| /*- |
| * Copyright (c) 1998 Michael Smith <msmith@freebsd.org> |
| * Copyright (c) 2004, 2006 Marcel Moolenaar |
| * Copyright (c) 2014 The FreeBSD Foundation |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #include <sys/cdefs.h> |
| |
| #include <stand.h> |
| #include <string.h> |
| #include <sys/param.h> |
| #include <sys/reboot.h> |
| #include <sys/linker.h> |
| #include <sys/boot.h> |
| #include <machine/cpufunc.h> |
| #include <machine/elf.h> |
| #include <machine/metadata.h> |
| #include <machine/psl.h> |
| |
| #include <efi.h> |
| #include <efilib.h> |
| |
| #include "bootstrap.h" |
| #include "loader_efi.h" |
| |
| #if defined(__amd64__) |
| #include <machine/specialreg.h> |
| #include "framebuffer.h" |
| #endif |
| |
| #if defined(LOADER_FDT_SUPPORT) |
| #include <fdt_platform.h> |
| #endif |
| |
| int bi_load(char *args, vm_offset_t *modulep, vm_offset_t *kernendp); |
| |
| extern EFI_SYSTEM_TABLE *ST; |
| |
| static const char howto_switches[] = "aCdrgDmphsv"; |
| static int howto_masks[] = { |
| RB_ASKNAME, RB_CDROM, RB_KDB, RB_DFLTROOT, RB_GDB, RB_MULTIPLE, |
| RB_MUTE, RB_PAUSE, RB_SERIAL, RB_SINGLE, RB_VERBOSE |
| }; |
| |
| static int |
| bi_getboothowto(char *kargs) |
| { |
| const char *sw; |
| char *opts; |
| char *console; |
| int howto, i; |
| |
| howto = 0; |
| |
| /* Get the boot options from the environment first. */ |
| for (i = 0; howto_names[i].ev != NULL; i++) { |
| if (getenv(howto_names[i].ev) != NULL) |
| howto |= howto_names[i].mask; |
| } |
| |
| console = getenv("console"); |
| if (console != NULL) { |
| if (strcmp(console, "comconsole") == 0) |
| howto |= RB_SERIAL; |
| if (strcmp(console, "nullconsole") == 0) |
| howto |= RB_MUTE; |
| } |
| |
| /* Parse kargs */ |
| if (kargs == NULL) |
| return (howto); |
| |
| opts = strchr(kargs, '-'); |
| while (opts != NULL) { |
| while (*(++opts) != '\0') { |
| sw = strchr(howto_switches, *opts); |
| if (sw == NULL) |
| break; |
| howto |= howto_masks[sw - howto_switches]; |
| } |
| opts = strchr(opts, '-'); |
| } |
| |
| return (howto); |
| } |
| |
| /* |
| * Copy the environment into the load area starting at (addr). |
| * Each variable is formatted as <name>=<value>, with a single nul |
| * separating each variable, and a double nul terminating the environment. |
| */ |
| vm_offset_t |
| bi_copyenv(vm_offset_t start) |
| { |
| struct env_var *ep; |
| vm_offset_t addr, last; |
| size_t len; |
| |
| addr = last = start; |
| |
| /* Traverse the environment. */ |
| for (ep = environ; ep != NULL; ep = ep->ev_next) { |
| len = strlen(ep->ev_name); |
| if ((size_t)archsw.arch_copyin(ep->ev_name, addr, len) != len) |
| break; |
| addr += len; |
| if (archsw.arch_copyin("=", addr, 1) != 1) |
| break; |
| addr++; |
| if (ep->ev_value != NULL) { |
| len = strlen(ep->ev_value); |
| if ((size_t)archsw.arch_copyin(ep->ev_value, addr, len) != len) |
| break; |
| addr += len; |
| } |
| if (archsw.arch_copyin("", addr, 1) != 1) |
| break; |
| last = ++addr; |
| } |
| |
| if (archsw.arch_copyin("", last++, 1) != 1) |
| last = start; |
| return(last); |
| } |
| |
| /* |
| * Copy module-related data into the load area, where it can be |
| * used as a directory for loaded modules. |
| * |
| * Module data is presented in a self-describing format. Each datum |
| * is preceded by a 32-bit identifier and a 32-bit size field. |
| * |
| * Currently, the following data are saved: |
| * |
| * MOD_NAME (variable) module name (string) |
| * MOD_TYPE (variable) module type (string) |
| * MOD_ARGS (variable) module parameters (string) |
| * MOD_ADDR sizeof(vm_offset_t) module load address |
| * MOD_SIZE sizeof(size_t) module size |
| * MOD_METADATA (variable) type-specific metadata |
| */ |
| #define COPY32(v, a, c) { \ |
| uint32_t x = (v); \ |
| if (c) \ |
| archsw.arch_copyin(&x, a, sizeof(x)); \ |
| a += sizeof(x); \ |
| } |
| |
| #define MOD_STR(t, a, s, c) { \ |
| COPY32(t, a, c); \ |
| COPY32(strlen(s) + 1, a, c); \ |
| if (c) \ |
| archsw.arch_copyin(s, a, strlen(s) + 1); \ |
| a += roundup(strlen(s) + 1, sizeof(u_long)); \ |
| } |
| |
| #define MOD_NAME(a, s, c) MOD_STR(MODINFO_NAME, a, s, c) |
| #define MOD_TYPE(a, s, c) MOD_STR(MODINFO_TYPE, a, s, c) |
| #define MOD_ARGS(a, s, c) MOD_STR(MODINFO_ARGS, a, s, c) |
| |
| #define MOD_VAR(t, a, s, c) { \ |
| COPY32(t, a, c); \ |
| COPY32(sizeof(s), a, c); \ |
| if (c) \ |
| archsw.arch_copyin(&s, a, sizeof(s)); \ |
| a += roundup(sizeof(s), sizeof(u_long)); \ |
| } |
| |
| #define MOD_ADDR(a, s, c) MOD_VAR(MODINFO_ADDR, a, s, c) |
| #define MOD_SIZE(a, s, c) MOD_VAR(MODINFO_SIZE, a, s, c) |
| |
| #define MOD_METADATA(a, mm, c) { \ |
| COPY32(MODINFO_METADATA | mm->md_type, a, c); \ |
| COPY32(mm->md_size, a, c); \ |
| if (c) \ |
| archsw.arch_copyin(mm->md_data, a, mm->md_size); \ |
| a += roundup(mm->md_size, sizeof(u_long)); \ |
| } |
| |
| #define MOD_END(a, c) { \ |
| COPY32(MODINFO_END, a, c); \ |
| COPY32(0, a, c); \ |
| } |
| |
| static vm_offset_t |
| bi_copymodules(vm_offset_t addr) |
| { |
| struct preloaded_file *fp; |
| struct file_metadata *md; |
| int c; |
| uint64_t v; |
| |
| c = addr != 0; |
| /* Start with the first module on the list, should be the kernel. */ |
| for (fp = file_findfile(NULL, NULL); fp != NULL; fp = fp->f_next) { |
| MOD_NAME(addr, fp->f_name, c); /* This must come first. */ |
| MOD_TYPE(addr, fp->f_type, c); |
| if (fp->f_args) |
| MOD_ARGS(addr, fp->f_args, c); |
| v = fp->f_addr; |
| #if defined(__arm__) |
| v -= __elfN(relocation_offset); |
| #endif |
| MOD_ADDR(addr, v, c); |
| v = fp->f_size; |
| MOD_SIZE(addr, v, c); |
| for (md = fp->f_metadata; md != NULL; md = md->md_next) |
| if (!(md->md_type & MODINFOMD_NOCOPY)) |
| MOD_METADATA(addr, md, c); |
| } |
| MOD_END(addr, c); |
| return(addr); |
| } |
| |
| static int |
| bi_load_efi_data(struct preloaded_file *kfp) |
| { |
| EFI_MEMORY_DESCRIPTOR *mm; |
| EFI_PHYSICAL_ADDRESS addr; |
| EFI_STATUS status; |
| size_t efisz; |
| UINTN efi_mapkey; |
| UINTN mmsz, pages, retry, sz; |
| UINT32 mmver; |
| struct efi_map_header *efihdr; |
| |
| #if defined(__amd64__) |
| struct efi_fb efifb; |
| |
| if (efi_find_framebuffer(&efifb) == 0) { |
| printf("EFI framebuffer information:\n"); |
| printf("addr, size 0x%lx, 0x%lx\n", efifb.fb_addr, |
| efifb.fb_size); |
| printf("dimensions %d x %d\n", efifb.fb_width, |
| efifb.fb_height); |
| printf("stride %d\n", efifb.fb_stride); |
| printf("masks 0x%08x, 0x%08x, 0x%08x, 0x%08x\n", |
| efifb.fb_mask_red, efifb.fb_mask_green, efifb.fb_mask_blue, |
| efifb.fb_mask_reserved); |
| |
| file_addmetadata(kfp, MODINFOMD_EFI_FB, sizeof(efifb), &efifb); |
| } |
| #endif |
| |
| efisz = (sizeof(struct efi_map_header) + 0xf) & ~0xf; |
| |
| /* |
| * It is possible that the first call to ExitBootServices may change |
| * the map key. Fetch a new map key and retry ExitBootServices in that |
| * case. |
| */ |
| for (retry = 2; retry > 0; retry--) { |
| /* |
| * Allocate enough pages to hold the bootinfo block and the |
| * memory map EFI will return to us. The memory map has an |
| * unknown size, so we have to determine that first. Note that |
| * the AllocatePages call can itself modify the memory map, so |
| * we have to take that into account as well. The changes to |
| * the memory map are caused by splitting a range of free |
| * memory into two (AFAICT), so that one is marked as being |
| * loader data. |
| */ |
| sz = 0; |
| BS->GetMemoryMap(&sz, NULL, &efi_mapkey, &mmsz, &mmver); |
| sz += mmsz; |
| sz = (sz + 0xf) & ~0xf; |
| pages = EFI_SIZE_TO_PAGES(sz + efisz); |
| status = BS->AllocatePages(AllocateAnyPages, EfiLoaderData, |
| pages, &addr); |
| if (EFI_ERROR(status)) { |
| printf("%s: AllocatePages error %lu\n", __func__, |
| EFI_ERROR_CODE(status)); |
| return (ENOMEM); |
| } |
| |
| /* |
| * Read the memory map and stash it after bootinfo. Align the |
| * memory map on a 16-byte boundary (the bootinfo block is page |
| * aligned). |
| */ |
| efihdr = (struct efi_map_header *)(uintptr_t)addr; |
| mm = (void *)((uint8_t *)efihdr + efisz); |
| sz = (EFI_PAGE_SIZE * pages) - efisz; |
| |
| status = BS->GetMemoryMap(&sz, mm, &efi_mapkey, &mmsz, &mmver); |
| if (EFI_ERROR(status)) { |
| printf("%s: GetMemoryMap error %lu\n", __func__, |
| EFI_ERROR_CODE(status)); |
| return (EINVAL); |
| } |
| status = BS->ExitBootServices(IH, efi_mapkey); |
| if (EFI_ERROR(status) == 0) { |
| efihdr->memory_size = sz; |
| efihdr->descriptor_size = mmsz; |
| efihdr->descriptor_version = mmver; |
| file_addmetadata(kfp, MODINFOMD_EFI_MAP, efisz + sz, |
| efihdr); |
| return (0); |
| } |
| BS->FreePages(addr, pages); |
| } |
| printf("ExitBootServices error %lu\n", EFI_ERROR_CODE(status)); |
| return (EINVAL); |
| } |
| |
| /* |
| * Load the information expected by an amd64 kernel. |
| * |
| * - The 'boothowto' argument is constructed. |
| * - The 'bootdev' argument is constructed. |
| * - The 'bootinfo' struct is constructed, and copied into the kernel space. |
| * - The kernel environment is copied into kernel space. |
| * - Module metadata are formatted and placed in kernel space. |
| */ |
| int |
| bi_load(char *args, vm_offset_t *modulep, vm_offset_t *kernendp) |
| { |
| struct preloaded_file *xp, *kfp; |
| struct devdesc *rootdev; |
| struct file_metadata *md; |
| vm_offset_t addr; |
| uint64_t kernend; |
| uint64_t envp; |
| vm_offset_t size; |
| char *rootdevname; |
| int howto; |
| #if defined(LOADER_FDT_SUPPORT) |
| vm_offset_t dtbp; |
| int dtb_size; |
| #endif |
| #if defined(__arm__) |
| vm_offset_t vaddr; |
| size_t i; |
| /* |
| * These metadata addreses must be converted for kernel after |
| * relocation. |
| */ |
| uint32_t mdt[] = { |
| MODINFOMD_SSYM, MODINFOMD_ESYM, MODINFOMD_KERNEND, |
| MODINFOMD_ENVP, |
| #if defined(LOADER_FDT_SUPPORT) |
| MODINFOMD_DTBP |
| #endif |
| }; |
| #endif |
| |
| howto = bi_getboothowto(args); |
| |
| /* |
| * Allow the environment variable 'rootdev' to override the supplied |
| * device. This should perhaps go to MI code and/or have $rootdev |
| * tested/set by MI code before launching the kernel. |
| */ |
| rootdevname = getenv("rootdev"); |
| archsw.arch_getdev((void**)(&rootdev), rootdevname, NULL); |
| if (rootdev == NULL) { |
| printf("Can't determine root device.\n"); |
| return(EINVAL); |
| } |
| |
| /* Try reading the /etc/fstab file to select the root device */ |
| getrootmount(efi_fmtdev((void *)rootdev)); |
| |
| addr = 0; |
| for (xp = file_findfile(NULL, NULL); xp != NULL; xp = xp->f_next) { |
| if (addr < (xp->f_addr + xp->f_size)) |
| addr = xp->f_addr + xp->f_size; |
| } |
| |
| /* Pad to a page boundary. */ |
| addr = roundup(addr, PAGE_SIZE); |
| |
| /* Copy our environment. */ |
| envp = addr; |
| addr = bi_copyenv(addr); |
| |
| /* Pad to a page boundary. */ |
| addr = roundup(addr, PAGE_SIZE); |
| |
| #if defined(LOADER_FDT_SUPPORT) |
| /* Handle device tree blob */ |
| dtbp = addr; |
| dtb_size = fdt_copy(addr); |
| |
| /* Pad to a page boundary */ |
| if (dtb_size) |
| addr += roundup(dtb_size, PAGE_SIZE); |
| #endif |
| |
| kfp = file_findfile(NULL, "elf kernel"); |
| if (kfp == NULL) |
| kfp = file_findfile(NULL, "elf64 kernel"); |
| if (kfp == NULL) |
| panic("can't find kernel file"); |
| kernend = 0; /* fill it in later */ |
| file_addmetadata(kfp, MODINFOMD_HOWTO, sizeof howto, &howto); |
| file_addmetadata(kfp, MODINFOMD_ENVP, sizeof envp, &envp); |
| #if defined(LOADER_FDT_SUPPORT) |
| if (dtb_size) |
| file_addmetadata(kfp, MODINFOMD_DTBP, sizeof dtbp, &dtbp); |
| else |
| pager_output("WARNING! Trying to fire up the kernel, but no " |
| "device tree blob found!\n"); |
| #endif |
| file_addmetadata(kfp, MODINFOMD_KERNEND, sizeof kernend, &kernend); |
| file_addmetadata(kfp, MODINFOMD_FW_HANDLE, sizeof ST, &ST); |
| |
| bi_load_efi_data(kfp); |
| |
| /* Figure out the size and location of the metadata. */ |
| *modulep = addr; |
| size = bi_copymodules(0); |
| kernend = roundup(addr + size, PAGE_SIZE); |
| *kernendp = kernend; |
| |
| /* patch MODINFOMD_KERNEND */ |
| md = file_findmetadata(kfp, MODINFOMD_KERNEND); |
| bcopy(&kernend, md->md_data, sizeof kernend); |
| |
| #if defined(__arm__) |
| *modulep -= __elfN(relocation_offset); |
| |
| /* Do relocation fixup on metadata of each module. */ |
| for (xp = file_findfile(NULL, NULL); xp != NULL; xp = xp->f_next) { |
| for (i = 0; i < nitems(mdt); i++) { |
| md = file_findmetadata(xp, mdt[i]); |
| if (md) { |
| bcopy(md->md_data, &vaddr, sizeof vaddr); |
| vaddr -= __elfN(relocation_offset); |
| bcopy(&vaddr, md->md_data, sizeof vaddr); |
| } |
| } |
| } |
| #endif |
| |
| /* Copy module list and metadata. */ |
| (void)bi_copymodules(addr); |
| |
| return (0); |
| } |