 * bumped up if the walker wants no IRES to be DELETED while walking the
 * list. Bumping up does not PREVENT ADDITION. This allows walking a given
 * hash bucket without stumbling up on a free pointer.
 *
 * irb_t structures in ip_ftable are dynamically allocated and freed.
 * In order to identify the irb_t structures that can be safely kmem_free'd
 * we need to ensure that
 *  - the irb_refcnt is quiescent, indicating no other walkers,
 *  - no other threads or ire's are holding references to the irb,
 *	i.e., irb_nire == 0,
 *  - there are no active ire's in the bucket, i.e., irb_ire_cnt == 0
 */
typedef struct irb {
	struct ire_s	*irb_ire;	/* First ire in this bucket */
					/* Should be first in this struct */
	krwlock_t	irb_lock;	/* Protect this bucket */
	uint_t		irb_refcnt;	/* Protected by irb_lock */
	uchar_t		irb_marks;	/* CONDEMNED ires in this bucket ? */
#define	IRB_MARK_CONDEMNED	0x0001
#define	IRB_MARK_FTABLE		0x0002
	uint_t		irb_ire_cnt;	/* Num of active IRE in this bucket */
	uint_t		irb_tmp_ire_cnt; /* Num of temporary IRE */
	struct ire_s	*irb_rr_origin;	/* origin for round-robin */
	int		irb_nire;	/* Num of ftable ire's that ref irb */
	ip_stack_t	*irb_ipst;	/* Does not have a netstack_hold */
} irb_t;

#define	IRB2RT(irb)	(rt_t *)((caddr_t)(irb) - offsetof(rt_t, rt_irb))

/* The following are return values of ip_xmit_v4() */
typedef enum {
	SEND_PASSED = 0,	 /* sent packet out on wire */
	SEND_FAILED,	 /* sending of packet failed */
	LOOKUP_IN_PROGRESS, /* ire cache found, ARP resolution in progress */
	LLHDR_RESLV_FAILED  /* macaddr resl of onlink dst or nexthop failed */
} ipxmit_state_t;

#define	IP_V4_G_HEAD	0
#define	IP_V6_G_HEAD	1

#define	MAX_G_HEADS	2

/*
 * unpadded ill_if structure
 */
struct 	_ill_if_s_ {
	union ill_if_u	*illif_next;
	union ill_if_u	*illif_prev;
	avl_tree_t	illif_avl_by_ppa;	/* AVL tree sorted on ppa */
	vmem_t		*illif_ppa_arena;	/* ppa index space */
	uint16_t	illif_mcast_v1;		/* hints for		  */
	uint16_t	illif_mcast_v2;		/* [igmp|mld]_slowtimo	  */
	int		illif_name_len;		/* name length */
	char		illif_name[LIFNAMSIZ];	/* name of interface type */
};

/* cache aligned ill_if structure */
typedef union 	ill_if_u {
	struct  _ill_if_s_ ill_if_s;
	char 	illif_filler[CACHE_ALIGN(_ill_if_s_)];
} ill_if_t;

#define	illif_next		ill_if_s.illif_next
#define	illif_prev		ill_if_s.illif_prev
#define	illif_avl_by_ppa	ill_if_s.illif_avl_by_ppa
#define	illif_ppa_arena		ill_if_s.illif_ppa_arena
#define	illif_mcast_v1		ill_if_s.illif_mcast_v1
#define	illif_mcast_v2		ill_if_s.illif_mcast_v2
#define	illif_name		ill_if_s.illif_name
#define	illif_name_len		ill_if_s.illif_name_len

typedef struct ill_walk_context_s {
	int	ctx_current_list; /* current list being searched */
	int	ctx_last_list;	 /* last list to search */
} ill_walk_context_t;

/*
 * ill_g_heads structure, one for IPV4 and one for IPV6
 */
struct _ill_g_head_s_ {
	ill_if_t	*ill_g_list_head;
	ill_if_t	*ill_g_list_tail;
};

typedef union ill_g_head_u {
	struct _ill_g_head_s_ ill_g_head_s;
	char	ill_g_head_filler[CACHE_ALIGN(_ill_g_head_s_)];
} ill_g_head_t;

#define	ill_g_list_head	ill_g_head_s.ill_g_list_head
#define	ill_g_list_tail	ill_g_head_s.ill_g_list_tail

#define	IP_V4_ILL_G_LIST(ipst)	\
	(ipst)->ips_ill_g_heads[IP_V4_G_HEAD].ill_g_list_head
#define	IP_V6_ILL_G_LIST(ipst)	\
	(ipst)->ips_ill_g_heads[IP_V6_G_HEAD].ill_g_list_head
#define	IP_VX_ILL_G_LIST(i, ipst)	\
	(ipst)->ips_ill_g_heads[i].ill_g_list_head

#define	ILL_START_WALK_V4(ctx_ptr, ipst)	\
	ill_first(IP_V4_G_HEAD, IP_V4_G_HEAD, ctx_ptr, ipst)
#define	ILL_START_WALK_V6(ctx_ptr, ipst)	\
	ill_first(IP_V6_G_HEAD, IP_V6_G_HEAD, ctx_ptr, ipst)
#define	ILL_START_WALK_ALL(ctx_ptr, ipst)	\
	ill_first(MAX_G_HEADS, MAX_G_HEADS, ctx_ptr, ipst)

/*
 * Capabilities, possible flags for ill_capabilities.
 */

#define	ILL_CAPAB_AH		0x01		/* IPsec AH acceleration */
#define	ILL_CAPAB_ESP		0x02		/* IPsec ESP acceleration */
#define	ILL_CAPAB_MDT		0x04		/* Multidata Transmit */
#define	ILL_CAPAB_HCKSUM	0x08		/* Hardware checksumming */
#define	ILL_CAPAB_ZEROCOPY	0x10		/* Zero-copy */
#define	ILL_CAPAB_POLL		0x20		/* Polling Toggle */
#define	ILL_CAPAB_SOFT_RING	0x40		/* Soft_Ring capability */
#define	ILL_CAPAB_LSO		0x80		/* Large Segment Offload */

/*
 * Per-ill Multidata Transmit capabilities.
 */
typedef struct ill_mdt_capab_s ill_mdt_capab_t;

/*
 * Per-ill IPsec capabilities.
 */
typedef struct ill_ipsec_capab_s ill_ipsec_capab_t;

/*
 * Per-ill Hardware Checksumming capbilities.
 */
typedef struct ill_hcksum_capab_s ill_hcksum_capab_t;

/*
 * Per-ill Zero-copy capabilities.
 */
typedef struct ill_zerocopy_capab_s ill_zerocopy_capab_t;

/*
 * Per-ill Polling/soft ring capbilities.
 */
typedef struct ill_dls_capab_s ill_dls_capab_t;

/*
 * Per-ill polling resource map.
 */
typedef struct ill_rx_ring ill_rx_ring_t;

/*
 * Per-ill Large Segment Offload capabilities.
 */
typedef struct ill_lso_capab_s ill_lso_capab_t;

/* The following are ill_state_flags */
#define	ILL_LL_SUBNET_PENDING	0x01	/* Waiting for DL_INFO_ACK from drv */
#define	ILL_CONDEMNED		0x02	/* No more new ref's to the ILL */
#define	ILL_CHANGING		0x04	/* ILL not globally visible */
#define	ILL_DL_UNBIND_IN_PROGRESS	0x08	/* UNBIND_REQ is sent */
#define	ILL_SOFT_RING_ASSIGN	0x10	/* Makeing soft ring assigment */

/* Is this an ILL whose source address is used by other ILL's ? */
#define	IS_USESRC_ILL(ill)			\
	(((ill)->ill_usesrc_ifindex == 0) &&	\
	((ill)->ill_usesrc_grp_next != NULL))

/* Is this a client/consumer of the usesrc ILL ? */
#define	IS_USESRC_CLI_ILL(ill)			\
	(((ill)->ill_usesrc_ifindex != 0) &&	\
	((ill)->ill_usesrc_grp_next != NULL))

/* Is this an virtual network interface (vni) ILL ? */
#define	IS_VNI(ill)							     \
	(((ill) != NULL) &&						     \
	(((ill)->ill_phyint->phyint_flags & (PHYI_LOOPBACK|PHYI_VIRTUAL)) == \
	PHYI_VIRTUAL))

/*
 * IP Lower level Structure.
 * Instance data structure in ip_open when there is a device below us.
 */
typedef struct ill_s {
	ill_if_t *ill_ifptr;		/* pointer to interface type */
	queue_t	*ill_rq;		/* Read queue. */
	queue_t	*ill_wq;		/* Write queue. */

	int	ill_error;		/* Error value sent up by device. */

	ipif_t	*ill_ipif;		/* Interface chain for this ILL. */

	uint_t	ill_ipif_up_count;	/* Number of IPIFs currently up. */
	uint_t	ill_max_frag;		/* Max IDU from DLPI. */
	char	*ill_name;		/* Our name. */
	uint_t	ill_ipif_dup_count;	/* Number of duplicate addresses. */
	uint_t	ill_name_length;	/* Name length, incl. terminator. */
	char	*ill_ndd_name;		/* Name + ":ip?_forwarding" for NDD. */
	uint_t	ill_net_type;		/* IRE_IF_RESOLVER/IRE_IF_NORESOLVER. */
	/*
	 * Physical Point of Attachment num.  If DLPI style 1 provider
	 * then this is derived from the devname.
	 */
	uint_t	ill_ppa;
	t_uscalar_t	ill_sap;
	t_scalar_t	ill_sap_length;	/* Including sign (for position) */
	uint_t	ill_phys_addr_length;	/* Excluding the sap. */
	uint_t	ill_bcast_addr_length;	/* Only set when the DL provider */
					/* supports broadcast. */
	t_uscalar_t	ill_mactype;
	uint8_t	*ill_frag_ptr;		/* Reassembly state. */
	timeout_id_t ill_frag_timer_id; /* timeout id for the frag timer */
	ipfb_t	*ill_frag_hash_tbl;	/* Fragment hash list head. */
	ipif_t	*ill_pending_ipif;	/* IPIF waiting for DL operation. */

	ilm_t	*ill_ilm;		/* Multicast mebership for lower ill */
	uint_t	ill_global_timer;	/* for IGMPv3/MLDv2 general queries */
	int	ill_mcast_type;		/* type of router which is querier */
					/* on this interface */
	uint16_t ill_mcast_v1_time;	/* # slow timeouts since last v1 qry */
	uint16_t ill_mcast_v2_time;	/* # slow timeouts since last v2 qry */
	uint8_t	ill_mcast_v1_tset;	/* 1 => timer is set; 0 => not set */
	uint8_t	ill_mcast_v2_tset;	/* 1 => timer is set; 0 => not set */

	uint8_t	ill_mcast_rv;		/* IGMPv3/MLDv2 robustness variable */
	int	ill_mcast_qi;		/* IGMPv3/MLDv2 query interval var */

	mblk_t	*ill_pending_mp;	/* IOCTL/DLPI awaiting completion. */
	/*
	 * All non-NULL cells between 'ill_first_mp_to_free' and
	 * 'ill_last_mp_to_free' are freed in ill_delete.
	 */
#define	ill_first_mp_to_free	ill_bcast_mp
	mblk_t	*ill_bcast_mp;		/* DLPI header for broadcasts. */
	mblk_t	*ill_resolver_mp;	/* Resolver template. */
	mblk_t	*ill_detach_mp;		/* detach mp, or NULL if style1 */
	mblk_t	*ill_unbind_mp;		/* unbind mp from ill_dl_up() */
	mblk_t	*ill_dlpi_deferred;	/* b_next chain of control messages */
	mblk_t	*ill_phys_addr_mp;	/* mblk which holds ill_phys_addr */
#define	ill_last_mp_to_free	ill_phys_addr_mp

	cred_t	*ill_credp;		/* opener's credentials */
	uint8_t	*ill_phys_addr;		/* ill_phys_addr_mp->b_rptr + off */

	uint_t	ill_state_flags;	/* see ILL_* flags above */

	/* Following bit fields protected by ipsq_t */
	uint_t
		ill_needs_attach : 1,
		ill_reserved : 1,
		ill_isv6 : 1,
		ill_dlpi_style_set : 1,

		ill_ifname_pending : 1,
		ill_move_in_progress : 1, /* FAILOVER/FAILBACK in progress */
		ill_join_allmulti : 1,
		ill_logical_down : 1,

		ill_is_6to4tun : 1,	/* Interface is a 6to4 tunnel */
		ill_promisc_on_phys : 1, /* phys interface in promisc mode */
		ill_dl_up : 1,
		ill_up_ipifs : 1,

		ill_note_link : 1,	/* supports link-up notification */

		ill_pad_to_bit_31 : 19;

	/* Following bit fields protected by ill_lock */
	uint_t
		ill_fragtimer_executing : 1,
		ill_fragtimer_needrestart : 1,
		ill_ilm_cleanup_reqd : 1,
		ill_arp_closing : 1,

		ill_arp_bringup_pending : 1,
		ill_mtu_userspecified : 1, /* SIOCSLNKINFO has set the mtu */
		ill_arp_extend : 1,	/* ARP has DAD extensions */
		ill_pad_bit_31 : 25;

	/*
	 * Used in SIOCSIFMUXID and SIOCGIFMUXID for 'ifconfig unplumb'.
	 */
	int	ill_arp_muxid;		/* muxid returned from plink for arp */
	int	ill_ip_muxid;		/* muxid returned from plink for ip */

	/*
	 * NIC event information attached, to be used by nic event hooks.
	 */
	hook_nic_event_t	*ill_nic_event_info;

	/*
	 * Used for IP frag reassembly throttling on a per ILL basis.
	 *
	 * Note: frag_count is approximate, its added to and subtracted from
	 *	 without any locking, so simultaneous load/modify/stores can
	 *	 collide, also ill_frag_purge() recalculates its value by
	 *	 summing all the ipfb_count's without locking out updates
	 *	 to the ipfb's.
	 */
	uint_t	ill_ipf_gen;		/* Generation of next fragment queue */
	uint_t	ill_frag_count;		/* Approx count of all mblk bytes */
	uint_t	ill_frag_free_num_pkts;	 /* num of fragmented packets to free */
	clock_t	ill_last_frag_clean_time; /* time when frag's were pruned */
	int	ill_type;		/* From <net/if_types.h> */
	uint_t	ill_dlpi_multicast_state;	/* See below IDS_* */
	uint_t	ill_dlpi_fastpath_state;	/* See below IDS_* */

	/*
	 * Capabilities related fields.
	 */
	uint_t  ill_dlpi_capab_state;	/* State of capability query, IDS_* */
	uint64_t ill_capabilities;	/* Enabled capabilities, ILL_CAPAB_* */
	ill_mdt_capab_t	*ill_mdt_capab;	/* Multidata Transmit capabilities */
	ill_ipsec_capab_t *ill_ipsec_capab_ah;	/* IPsec AH capabilities */
	ill_ipsec_capab_t *ill_ipsec_capab_esp;	/* IPsec ESP capabilities */
	ill_hcksum_capab_t *ill_hcksum_capab; /* H/W cksumming capabilities */
	ill_zerocopy_capab_t *ill_zerocopy_capab; /* Zero-copy capabilities */
	ill_dls_capab_t *ill_dls_capab; /* Polling, soft ring capabilities */
	ill_lso_capab_t *ill_lso_capab; /* Large Segment Offload capabilities */

	/*
	 * New fields for IPv6
	 */
	uint8_t	ill_max_hops;	/* Maximum hops for any logical interface */
	uint_t	ill_max_mtu;	/* Maximum MTU for any logical interface */
	uint32_t ill_reachable_time;	/* Value for ND algorithm in msec */
	uint32_t ill_reachable_retrans_time; /* Value for ND algorithm msec */
	uint_t	ill_max_buf;		/* Max # of req to buffer for ND */
	in6_addr_t	ill_token;
	uint_t		ill_token_length;
	uint32_t	ill_xmit_count;		/* ndp max multicast xmits */
	mib2_ipIfStatsEntry_t	*ill_ip_mib;	/* ver indep. interface mib */
	mib2_ipv6IfIcmpEntry_t	*ill_icmp6_mib;	/* Per interface mib */
	/*
	 * Following two mblks are allocated common to all
	 * the ipifs when the first interface is coming up.
	 * It is sent up to arp when the last ipif is coming
	 * down.
	 */
	mblk_t			*ill_arp_down_mp;
	mblk_t			*ill_arp_del_mapping_mp;
	/*
	 * Used for implementing IFF_NOARP. As IFF_NOARP is used
	 * to turn off for all the logicals, it is here instead
	 * of the ipif.
	 */
	mblk_t			*ill_arp_on_mp;
	/* Peer ill of an IPMP move operation */
	struct ill_s		*ill_move_peer;

	phyint_t		*ill_phyint;
	uint64_t		ill_flags;
	ill_group_t		*ill_group;
	struct ill_s		*ill_group_next;
	/*
	 * Reverse tunnel related count. This count
	 * determines how many mobile nodes are using this
	 * ill to send packet to reverse tunnel via foreign
	 * agent. A non-zero count specifies presence of
	 * mobile node(s) using reverse tunnel through this
	 * interface.
	 */
	uint32_t		ill_mrtun_refcnt;

	/*
	 * This count is bumped up when a route is added with
	 * RTA_SRCIFP bit flag using routing socket.
	 */
	uint32_t		ill_srcif_refcnt;
	/*
	 * Pointer to the special interface based routing table.
	 * This routing table is created dynamically when RTA_SRCIFP
	 * is set by the routing socket.
	 */
	irb_t			*ill_srcif_table;
	kmutex_t	ill_lock;	/* Please see table below */
	/*
	 * The ill_nd_lla* fields handle the link layer address option
	 * from neighbor discovery. This is used for external IPv6
	 * address resolution.
	 */
	mblk_t		*ill_nd_lla_mp;	/* mblk which holds ill_nd_lla */
	uint8_t		*ill_nd_lla;	/* Link Layer Address */
	uint_t		ill_nd_lla_len;	/* Link Layer Address length */
	/*
	 * We now have 3 phys_addr_req's sent down. This field keeps track
	 * of which one is pending.
	 */
	t_uscalar_t	ill_phys_addr_pend; /* which dl_phys_addr_req pending */
	/*
	 * Used to save errors that occur during plumbing
	 */
	uint_t		ill_ifname_pending_err;
	avl_node_t	ill_avl_byppa; /* avl node based on ppa */
	void		*ill_fastpath_list; /* both ire and nce hang off this */
	uint_t		ill_refcnt;	/* active refcnt by threads */
	uint_t		ill_ire_cnt;	/* ires associated with this ill */
	kcondvar_t	ill_cv;
	uint_t		ill_ilm_walker_cnt;	/* snmp ilm walkers */
	uint_t		ill_nce_cnt;	/* nces associated with this ill */
	uint_t		ill_waiters;	/* threads waiting in ipsq_enter */
	/*
	 * Contains the upper read queue pointer of the module immediately
	 * beneath IP.  This field allows IP to validate sub-capability
	 * acknowledgments coming up from downstream.
	 */
	queue_t		*ill_lmod_rq;	/* read queue pointer of module below */
	uint_t		ill_lmod_cnt;	/* number of modules beneath IP */
	ip_m_t		*ill_media;	/* media specific params/functions */
	t_uscalar_t	ill_dlpi_pending; /* Last DLPI primitive issued */
	uint_t		ill_usesrc_ifindex; /* use src addr from this ILL */
	struct ill_s	*ill_usesrc_grp_next; /* Next ILL in the usesrc group */
#ifdef ILL_DEBUG
	th_trace_t	*ill_trace[IP_TR_HASH_MAX];
	boolean_t	ill_trace_disable;	/* True when alloc fails */
#endif
	zoneid_t	ill_zoneid;
	ip_stack_t	*ill_ipst;	/* Corresponds to a netstack_hold */
} ill_t;

extern	void	ill_delete_glist(ill_t *);

/*
 * The following table lists the protection levels of the various members
 * of the ill_t. Same notation as that used for ipif_t above is used.
 *
 *				Write			Read
 *
 * ill_ifptr			ill_g_lock + s		Write once
 * ill_rq			ipsq			Write once
 * ill_wq			ipsq			Write once
 *
 * ill_error			ipsq			None
 * ill_ipif			ill_g_lock + ipsq	ill_g_lock OR ipsq
 * ill_ipif_up_count		ill_lock + ipsq		ill_lock
 * ill_max_frag			ipsq			Write once
 *
 * ill_name			ill_g_lock + ipsq	Write once
 * ill_name_length		ill_g_lock + ipsq	Write once
 * ill_ndd_name			ipsq			Write once
 * ill_net_type			ipsq			Write once
 * ill_ppa			ill_g_lock + ipsq	Write once
 * ill_sap			ipsq + down ill		Write once
 * ill_sap_length		ipsq + down ill		Write once
 * ill_phys_addr_length		ipsq + down ill		Write once
 *
 * ill_bcast_addr_length	ipsq			ipsq
 * ill_mactype			ipsq			ipsq
 * ill_frag_ptr			ipsq			ipsq
 *
 * ill_frag_timer_id		ill_lock		ill_lock
 * ill_frag_hash_tbl		ipsq			up ill
 * ill_ilm			ipsq + ill_lock		ill_lock
 * ill_mcast_type		ill_lock		ill_lock
 * ill_mcast_v1_time		ill_lock		ill_lock
 * ill_mcast_v2_time		ill_lock		ill_lock
 * ill_mcast_v1_tset		ill_lock		ill_lock
 * ill_mcast_v2_tset		ill_lock		ill_lock
 * ill_mcast_rv			ill_lock		ill_lock
 * ill_mcast_qi			ill_lock		ill_lock
 * ill_pending_mp		ill_lock		ill_lock
 *
 * ill_bcast_mp			ipsq			ipsq
 * ill_resolver_mp		ipsq			only when ill is up
 * ill_down_mp			ipsq			ipsq
 * ill_dlpi_deferred		ipsq			ipsq
 * ill_dlpi_pending		ipsq and ill_lock	ipsq or ill_lock
 * ill_phys_addr_mp		ipsq + down ill		only when ill is up
 * ill_phys_addr		ipsq + down ill		only when ill is up
 *
 * ill_state_flags		ill_lock		ill_lock
 * exclusive bit flags		ipsq_t			ipsq_t
 * shared bit flags		ill_lock		ill_lock
 *
 * ill_arp_muxid		ipsq			Not atomic
 * ill_ip_muxid			ipsq			Not atomic
 *
 * ill_ipf_gen			Not atomic
 * ill_frag_count		Approx. not protected
 * ill_type			ipsq + down ill		only when ill is up
 * ill_dlpi_multicast_state	ill_lock		ill_lock
 * ill_dlpi_fastpath_state	ill_lock		ill_lock
 * ill_max_hops			ipsq			Not atomic
 *
 * ill_max_mtu
 *
 * ill_reachable_time		ipsq + ill_lock		ill_lock
 * ill_reachable_retrans_time	ipsq + ill_lock		ill_lock
 * ill_max_buf			ipsq + ill_lock		ill_lock
 *
 * Next 2 fields need ill_lock because of the get ioctls. They should not
 * report partially updated results without executing in the ipsq.
 * ill_token			ipsq + ill_lock		ill_lock
 * ill_token_length		ipsq + ill_lock		ill_lock
 * ill_xmit_count		ipsq + down ill		write once
 * ill_ip6_mib			ipsq + down ill		only when ill is up
 * ill_icmp6_mib		ipsq + down ill		only when ill is up
 * ill_arp_down_mp		ipsq			ipsq
 * ill_arp_del_mapping_mp	ipsq			ipsq
 * ill_arp_on_mp		ipsq			ipsq
 * ill_move_peer		ipsq			ipsq
 *
 * ill_phyint			ipsq, ill_g_lock, ill_lock	Any of them
 * ill_flags			ill_lock		ill_lock
 * ill_group			ipsq, ill_g_lock, ill_lock	Any of them
 * ill_group_next		ipsq, ill_g_lock, ill_lock	Any of them
 * ill_mrtun_refcnt		ill_lock		ill_lock
 * ill_srcif_refcnt		ill_lock		ill_lock
 * ill_srcif_table		ill_lock		ill_lock
 * ill_nd_lla_mp		ipsq + down ill		only when ill is up
 * ill_nd_lla			ipsq + down ill		only when ill is up
 * ill_nd_lla_len		ipsq + down ill		only when ill is up
 * ill_phys_addr_pend		ipsq + down ill		only when ill is up
 * ill_ifname_pending_err	ipsq			ipsq
 * ill_avl_byppa		ipsq, ill_g_lock	write once
 *
 * ill_fastpath_list		ill_lock		ill_lock
 * ill_refcnt			ill_lock		ill_lock
 * ill_ire_cnt			ill_lock		ill_lock
 * ill_cv			ill_lock		ill_lock
 * ill_ilm_walker_cnt		ill_lock		ill_lock
 * ill_nce_cnt			ill_lock		ill_lock
 * ill_trace			ill_lock		ill_lock
 * ill_usesrc_grp_next		ill_g_usesrc_lock	ill_g_usesrc_lock
 */

/*
 * For ioctl restart mechanism see ip_reprocess_ioctl()
 */
struct ip_ioctl_cmd_s;

typedef	int (*ifunc_t)(ipif_t *, struct sockaddr_in *, queue_t *, mblk_t *,
    struct ip_ioctl_cmd_s *, void *);

typedef struct ip_ioctl_cmd_s {
	int	ipi_cmd;
	size_t	ipi_copyin_size;
	uint_t	ipi_flags;
	uint_t	ipi_cmd_type;
	ifunc_t	ipi_func;
	ifunc_t	ipi_func_restart;
} ip_ioctl_cmd_t;

/*
 * ipi_cmd_type:
 *
 * IF_CMD		1	old style ifreq cmd
 * LIF_CMD		2	new style lifreq cmd
 * MISC_CMD		3	Misc. (non [l]ifreq, tun) cmds
 * TUN_CMD		4	tunnel related
 */

enum { IF_CMD = 1, LIF_CMD, MISC_CMD, TUN_CMD };

#define	IPI_DONTCARE	0	/* For ioctl encoded values that don't matter */

/* Flag values in ipi_flags */
#define	IPI_PRIV	0x1		/* Root only command */
#define	IPI_MODOK	0x2		/* Permitted on mod instance of IP */
#define	IPI_WR		0x4		/* Need to grab writer access */
#define	IPI_GET_CMD	0x8		/* branch to mi_copyout on success */
#define	IPI_REPL	0x10	/* valid for replacement ipif created in MOVE */
#define	IPI_NULL_BCONT	0x20	/* ioctl has not data and hence no b_cont */
#define	IPI_PASS_DOWN	0x40	/* pass this ioctl down when a module only */

extern ip_ioctl_cmd_t	ip_ndx_ioctl_table[];
extern ip_ioctl_cmd_t	ip_misc_ioctl_table[];
extern int ip_ndx_ioctl_count;
extern int ip_misc_ioctl_count;

#define	ILL_CLEAR_MOVE(ill) {				\
	ill_t *peer_ill;				\
							\
	peer_ill = (ill)->ill_move_peer;		\
	ASSERT(peer_ill != NULL);			\
	(ill)->ill_move_in_progress = B_FALSE;		\
	peer_ill->ill_move_in_progress = B_FALSE;	\
	(ill)->ill_move_peer = NULL;			\
	peer_ill->ill_move_peer = NULL;			\
}

/* Passed down by ARP to IP during I_PLINK/I_PUNLINK */
typedef struct ipmx_s {
	char	ipmx_name[LIFNAMSIZ];		/* if name */
	uint_t
		ipmx_arpdev_stream : 1,		/* This is the arp stream */
		ipmx_notused : 31;
} ipmx_t;

/*
 * State for detecting if a driver supports certain features.
 * Support for DL_ENABMULTI_REQ uses ill_dlpi_multicast_state.
 * Support for DLPI M_DATA fastpath uses ill_dlpi_fastpath_state.
 * Support for DL_CAPABILITY_REQ uses ill_dlpi_capab_state.
 */
#define	IDS_UNKNOWN	0	/* No DLPI request sent */
#define	IDS_INPROGRESS	1	/* DLPI request sent */
#define	IDS_OK		2	/* DLPI request completed successfully */
#define	IDS_FAILED	3	/* DLPI request failed */
#define	IDS_RENEG	4	/* Driver asked for a renegotiation */

/* Named Dispatch Parameter Management Structure */
typedef struct ipparam_s {
	uint_t	ip_param_min;
	uint_t	ip_param_max;
	uint_t	ip_param_value;
	char	*ip_param_name;
} ipparam_t;

/* Extended NDP Management Structure */
typedef struct ipndp_s {
	ndgetf_t	ip_ndp_getf;
	ndsetf_t	ip_ndp_setf;
	caddr_t		ip_ndp_data;
	char		*ip_ndp_name;
} ipndp_t;

/*
 * The kernel stores security attributes of all gateways in a database made
 * up of one or more tsol_gcdb_t elements.  Each tsol_gcdb_t contains the
 * security-related credentials of the gateway.  More than one gateways may
 * share entries in the database.
 *
 * The tsol_gc_t structure represents the gateway to credential association,
 * and refers to an entry in the database.  One or more tsol_gc_t entities are
 * grouped together to form one or more tsol_gcgrp_t, each representing the
 * list of security attributes specific to the gateway.  A gateway may be
 * associated with at most one credentials group.
 */
struct tsol_gcgrp_s;

extern uchar_t	ip6opt_ls;	/* TX IPv6 enabler */

/*
 * Gateway security credential record.
 */
typedef struct tsol_gcdb_s {
	uint_t		gcdb_refcnt;	/* reference count */
	struct rtsa_s	gcdb_attr;	/* security attributes */
#define	gcdb_mask	gcdb_attr.rtsa_mask
#define	gcdb_doi	gcdb_attr.rtsa_doi
#define	gcdb_slrange	gcdb_attr.rtsa_slrange
} tsol_gcdb_t;

/*
 * Gateway to credential association.
 */
typedef struct tsol_gc_s {
	uint_t		gc_refcnt;	/* reference count */
	struct tsol_gcgrp_s *gc_grp;	/* pointer to group */
	struct tsol_gc_s *gc_prev;	/* previous in list */
	struct tsol_gc_s *gc_next;	/* next in list */
	tsol_gcdb_t	*gc_db;		/* pointer to actual credentials */
} tsol_gc_t;

/*
 * Gateway credentials group address.
 */
typedef struct tsol_gcgrp_addr_s {
	int		ga_af;		/* address family */
	in6_addr_t	ga_addr;	/* IPv4 mapped or IPv6 address */
} tsol_gcgrp_addr_t;

/*
 * Gateway credentials group.
 */
typedef struct tsol_gcgrp_s {
	uint_t		gcgrp_refcnt;	/* reference count */
	krwlock_t	gcgrp_rwlock;	/* lock to protect following */
	uint_t		gcgrp_count;	/* number of credentials */
	tsol_gc_t	*gcgrp_head;	/* first credential in list */
	tsol_gc_t	*gcgrp_tail;	/* last credential in list */
	tsol_gcgrp_addr_t gcgrp_addr;	/* next-hop gateway address */
} tsol_gcgrp_t;

extern kmutex_t gcgrp_lock;

#define	GC_REFRELE(p) {				\
	ASSERT((p)->gc_grp != NULL);		\
	rw_enter(&(p)->gc_grp->gcgrp_rwlock, RW_WRITER); \
	ASSERT((p)->gc_refcnt > 0);		\
	if (--((p)->gc_refcnt) == 0)		\
		gc_inactive(p);			\
	else					\
		rw_exit(&(p)->gc_grp->gcgrp_rwlock); \
}

#define	GCGRP_REFHOLD(p) {			\
	mutex_enter(&gcgrp_lock);		\
	++((p)->gcgrp_refcnt);			\
	ASSERT((p)->gcgrp_refcnt != 0);		\
	mutex_exit(&gcgrp_lock);		\
}

#define	GCGRP_REFRELE(p) {			\
	mutex_enter(&gcgrp_lock);		\
	ASSERT((p)->gcgrp_refcnt > 0);		\
	if (--((p)->gcgrp_refcnt) == 0)		\
		gcgrp_inactive(p);		\
	ASSERT(MUTEX_HELD(&gcgrp_lock));	\
	mutex_exit(&gcgrp_lock);		\
}

/*
 * IRE gateway security attributes structure, pointed to by tsol_ire_gw_secattr
 */
struct tsol_tnrhc;

typedef struct tsol_ire_gw_secattr_s {
	kmutex_t	igsa_lock;	/* lock to protect following */
	struct tsol_tnrhc *igsa_rhc;	/* host entry for gateway */
	tsol_gc_t	*igsa_gc;	/* for prefix IREs */
	tsol_gcgrp_t	*igsa_gcgrp;	/* for cache IREs */
} tsol_ire_gw_secattr_t;

/*
 * Following are the macros to increment/decrement the reference
 * count of the IREs and IRBs (ire bucket).
 *
 * 1) We bump up the reference count of an IRE to make sure that
 *    it does not get deleted and freed while we are using it.
 *    Typically all the lookup functions hold the bucket lock,
 *    and look for the IRE. If it finds an IRE, it bumps up the
 *    reference count before dropping the lock. Sometimes we *may* want
 *    to bump up the reference count after we *looked* up i.e without
 *    holding the bucket lock. So, the IRE_REFHOLD macro does not assert
 *    on the bucket lock being held. Any thread trying to delete from
 *    the hash bucket can still do so but cannot free the IRE if
 *    ire_refcnt is not 0.
 *
 * 2) We bump up the reference count on the bucket where the IRE resides
 *    (IRB), when we want to prevent the IREs getting deleted from a given
 *    hash bucket. This makes life easier for ire_walk type functions which
 *    wants to walk the IRE list, call a function, but needs to drop
 *    the bucket lock to prevent recursive rw_enters. While the
 *    lock is dropped, the list could be changed by other threads or
 *    the same thread could end up deleting the ire or the ire pointed by
 *    ire_next. IRE_REFHOLDing the ire or ire_next is not sufficient as
 *    a delete will still remove the ire from the bucket while we have
 *    dropped the lock and hence the ire_next would be NULL. Thus, we
 *    need a mechanism to prevent deletions from a given bucket.
 *
 *    To prevent deletions, we bump up the reference count on the
 *    bucket. If the bucket is held, ire_delete just marks IRE_MARK_CONDEMNED
 *    both on the ire's ire_marks and the bucket's irb_marks. When the
 *    reference count on the bucket drops to zero, all the CONDEMNED ires
 *    are deleted. We don't have to bump up the reference count on the
 *    bucket if we are walking the bucket and never have to drop the bucket
 *    lock. Note that IRB_REFHOLD does not prevent addition of new ires
 *    in the list. It is okay because addition of new ires will not cause
 *    ire_next to point to freed memory. We do IRB_REFHOLD only when
 *    all of the 3 conditions are true :
 *
 *    1) The code needs to walk the IRE bucket from start to end.
 *    2) It may have to drop the bucket lock sometimes while doing (1)
 *    3) It does not want any ires to be deleted meanwhile.
 */

/*
 * Bump up the reference count on the IRE. We cannot assert that the
 * bucket lock is being held as it is legal to bump up the reference
 * count after the first lookup has returned the IRE without
 * holding the lock. Currently ip_wput does this for caching IRE_CACHEs.
 */

#ifndef IRE_DEBUG

#define	IRE_REFHOLD_NOTR(ire)	IRE_REFHOLD(ire)
#define	IRE_UNTRACE_REF(ire)
#define	IRE_TRACE_REF(ire)

#else

#define	IRE_REFHOLD_NOTR(ire) {				\
	atomic_add_32(&(ire)->ire_refcnt, 1);		\
	ASSERT((ire)->ire_refcnt != 0);			\
}

#define	IRE_UNTRACE_REF(ire)	ire_untrace_ref(ire);
#define	IRE_TRACE_REF(ire)	ire_trace_ref(ire);
#endif

#define	IRE_REFHOLD(ire) {				\
	atomic_add_32(&(ire)->ire_refcnt, 1);		\
	ASSERT((ire)->ire_refcnt != 0);			\
	IRE_TRACE_REF(ire);				\
}

#define	IRE_REFHOLD_LOCKED(ire)	{			\
	IRE_TRACE_REF(ire);				\
	(ire)->ire_refcnt++;				\
}

/*
 * Decrement the reference count on the IRE.
 * In architectures e.g sun4u, where atomic_add_32_nv is just
 * a cas, we need to maintain the right memory barrier semantics
 * as that of mutex_exit i.e all the loads and stores should complete
 * before the cas is executed. membar_exit() does that here.
 *
 * NOTE : This macro is used only in places where we want performance.
 *	  To avoid bloating the code, we use the function "ire_refrele"
 *	  which essentially calls the macro.
 */
#ifndef IRE_DEBUG
#define	IRE_REFRELE(ire) {					\
	ASSERT((ire)->ire_refcnt != 0);				\
	membar_exit();						\
	if (atomic_add_32_nv(&(ire)->ire_refcnt, -1) == 0)	\
		ire_inactive(ire);				\
}
#define	IRE_REFRELE_NOTR(ire)	IRE_REFRELE(ire)
#else
#define	IRE_REFRELE(ire) {					\
	if (ire->ire_bucket != NULL)				\
		ire_untrace_ref(ire);				\
	ASSERT((ire)->ire_refcnt != 0);				\
	membar_exit();						\
	if (atomic_add_32_nv(&(ire)->ire_refcnt, -1) == 0)	\
		ire_inactive(ire);				\
}
#define	IRE_REFRELE_NOTR(ire) {				\
	ASSERT((ire)->ire_refcnt != 0);				\
	membar_exit();						\
	if (atomic_add_32_nv(&(ire)->ire_refcnt, -1) == 0)	\
		ire_inactive(ire);				\
}
#endif

/*
 * Bump up the reference count on the hash bucket - IRB to
 * prevent ires from being deleted in this bucket.
 */
#define	IRB_REFHOLD(irb) {				\
	rw_enter(&(irb)->irb_lock, RW_WRITER);		\
	(irb)->irb_refcnt++;				\
	ASSERT((irb)->irb_refcnt != 0);			\
	rw_exit(&(irb)->irb_lock);			\
}
#define	IRB_REFHOLD_LOCKED(irb) {			\
	ASSERT(RW_WRITE_HELD(&(irb)->irb_lock));	\
	(irb)->irb_refcnt++;				\
	ASSERT((irb)->irb_refcnt != 0);			\
}

void irb_refrele_ftable(irb_t *);
/*
 * Note: when IRB_MARK_FTABLE (i.e., IRE_CACHETABLE entry), the irb_t
 * is statically allocated, so that when the irb_refcnt goes to 0,
 * we simply clean up the ire list and continue.
 */
#define	IRB_REFRELE(irb) {				\
	if ((irb)->irb_marks & IRB_MARK_FTABLE) {	\
		irb_refrele_ftable((irb));		\
	} else {					\
		rw_enter(&(irb)->irb_lock, RW_WRITER);		\
		ASSERT((irb)->irb_refcnt != 0);			\
		if (--(irb)->irb_refcnt	== 0 &&			\
		    ((irb)->irb_marks & IRE_MARK_CONDEMNED)) {	\
			ire_t *ire_list;			\
								\
			ire_list = ire_unlink(irb);		\
			rw_exit(&(irb)->irb_lock);		\
			ASSERT(ire_list != NULL);		\
			ire_cleanup(ire_list);			\
		} else {					\
			rw_exit(&(irb)->irb_lock);		\
		}						\
	}							\
}

extern struct kmem_cache *rt_entry_cache;

/*
 * Lock the fast path mp for access, since the fp_mp can be deleted
 * due a DL_NOTE_FASTPATH_FLUSH in the case of IRE_BROADCAST and IRE_MIPRTUN
 */

#define	LOCK_IRE_FP_MP(ire) {				\
		if ((ire)->ire_type == IRE_BROADCAST ||	\
		    (ire)->ire_type == IRE_MIPRTUN)	\
			mutex_enter(&ire->ire_nce->nce_lock);	\
	}
#define	UNLOCK_IRE_FP_MP(ire) {				\
		if ((ire)->ire_type == IRE_BROADCAST ||	\
		    (ire)->ire_type == IRE_MIPRTUN)	\
			mutex_exit(&ire->ire_nce->nce_lock);	\
	}

typedef struct ire4 {
	ipaddr_t ire4_src_addr;		/* Source address to use. */
	ipaddr_t ire4_mask;		/* Mask for matching this IRE. */
	ipaddr_t ire4_addr;		/* Address this IRE represents. */
	ipaddr_t ire4_gateway_addr;	/* Gateway if IRE_CACHE/IRE_OFFSUBNET */
	ipaddr_t ire4_cmask;		/* Mask from parent prefix route */
} ire4_t;

typedef struct ire6 {
	in6_addr_t ire6_src_addr;	/* Source address to use. */
	in6_addr_t ire6_mask;		/* Mask for matching this IRE. */
	in6_addr_t ire6_addr;		/* Address this IRE represents. */
	in6_addr_t ire6_gateway_addr;	/* Gateway if IRE_CACHE/IRE_OFFSUBNET */
	in6_addr_t ire6_cmask;		/* Mask from parent prefix route */
} ire6_t;

typedef union ire_addr {
	ire6_t	ire6_u;
	ire4_t	ire4_u;
} ire_addr_u_t;

/* Internet Routing Entry */
typedef struct ire_s {
	struct	ire_s	*ire_next;	/* The hash chain must be first. */
	struct	ire_s	**ire_ptpn;	/* Pointer to previous next. */
	uint32_t	ire_refcnt;	/* Number of references */
	mblk_t		*ire_mp;	/* Non-null if allocated as mblk */
	queue_t		*ire_rfq;	/* recv from this queue */
	queue_t		*ire_stq;	/* send to this queue */
	union {
		uint_t	*max_fragp;	/* Used only during ire creation */
		uint_t	max_frag;	/* MTU (next hop or path). */
	} imf_u;
#define	ire_max_frag	imf_u.max_frag
#define	ire_max_fragp	imf_u.max_fragp
	uint32_t	ire_frag_flag;	/* IPH_DF or zero. */
	uint32_t	ire_ident;	/* Per IRE IP ident. */
	uint32_t	ire_tire_mark;	/* Used for reclaim of unused. */
	uchar_t		ire_ipversion;	/* IPv4/IPv6 version */
	uchar_t		ire_marks;	/* IRE_MARK_CONDEMNED etc. */
	ushort_t	ire_type;	/* Type of IRE */
	uint_t	ire_ib_pkt_count;	/* Inbound packets for ire_addr */
	uint_t	ire_ob_pkt_count;	/* Outbound packets to ire_addr */
	uint_t	ire_ll_hdr_length;	/* Non-zero if we do M_DATA prepends */
	time_t	ire_create_time;	/* Time (in secs) IRE was created. */
	uint32_t	ire_phandle;	/* Associate prefix IREs to cache */
	uint32_t	ire_ihandle;	/* Associate interface IREs to cache */
	ipif_t		*ire_ipif;	/* the interface that this ire uses */
	uint32_t	ire_flags;	/* flags related to route (RTF_*) */
	uint_t	ire_ipsec_overhead;	/* IPSEC overhead */
	/*
	 * Neighbor Cache Entry for IPv6; arp info for IPv4
	 */
	struct	nce_s	*ire_nce;
	uint_t		ire_masklen;	/* # bits in ire_mask{,_v6} */
	ire_addr_u_t	ire_u;		/* IPv4/IPv6 address info. */

	irb_t		*ire_bucket;	/* Hash bucket when ire_ptphn is set */
	iulp_t		ire_uinfo;	/* Upper layer protocol info. */
	/*
	 * Protects ire_uinfo, ire_max_frag, and ire_frag_flag.
	 */
	kmutex_t	ire_lock;
	uint_t		ire_ipif_seqid; /* ipif_seqid of ire_ipif */
	/*
	 * For regular routes in forwarding table and cache table the
	 * the following entries are NULL/zero. Only reverse tunnel
	 * table and interface based forwarding table use these fields.
	 * Routes added with RTA_SRCIFP and RTA_SRC respectively have
	 * non-zero values for the following fields.
	 */
	ill_t		*ire_in_ill;	/* Incoming ill interface */
	ipaddr_t	ire_in_src_addr;
					/* source ip-addr of incoming packet */
	clock_t		ire_last_used_time;	/* Last used time */
	tsol_ire_gw_secattr_t *ire_gw_secattr; /* gateway security attributes */
	zoneid_t	ire_zoneid;	/* for local address discrimination */
	/*
	 * ire's that are embedded inside mblk_t and sent to the external
	 * resolver use the ire_stq_ifindex to track the ifindex of the
	 * ire_stq, so that the ill (if it exists) can be correctly recovered
	 * for cleanup in the esbfree routine when arp failure occurs
	 */
	uint_t	ire_stq_ifindex;
	uint_t		ire_defense_count;	/* number of ARP conflicts */
	uint_t		ire_defense_time;	/* last time defended (secs) */
	ip_stack_t	*ire_ipst;	/* Does not have a netstack_hold */
#ifdef IRE_DEBUG
	th_trace_t	*ire_trace[IP_TR_HASH_MAX];
	boolean_t	ire_trace_disable;	/* True when alloc fails */
#endif
} ire_t;

/* IPv4 compatiblity macros */
#define	ire_src_addr		ire_u.ire4_u.ire4_src_addr
#define	ire_mask		ire_u.ire4_u.ire4_mask
#define	ire_addr		ire_u.ire4_u.ire4_addr
#define	ire_gateway_addr	ire_u.ire4_u.ire4_gateway_addr
#define	ire_cmask		ire_u.ire4_u.ire4_cmask

#define	ire_src_addr_v6		ire_u.ire6_u.ire6_src_addr
#define	ire_mask_v6		ire_u.ire6_u.ire6_mask
#define	ire_addr_v6		ire_u.ire6_u.ire6_addr
#define	ire_gateway_addr_v6	ire_u.ire6_u.ire6_gateway_addr
#define	ire_cmask_v6		ire_u.ire6_u.ire6_cmask

/* Convenient typedefs for sockaddrs */
typedef	struct sockaddr_in	sin_t;
typedef	struct sockaddr_in6	sin6_t;

/* Address structure used for internal bind with IP */
typedef struct ipa_conn_s {
	ipaddr_t	ac_laddr;
	ipaddr_t	ac_faddr;
	uint16_t	ac_fport;
	uint16_t	ac_lport;
} ipa_conn_t;

typedef struct ipa6_conn_s {
	in6_addr_t	ac6_laddr;
	in6_addr_t	ac6_faddr;
	uint16_t	ac6_fport;
	uint16_t	ac6_lport;
} ipa6_conn_t;

/*
 * Using ipa_conn_x_t or ipa6_conn_x_t allows us to modify the behavior of IP's
 * bind handler.
 */
typedef struct ipa_conn_extended_s {
	uint64_t	acx_flags;
	ipa_conn_t	acx_conn;
} ipa_conn_x_t;

typedef struct ipa6_conn_extended_s {
	uint64_t	ac6x_flags;
	ipa6_conn_t	ac6x_conn;
} ipa6_conn_x_t;

/* flag values for ipa_conn_x_t and ipa6_conn_x_t. */
#define	ACX_VERIFY_DST	0x1ULL	/* verify destination address is reachable */

/* Name/Value Descriptor. */
typedef struct nv_s {
	uint64_t nv_value;
	char	*nv_name;
} nv_t;

/* IP Forwarding Ticket */
typedef	struct ipftk_s {
	queue_t	*ipftk_queue;
	ipaddr_t ipftk_dst;
} ipftk_t;

typedef struct ipt_s {
	pfv_t	func;		/* Routine to call */
	uchar_t	*arg;		/* ire or nce passed in */
} ipt_t;

#define	ILL_FRAG_HASH(s, i) \
	((ntohl(s) ^ ((i) ^ ((i) >> 8))) % ILL_FRAG_HASH_TBL_COUNT)

/*
 * The MAX number of allowed fragmented packets per hash bucket
 * calculation is based on the most common mtu size of 1500. This limit
 * will work well for other mtu sizes as well.
 */
#define	COMMON_IP_MTU 1500
#define	MAX_FRAG_MIN 10
#define	MAX_FRAG_PKTS(ipst)	\
	MAX(MAX_FRAG_MIN, (2 * (ipst->ips_ip_reass_queue_bytes / \
	    (COMMON_IP_MTU * ILL_FRAG_HASH_TBL_COUNT))))

/*
 * Maximum dups allowed per packet.
 */
extern uint_t ip_max_frag_dups;

/*
 * Per-packet information for received packets and transmitted.
 * Used by the transport protocols when converting between the packet
 * and ancillary data and socket options.
 *
 * Note: This private data structure and related IPPF_* constant
 * definitions are exposed to enable compilation of some debugging tools
 * like lsof which use struct tcp_t in <inet/tcp.h>. This is intended to be
 * a temporary hack and long term alternate interfaces should be defined
 * to support the needs of such tools and private definitions moved to
 * private headers.
 */
struct ip6_pkt_s {
	uint_t		ipp_fields;		/* Which fields are valid */
	uint_t		ipp_sticky_ignored;	/* sticky fields to ignore */
	uint_t		ipp_ifindex;		/* pktinfo ifindex */
	in6_addr_t	ipp_addr;		/* pktinfo src/dst addr */
	uint_t		ipp_unicast_hops;	/* IPV6_UNICAST_HOPS */
	uint_t		ipp_multicast_hops;	/* IPV6_MULTICAST_HOPS */
	uint_t		ipp_hoplimit;		/* IPV6_HOPLIMIT */
	uint_t		ipp_hopoptslen;
	uint_t		ipp_rtdstoptslen;
	uint_t		ipp_rthdrlen;
	uint_t		ipp_dstoptslen;
	uint_t		ipp_pathmtulen;
	uint_t		ipp_fraghdrlen;
	ip6_hbh_t	*ipp_hopopts;
	ip6_dest_t	*ipp_rtdstopts;
	ip6_rthdr_t	*ipp_rthdr;
	ip6_dest_t	*ipp_dstopts;
	ip6_frag_t	*ipp_fraghdr;
	struct ip6_mtuinfo *ipp_pathmtu;
	in6_addr_t	ipp_nexthop;		/* Transmit only */
	uint8_t		ipp_tclass;
	int8_t		ipp_use_min_mtu;
};
typedef struct ip6_pkt_s ip6_pkt_t;

extern void ip6_pkt_free(ip6_pkt_t *);	/* free storage inside ip6_pkt_t */

/*
 * This struct is used by ULP_opt_set() functions to return value of IPv4
 * ancillary options. Currently this is only used by udp and icmp and only
 * IP_PKTINFO option is supported.
 */
typedef struct ip4_pkt_s {
	uint_t		ip4_ill_index;	/* interface index */
	ipaddr_t	ip4_addr;	/* source address */
} ip4_pkt_t;

/*
 * Used by ULP's to pass options info to ip_output
 * currently only IP_PKTINFO is supported.
 */
typedef struct ip_opt_info_s {
	uint_t ip_opt_ill_index;
	uint_t ip_opt_flags;
} ip_opt_info_t;

/*
 * value for ip_opt_flags
 */
#define	IP_VERIFY_SRC	0x1

/*
 * This structure is used to convey information from IP and the ULP.
 * Currently used for the IP_RECVSLLA, IP_RECVIF and IP_RECVPKTINFO options.
 * The type of information field is set to IN_PKTINFO (i.e inbound pkt info)
 */
typedef struct ip_pktinfo {
	uint32_t		ip_pkt_ulp_type;	/* type of info sent */
	uint32_t		ip_pkt_flags;	/* what is sent up by IP */
	uint32_t		ip_pkt_ifindex;	/* inbound interface index */
	struct sockaddr_dl	ip_pkt_slla;	/* has source link layer addr */
	struct in_addr		ip_pkt_match_addr; /* matched address */
} ip_pktinfo_t;

/*
 * flags to tell UDP what IP is sending; in_pkt_flags
 */
#define	IPF_RECVIF	0x01	/* inbound interface index */
#define	IPF_RECVSLLA	0x02	/* source link layer address */
/*
 * Inbound interface index + matched address.
 * Used only by IPV4.
 */
#define	IPF_RECVADDR	0x04

/* ipp_fields values */
#define	IPPF_IFINDEX	0x0001	/* Part of in6_pktinfo: ifindex */
#define	IPPF_ADDR	0x0002	/* Part of in6_pktinfo: src/dst addr */
#define	IPPF_SCOPE_ID	0x0004	/* Add xmit ip6i_t for sin6_scope_id */
#define	IPPF_NO_CKSUM	0x0008	/* Add xmit ip6i_t for IP6I_NO_*_CKSUM */

#define	IPPF_RAW_CKSUM	0x0010	/* Add xmit ip6i_t for IP6I_RAW_CHECKSUM */
#define	IPPF_HOPLIMIT	0x0020
#define	IPPF_HOPOPTS	0x0040
#define	IPPF_RTHDR	0x0080

#define	IPPF_RTDSTOPTS	0x0100
#define	IPPF_DSTOPTS	0x0200
#define	IPPF_NEXTHOP	0x0400
#define	IPPF_PATHMTU	0x0800

#define	IPPF_TCLASS	0x1000
#define	IPPF_DONTFRAG	0x2000
#define	IPPF_USE_MIN_MTU	0x04000
#define	IPPF_MULTICAST_HOPS	0x08000

#define	IPPF_UNICAST_HOPS	0x10000
#define	IPPF_FRAGHDR		0x20000

#define	IPPF_HAS_IP6I \
	(IPPF_IFINDEX|IPPF_ADDR|IPPF_NEXTHOP|IPPF_SCOPE_ID| \
	IPPF_NO_CKSUM|IPPF_RAW_CKSUM|IPPF_HOPLIMIT|IPPF_DONTFRAG| \
	IPPF_USE_MIN_MTU|IPPF_MULTICAST_HOPS|IPPF_UNICAST_HOPS)

#define	TCP_PORTS_OFFSET	0
#define	UDP_PORTS_OFFSET	0

/*
 * lookups return the ill/ipif only if the flags are clear OR Iam writer.
 * ill / ipif lookup functions increment the refcnt on the ill / ipif only
 * after calling these macros. This ensures that the refcnt on the ipif or
 * ill will eventually drop down to zero.
 */
#define	ILL_LOOKUP_FAILED	1	/* Used as error code */
#define	IPIF_LOOKUP_FAILED	2	/* Used as error code */

#define	ILL_CAN_LOOKUP(ill) 						\
	(!((ill)->ill_state_flags & (ILL_CONDEMNED | ILL_CHANGING)) ||	\
	IAM_WRITER_ILL(ill))

#define	ILL_CAN_WAIT(ill, q)	\
	(((q) != NULL) && !((ill)->ill_state_flags & (ILL_CONDEMNED)))

#define	ILL_CAN_LOOKUP_WALKER(ill)	\
	(!((ill)->ill_state_flags & ILL_CONDEMNED))

#define	IPIF_CAN_LOOKUP(ipif)						\
	(!((ipif)->ipif_state_flags & (IPIF_CONDEMNED | IPIF_CHANGING)) || \
	IAM_WRITER_IPIF(ipif))

/*
 * If the parameter 'q' is NULL, the caller is not interested in wait and
 * restart of the operation if the ILL or IPIF cannot be looked up when it is
 * marked as 'CHANGING'. Typically a thread that tries to send out data  will
 * end up passing NULLs as the last 4 parameters to ill_lookup_on_ifindex and
 * in this case 'q' is NULL
 */
#define	IPIF_CAN_WAIT(ipif, q)	\
	(((q) != NULL) && !((ipif)->ipif_state_flags & (IPIF_CONDEMNED)))

#define	IPIF_CAN_LOOKUP_WALKER(ipif)					\
	(!((ipif)->ipif_state_flags & (IPIF_CONDEMNED)) ||		\
	IAM_WRITER_IPIF(ipif))

/*
 * These macros are used by critical set ioctls and failover ioctls to
 * mark the ipif appropriately before starting the operation and to clear the
 * marks after completing the operation.
 */
#define	IPIF_UNMARK_MOVING(ipif)                                \
	(ipif)->ipif_state_flags &= ~IPIF_MOVING & ~IPIF_CHANGING;

#define	ILL_UNMARK_CHANGING(ill)                                \
	(ill)->ill_state_flags &= ~ILL_CHANGING;

/* Macros used to assert that this thread is a writer  */
#define	IAM_WRITER_IPSQ(ipsq)	((ipsq)->ipsq_writer == curthread)
#define	IAM_WRITER_ILL(ill)					\
	((ill)->ill_phyint->phyint_ipsq->ipsq_writer == curthread)
#define	IAM_WRITER_IPIF(ipif)					\
	((ipif)->ipif_ill->ill_phyint->phyint_ipsq->ipsq_writer == curthread)

/*
 * Grab ill locks in the proper order. The order is highest addressed
 * ill is locked first.
 */
#define	GRAB_ILL_LOCKS(ill_1, ill_2)				\
{								\
	if ((ill_1) > (ill_2)) {				\
		if (ill_1 != NULL)				\
			mutex_enter(&(ill_1)->ill_lock);	\
		if (ill_2 != NULL)				\
			mutex_enter(&(ill_2)->ill_lock);	\
	} else {						\
		if (ill_2 != NULL)				\
			mutex_enter(&(ill_2)->ill_lock);	\
		if (ill_1 != NULL && ill_1 != ill_2)		\
			mutex_enter(&(ill_1)->ill_lock);	\
	}							\
}

#define	RELEASE_ILL_LOCKS(ill_1, ill_2)		\
{						\
	if (ill_1 != NULL)			\
		mutex_exit(&(ill_1)->ill_lock);	\
	if (ill_2 != NULL && ill_2 != ill_1)	\
		mutex_exit(&(ill_2)->ill_lock);	\
}

/* Get the other protocol instance ill */
#define	ILL_OTHER(ill)						\
	((ill)->ill_isv6 ? (ill)->ill_phyint->phyint_illv4 :	\
	    (ill)->ill_phyint->phyint_illv6)

#define	MATCH_V4_ONLY	0x1
#define	MATCH_V6_ONLY	0x2
#define	MATCH_ILL_ONLY	0x4

/* ioctl command info: Ioctl properties extracted and stored in here */
typedef struct cmd_info_s
{
	char    ci_groupname[LIFNAMSIZ + 1];	/* SIOCSLIFGROUPNAME */
	ipif_t  *ci_ipif;	/* ipif associated with [l]ifreq ioctl's */
	sin_t	*ci_sin;	/* the sin struct passed down */
	sin6_t	*ci_sin6;	/* the sin6_t struct passed down */
	struct lifreq *ci_lifr;	/* the lifreq struct passed down */
} cmd_info_t;

/*
 * List of AH and ESP IPsec acceleration capable ills
 */
typedef struct ipsec_capab_ill_s {
	uint_t ill_index;
	boolean_t ill_isv6;
	struct ipsec_capab_ill_s *next;
} ipsec_capab_ill_t;

extern struct kmem_cache *ire_cache;

extern ipaddr_t	ip_g_all_ones;

extern	uint_t	ip_loopback_mtu;	/* /etc/system */

extern vmem_t *ip_minor_arena;

/*
 * ip_g_forward controls IP forwarding.  It takes two values:
 *	0: IP_FORWARD_NEVER	Don't forward packets ever.
 *	1: IP_FORWARD_ALWAYS	Forward packets for elsewhere.
 *
 * RFC1122 says there must be a configuration switch to control forwarding,
 * but that the default MUST be to not forward packets ever.  Implicit
 * control based on configuration of multiple interfaces MUST NOT be
 * implemented (Section 3.1).  SunOS 4.1 did provide the "automatic" capability
 * and, in fact, it was the default.  That capability is now provided in the
 * /etc/rc2.d/S69inet script.
 */

#define	ips_ip_respond_to_address_mask_broadcast ips_param_arr[0].ip_param_value
#define	ips_ip_g_resp_to_echo_bcast	ips_param_arr[1].ip_param_value
#define	ips_ip_g_resp_to_echo_mcast	ips_param_arr[2].ip_param_value
#define	ips_ip_g_resp_to_timestamp	ips_param_arr[3].ip_param_value
#define	ips_ip_g_resp_to_timestamp_bcast ips_param_arr[4].ip_param_value
#define	ips_ip_g_send_redirects		ips_param_arr[5].ip_param_value
#define	ips_ip_g_forward_directed_bcast	ips_param_arr[6].ip_param_value
#define	ips_ip_debug			ips_param_arr[7].ip_param_value
#define	ips_ip_mrtdebug			ips_param_arr[8].ip_param_value
#define	ips_ip_timer_interval		ips_param_arr[9].ip_param_value
#define	ips_ip_ire_arp_interval		ips_param_arr[10].ip_param_value
#define	ips_ip_ire_redir_interval	ips_param_arr[11].ip_param_value
#define	ips_ip_def_ttl			ips_param_arr[12].ip_param_value
#define	ips_ip_forward_src_routed	ips_param_arr[13].ip_param_value
#define	ips_ip_wroff_extra		ips_param_arr[14].ip_param_value
#define	ips_ip_ire_pathmtu_interval	ips_param_arr[15].ip_param_value
#define	ips_ip_icmp_return		ips_param_arr[16].ip_param_value
#define	ips_ip_path_mtu_discovery	ips_param_arr[17].ip_param_value
#define	ips_ip_ignore_delete_time	ips_param_arr[18].ip_param_value
#define	ips_ip_ignore_redirect		ips_param_arr[19].ip_param_value
#define	ips_ip_output_queue		ips_param_arr[20].ip_param_value
#define	ips_ip_broadcast_ttl		ips_param_arr[21].ip_param_value
#define	ips_ip_icmp_err_interval	ips_param_arr[22].ip_param_value
#define	ips_ip_icmp_err_burst		ips_param_arr[23].ip_param_value
#define	ips_ip_reass_queue_bytes	ips_param_arr[24].ip_param_value
#define	ips_ip_strict_dst_multihoming	ips_param_arr[25].ip_param_value
#define	ips_ip_addrs_per_if		ips_param_arr[26].ip_param_value
#define	ips_ipsec_override_persocket_policy ips_param_arr[27].ip_param_value
#define	ips_icmp_accept_clear_messages	ips_param_arr[28].ip_param_value
#define	ips_igmp_accept_clear_messages	ips_param_arr[29].ip_param_value

/* IPv6 configuration knobs */
#define	ips_delay_first_probe_time	ips_param_arr[30].ip_param_value
#define	ips_max_unicast_solicit		ips_param_arr[31].ip_param_value
#define	ips_ipv6_def_hops		ips_param_arr[32].ip_param_value
#define	ips_ipv6_icmp_return		ips_param_arr[33].ip_param_value
#define	ips_ipv6_forward_src_routed	ips_param_arr[34].ip_param_value
#define	ips_ipv6_resp_echo_mcast	ips_param_arr[35].ip_param_value
#define	ips_ipv6_send_redirects		ips_param_arr[36].ip_param_value
#define	ips_ipv6_ignore_redirect	ips_param_arr[37].ip_param_value
#define	ips_ipv6_strict_dst_multihoming	ips_param_arr[38].ip_param_value
#define	ips_ip_ire_reclaim_fraction	ips_param_arr[39].ip_param_value
#define	ips_ipsec_policy_log_interval	ips_param_arr[40].ip_param_value
#define	ips_pim_accept_clear_messages	ips_param_arr[41].ip_param_value
#define	ips_ip_ndp_unsolicit_interval	ips_param_arr[42].ip_param_value
#define	ips_ip_ndp_unsolicit_count	ips_param_arr[43].ip_param_value
#define	ips_ipv6_ignore_home_address_opt ips_param_arr[44].ip_param_value
#define	ips_ip_policy_mask		ips_param_arr[45].ip_param_value
#define	ips_ip_multirt_resolution_interval ips_param_arr[46].ip_param_value
#define	ips_ip_multirt_ttl  		ips_param_arr[47].ip_param_value
#define	ips_ip_multidata_outbound	ips_param_arr[48].ip_param_value
#define	ips_ip_ndp_defense_interval	ips_param_arr[49].ip_param_value
#define	ips_ip_max_temp_idle		ips_param_arr[50].ip_param_value
#define	ips_ip_max_temp_defend		ips_param_arr[51].ip_param_value
#define	ips_ip_max_defend		ips_param_arr[52].ip_param_value
#define	ips_ip_defend_interval		ips_param_arr[53].ip_param_value
#define	ips_ip_dup_recovery		ips_param_arr[54].ip_param_value
#define	ips_ip_restrict_interzone_loopback ips_param_arr[55].ip_param_value
#define	ips_ip_lso_outbound		ips_param_arr[56].ip_param_value
#define	ips_ipv6_drop_inbound_icmpv6	ips_param_arr[57].ip_param_value

extern int	dohwcksum;	/* use h/w cksum if supported by the h/w */
#ifdef ZC_TEST
extern int	noswcksum;
#endif

extern char	ipif_loopback_name[];

extern nv_t	*ire_nv_tbl;

extern struct module_info ip_mod_info;

#define	HOOKS4_INTERESTED_PHYSICAL_IN(ipst)	\
	((ipst)->ips_ip4_physical_in_event.he_interested)
#define	HOOKS6_INTERESTED_PHYSICAL_IN(ipst)	\
	((ipst)->ips_ip6_physical_in_event.he_interested)
#define	HOOKS4_INTERESTED_PHYSICAL_OUT(ipst)	\
	((ipst)->ips_ip4_physical_out_event.he_interested)
#define	HOOKS6_INTERESTED_PHYSICAL_OUT(ipst)	\
	((ipst)->ips_ip6_physical_out_event.he_interested)
#define	HOOKS4_INTERESTED_FORWARDING(ipst)	\
	((ipst)->ips_ip4_forwarding_event.he_interested)
#define	HOOKS6_INTERESTED_FORWARDING(ipst)	\
	((ipst)->ips_ip6_forwarding_event.he_interested)
#define	HOOKS4_INTERESTED_LOOPBACK_IN(ipst)	\
	((ipst)->ips_ip4_loopback_in_event.he_interested)
#define	HOOKS6_INTERESTED_LOOPBACK_IN(ipst)	\
	((ipst)->ips_ip6_loopback_in_event.he_interested)
#define	HOOKS4_INTERESTED_LOOPBACK_OUT(ipst)	\
	((ipst)->ips_ip4_loopback_out_event.he_interested)
#define	HOOKS6_INTERESTED_LOOPBACK_OUT(ipst)	\
	((ipst)->ips_ip6_loopback_out_event.he_interested)

/*
 * Hooks marcos used inside of ip
 */
#define	IPHA_VHL	ipha_version_and_hdr_length

#define	FW_HOOKS(_hook, _event, _ilp, _olp, _iph, _fm, _m, ipst)	\
									\
	if ((_hook).he_interested) {	\
		hook_pkt_event_t info;					\
									\
		_NOTE(CONSTCOND)					\
		ASSERT((_ilp != NULL) || (_olp != NULL));		\
									\
		_NOTE(CONSTCOND)					\
		if ((_ilp != NULL) &&					\
		    (((ill_t *)(_ilp))->ill_phyint != NULL))		\
			info.