| /* |
| * Copyright 2010 Sun Microsystems, Inc. All rights reserved. |
| * Use is subject to license terms. |
| */ |
| |
| /* |
| * Copyright (c) 2005-2007 Damien Bergamini <damien.bergamini@free.fr> |
| * Copyright (c) 2006 Niall O'Higgins <niallo@openbsd.org> |
| * |
| * Permission to use, copy, modify, and distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * Ralink Technology RT2501USB/RT2601USB chipset driver |
| * http://www.ralinktech.com.tw/ |
| */ |
| #include <sys/types.h> |
| #include <sys/cmn_err.h> |
| #include <sys/strsubr.h> |
| #include <sys/modctl.h> |
| #include <sys/devops.h> |
| #include <sys/mac_provider.h> |
| #include <sys/mac_wifi.h> |
| #include <sys/net80211.h> |
| #include <sys/byteorder.h> |
| |
| #define USBDRV_MAJOR_VER 2 |
| #define USBDRV_MINOR_VER 0 |
| #include <sys/usb/usba.h> |
| #include <sys/usb/usba/usba_types.h> |
| |
| #include "rum_reg.h" |
| #include "rum_var.h" |
| #include "rt2573_ucode.h" |
| |
| static void *rum_soft_state_p = NULL; |
| |
| #define RAL_TXBUF_SIZE (IEEE80211_MAX_LEN) |
| #define RAL_RXBUF_SIZE (IEEE80211_MAX_LEN) |
| |
| /* quickly determine if a given rate is CCK or OFDM */ |
| #define RUM_RATE_IS_OFDM(rate) ((rate) >= 12 && (rate) != 22) |
| #define RUM_ACK_SIZE 14 /* 10 + 4(FCS) */ |
| #define RUM_CTS_SIZE 14 /* 10 + 4(FCS) */ |
| |
| #define RUM_N(a) (sizeof (a) / sizeof ((a)[0])) |
| |
| /* |
| * Supported rates for 802.11a/b/g modes (in 500Kbps unit). |
| */ |
| static const struct ieee80211_rateset rum_rateset_11a = |
| { 8, { 12, 18, 24, 36, 48, 72, 96, 108 } }; |
| |
| static const struct ieee80211_rateset rum_rateset_11b = |
| { 4, { 2, 4, 11, 22 } }; |
| |
| static const struct ieee80211_rateset rum_rateset_11g = |
| { 12, { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 } }; |
| |
| static const struct { |
| uint32_t reg; |
| uint32_t val; |
| } rum_def_mac[] = { |
| { RT2573_TXRX_CSR0, 0x025fb032 }, |
| { RT2573_TXRX_CSR1, 0x9eaa9eaf }, |
| { RT2573_TXRX_CSR2, 0x8a8b8c8d }, |
| { RT2573_TXRX_CSR3, 0x00858687 }, |
| { RT2573_TXRX_CSR7, 0x2e31353b }, |
| { RT2573_TXRX_CSR8, 0x2a2a2a2c }, |
| { RT2573_TXRX_CSR15, 0x0000000f }, |
| { RT2573_MAC_CSR6, 0x00000fff }, |
| { RT2573_MAC_CSR8, 0x016c030a }, |
| { RT2573_MAC_CSR10, 0x00000718 }, |
| { RT2573_MAC_CSR12, 0x00000004 }, |
| { RT2573_MAC_CSR13, 0x00007f00 }, |
| { RT2573_SEC_CSR0, 0x00000000 }, |
| { RT2573_SEC_CSR1, 0x00000000 }, |
| { RT2573_SEC_CSR5, 0x00000000 }, |
| { RT2573_PHY_CSR1, 0x000023b0 }, |
| { RT2573_PHY_CSR5, 0x00040a06 }, |
| { RT2573_PHY_CSR6, 0x00080606 }, |
| { RT2573_PHY_CSR7, 0x00000408 }, |
| { RT2573_AIFSN_CSR, 0x00002273 }, |
| { RT2573_CWMIN_CSR, 0x00002344 }, |
| { RT2573_CWMAX_CSR, 0x000034aa } |
| }; |
| |
| static const struct { |
| uint8_t reg; |
| uint8_t val; |
| } rum_def_bbp[] = { |
| { 3, 0x80 }, |
| { 15, 0x30 }, |
| { 17, 0x20 }, |
| { 21, 0xc8 }, |
| { 22, 0x38 }, |
| { 23, 0x06 }, |
| { 24, 0xfe }, |
| { 25, 0x0a }, |
| { 26, 0x0d }, |
| { 32, 0x0b }, |
| { 34, 0x12 }, |
| { 37, 0x07 }, |
| { 39, 0xf8 }, |
| { 41, 0x60 }, |
| { 53, 0x10 }, |
| { 54, 0x18 }, |
| { 60, 0x10 }, |
| { 61, 0x04 }, |
| { 62, 0x04 }, |
| { 75, 0xfe }, |
| { 86, 0xfe }, |
| { 88, 0xfe }, |
| { 90, 0x0f }, |
| { 99, 0x00 }, |
| { 102, 0x16 }, |
| { 107, 0x04 } |
| }; |
| |
| static const struct rfprog { |
| uint8_t chan; |
| uint32_t r1, r2, r3, r4; |
| } rum_rf5226[] = { |
| { 1, 0x00b03, 0x001e1, 0x1a014, 0x30282 }, |
| { 2, 0x00b03, 0x001e1, 0x1a014, 0x30287 }, |
| { 3, 0x00b03, 0x001e2, 0x1a014, 0x30282 }, |
| { 4, 0x00b03, 0x001e2, 0x1a014, 0x30287 }, |
| { 5, 0x00b03, 0x001e3, 0x1a014, 0x30282 }, |
| { 6, 0x00b03, 0x001e3, 0x1a014, 0x30287 }, |
| { 7, 0x00b03, 0x001e4, 0x1a014, 0x30282 }, |
| { 8, 0x00b03, 0x001e4, 0x1a014, 0x30287 }, |
| { 9, 0x00b03, 0x001e5, 0x1a014, 0x30282 }, |
| { 10, 0x00b03, 0x001e5, 0x1a014, 0x30287 }, |
| { 11, 0x00b03, 0x001e6, 0x1a014, 0x30282 }, |
| { 12, 0x00b03, 0x001e6, 0x1a014, 0x30287 }, |
| { 13, 0x00b03, 0x001e7, 0x1a014, 0x30282 }, |
| { 14, 0x00b03, 0x001e8, 0x1a014, 0x30284 }, |
| |
| { 34, 0x00b03, 0x20266, 0x36014, 0x30282 }, |
| { 38, 0x00b03, 0x20267, 0x36014, 0x30284 }, |
| { 42, 0x00b03, 0x20268, 0x36014, 0x30286 }, |
| { 46, 0x00b03, 0x20269, 0x36014, 0x30288 }, |
| |
| { 36, 0x00b03, 0x00266, 0x26014, 0x30288 }, |
| { 40, 0x00b03, 0x00268, 0x26014, 0x30280 }, |
| { 44, 0x00b03, 0x00269, 0x26014, 0x30282 }, |
| { 48, 0x00b03, 0x0026a, 0x26014, 0x30284 }, |
| { 52, 0x00b03, 0x0026b, 0x26014, 0x30286 }, |
| { 56, 0x00b03, 0x0026c, 0x26014, 0x30288 }, |
| { 60, 0x00b03, 0x0026e, 0x26014, 0x30280 }, |
| { 64, 0x00b03, 0x0026f, 0x26014, 0x30282 }, |
| |
| { 100, 0x00b03, 0x0028a, 0x2e014, 0x30280 }, |
| { 104, 0x00b03, 0x0028b, 0x2e014, 0x30282 }, |
| { 108, 0x00b03, 0x0028c, 0x2e014, 0x30284 }, |
| { 112, 0x00b03, 0x0028d, 0x2e014, 0x30286 }, |
| { 116, 0x00b03, 0x0028e, 0x2e014, 0x30288 }, |
| { 120, 0x00b03, 0x002a0, 0x2e014, 0x30280 }, |
| { 124, 0x00b03, 0x002a1, 0x2e014, 0x30282 }, |
| { 128, 0x00b03, 0x002a2, 0x2e014, 0x30284 }, |
| { 132, 0x00b03, 0x002a3, 0x2e014, 0x30286 }, |
| { 136, 0x00b03, 0x002a4, 0x2e014, 0x30288 }, |
| { 140, 0x00b03, 0x002a6, 0x2e014, 0x30280 }, |
| |
| { 149, 0x00b03, 0x002a8, 0x2e014, 0x30287 }, |
| { 153, 0x00b03, 0x002a9, 0x2e014, 0x30289 }, |
| { 157, 0x00b03, 0x002ab, 0x2e014, 0x30281 }, |
| { 161, 0x00b03, 0x002ac, 0x2e014, 0x30283 }, |
| { 165, 0x00b03, 0x002ad, 0x2e014, 0x30285 } |
| }, rum_rf5225[] = { |
| { 1, 0x00b33, 0x011e1, 0x1a014, 0x30282 }, |
| { 2, 0x00b33, 0x011e1, 0x1a014, 0x30287 }, |
| { 3, 0x00b33, 0x011e2, 0x1a014, 0x30282 }, |
| { 4, 0x00b33, 0x011e2, 0x1a014, 0x30287 }, |
| { 5, 0x00b33, 0x011e3, 0x1a014, 0x30282 }, |
| { 6, 0x00b33, 0x011e3, 0x1a014, 0x30287 }, |
| { 7, 0x00b33, 0x011e4, 0x1a014, 0x30282 }, |
| { 8, 0x00b33, 0x011e4, 0x1a014, 0x30287 }, |
| { 9, 0x00b33, 0x011e5, 0x1a014, 0x30282 }, |
| { 10, 0x00b33, 0x011e5, 0x1a014, 0x30287 }, |
| { 11, 0x00b33, 0x011e6, 0x1a014, 0x30282 }, |
| { 12, 0x00b33, 0x011e6, 0x1a014, 0x30287 }, |
| { 13, 0x00b33, 0x011e7, 0x1a014, 0x30282 }, |
| { 14, 0x00b33, 0x011e8, 0x1a014, 0x30284 }, |
| |
| { 34, 0x00b33, 0x01266, 0x26014, 0x30282 }, |
| { 38, 0x00b33, 0x01267, 0x26014, 0x30284 }, |
| { 42, 0x00b33, 0x01268, 0x26014, 0x30286 }, |
| { 46, 0x00b33, 0x01269, 0x26014, 0x30288 }, |
| |
| { 36, 0x00b33, 0x01266, 0x26014, 0x30288 }, |
| { 40, 0x00b33, 0x01268, 0x26014, 0x30280 }, |
| { 44, 0x00b33, 0x01269, 0x26014, 0x30282 }, |
| { 48, 0x00b33, 0x0126a, 0x26014, 0x30284 }, |
| { 52, 0x00b33, 0x0126b, 0x26014, 0x30286 }, |
| { 56, 0x00b33, 0x0126c, 0x26014, 0x30288 }, |
| { 60, 0x00b33, 0x0126e, 0x26014, 0x30280 }, |
| { 64, 0x00b33, 0x0126f, 0x26014, 0x30282 }, |
| |
| { 100, 0x00b33, 0x0128a, 0x2e014, 0x30280 }, |
| { 104, 0x00b33, 0x0128b, 0x2e014, 0x30282 }, |
| { 108, 0x00b33, 0x0128c, 0x2e014, 0x30284 }, |
| { 112, 0x00b33, 0x0128d, 0x2e014, 0x30286 }, |
| { 116, 0x00b33, 0x0128e, 0x2e014, 0x30288 }, |
| { 120, 0x00b33, 0x012a0, 0x2e014, 0x30280 }, |
| { 124, 0x00b33, 0x012a1, 0x2e014, 0x30282 }, |
| { 128, 0x00b33, 0x012a2, 0x2e014, 0x30284 }, |
| { 132, 0x00b33, 0x012a3, 0x2e014, 0x30286 }, |
| { 136, 0x00b33, 0x012a4, 0x2e014, 0x30288 }, |
| { 140, 0x00b33, 0x012a6, 0x2e014, 0x30280 }, |
| |
| { 149, 0x00b33, 0x012a8, 0x2e014, 0x30287 }, |
| { 153, 0x00b33, 0x012a9, 0x2e014, 0x30289 }, |
| { 157, 0x00b33, 0x012ab, 0x2e014, 0x30281 }, |
| { 161, 0x00b33, 0x012ac, 0x2e014, 0x30283 }, |
| { 165, 0x00b33, 0x012ad, 0x2e014, 0x30285 } |
| }; |
| |
| /* |
| * device operations |
| */ |
| static int rum_attach(dev_info_t *, ddi_attach_cmd_t); |
| static int rum_detach(dev_info_t *, ddi_detach_cmd_t); |
| |
| /* |
| * Module Loading Data & Entry Points |
| */ |
| DDI_DEFINE_STREAM_OPS(rum_dev_ops, nulldev, nulldev, rum_attach, |
| rum_detach, nodev, NULL, D_MP, NULL, ddi_quiesce_not_needed); |
| |
| static struct modldrv rum_modldrv = { |
| &mod_driverops, /* Type of module. This one is a driver */ |
| "rum driver v1.2", /* short description */ |
| &rum_dev_ops /* driver specific ops */ |
| }; |
| |
| static struct modlinkage modlinkage = { |
| MODREV_1, |
| (void *)&rum_modldrv, |
| NULL |
| }; |
| |
| static int rum_m_stat(void *, uint_t, uint64_t *); |
| static int rum_m_start(void *); |
| static void rum_m_stop(void *); |
| static int rum_m_promisc(void *, boolean_t); |
| static int rum_m_multicst(void *, boolean_t, const uint8_t *); |
| static int rum_m_unicst(void *, const uint8_t *); |
| static mblk_t *rum_m_tx(void *, mblk_t *); |
| static void rum_m_ioctl(void *, queue_t *, mblk_t *); |
| static int rum_m_setprop(void *, const char *, mac_prop_id_t, |
| uint_t, const void *); |
| static int rum_m_getprop(void *, const char *, mac_prop_id_t, |
| uint_t, void *); |
| static void rum_m_propinfo(void *, const char *, mac_prop_id_t, |
| mac_prop_info_handle_t); |
| |
| static mac_callbacks_t rum_m_callbacks = { |
| MC_IOCTL | MC_SETPROP | MC_GETPROP | MC_PROPINFO, |
| rum_m_stat, |
| rum_m_start, |
| rum_m_stop, |
| rum_m_promisc, |
| rum_m_multicst, |
| rum_m_unicst, |
| rum_m_tx, |
| NULL, |
| rum_m_ioctl, |
| NULL, /* mc_getcapab */ |
| NULL, |
| NULL, |
| rum_m_setprop, |
| rum_m_getprop, |
| rum_m_propinfo |
| }; |
| |
| static void rum_amrr_start(struct rum_softc *, struct ieee80211_node *); |
| static int rum_tx_trigger(struct rum_softc *, mblk_t *); |
| static int rum_rx_trigger(struct rum_softc *); |
| |
| uint32_t rum_dbg_flags = 0; |
| |
| void |
| ral_debug(uint32_t dbg_flags, const int8_t *fmt, ...) |
| { |
| va_list args; |
| |
| if (dbg_flags & rum_dbg_flags) { |
| va_start(args, fmt); |
| vcmn_err(CE_CONT, fmt, args); |
| va_end(args); |
| } |
| } |
| |
| static void |
| rum_read_multi(struct rum_softc *sc, uint16_t reg, void *buf, int len) |
| { |
| usb_ctrl_setup_t req; |
| usb_cr_t cr; |
| usb_cb_flags_t cf; |
| mblk_t *mp; |
| int err; |
| |
| bzero(&req, sizeof (req)); |
| req.bmRequestType = USB_DEV_REQ_TYPE_VENDOR | USB_DEV_REQ_DEV_TO_HOST; |
| req.bRequest = RT2573_READ_MULTI_MAC; |
| req.wValue = 0; |
| req.wIndex = reg; |
| req.wLength = (uint16_t)len; |
| req.attrs = USB_ATTRS_AUTOCLEARING; |
| |
| mp = NULL; |
| err = usb_pipe_ctrl_xfer_wait(sc->sc_udev->dev_default_ph, &req, &mp, |
| &cr, &cf, 0); |
| |
| if (err != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_read_multi(): could not read MAC register:" |
| "cr:%s(%d), cf:(%x)\n", |
| usb_str_cr(cr), cr, cf); |
| return; |
| } |
| |
| bcopy(mp->b_rptr, buf, len); |
| freemsg(mp); |
| } |
| |
| static uint32_t |
| rum_read(struct rum_softc *sc, uint16_t reg) |
| { |
| uint32_t val; |
| |
| rum_read_multi(sc, reg, &val, sizeof (val)); |
| |
| return (LE_32(val)); |
| } |
| |
| static void |
| rum_write_multi(struct rum_softc *sc, uint16_t reg, void *buf, size_t len) |
| { |
| usb_ctrl_setup_t req; |
| usb_cr_t cr; |
| usb_cb_flags_t cf; |
| mblk_t *mp; |
| int err; |
| |
| bzero(&req, sizeof (req)); |
| req.bmRequestType = USB_DEV_REQ_TYPE_VENDOR | USB_DEV_REQ_HOST_TO_DEV; |
| req.bRequest = RT2573_WRITE_MULTI_MAC; |
| req.wValue = 0; |
| req.wIndex = reg; |
| req.wLength = (uint16_t)len; |
| req.attrs = USB_ATTRS_NONE; |
| |
| if ((mp = allocb(len, BPRI_HI)) == NULL) { |
| ral_debug(RAL_DBG_ERR, "rum_write_multi(): failed alloc mblk."); |
| return; |
| } |
| |
| bcopy(buf, mp->b_wptr, len); |
| mp->b_wptr += len; |
| |
| err = usb_pipe_ctrl_xfer_wait(sc->sc_udev->dev_default_ph, &req, &mp, |
| &cr, &cf, 0); |
| |
| if (err != USB_SUCCESS) { |
| ral_debug(RAL_DBG_USB, |
| "rum_write_multi(): could not write MAC register:" |
| "cr:%s(%d), cf:(%x)\n", |
| usb_str_cr(cr), cr, cf); |
| } |
| |
| freemsg(mp); |
| } |
| |
| static void |
| rum_write(struct rum_softc *sc, uint16_t reg, uint32_t val) |
| { |
| uint32_t tmp = LE_32(val); |
| |
| rum_write_multi(sc, reg, &tmp, sizeof (tmp)); |
| } |
| |
| #define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24)) |
| |
| static int |
| rum_load_microcode(struct rum_softc *sc) |
| { |
| usb_ctrl_setup_t req; |
| usb_cr_t cr; |
| usb_cb_flags_t cf; |
| int err; |
| |
| const uint8_t *ucode; |
| int size; |
| uint16_t reg = RT2573_MCU_CODE_BASE; |
| |
| ucode = rt2573_ucode; |
| size = sizeof (rt2573_ucode); |
| |
| /* copy firmware image into NIC */ |
| for (; size >= 4; reg += 4, ucode += 4, size -= 4) { |
| rum_write(sc, reg, UGETDW(ucode)); |
| /* rum_write(sc, reg, *(uint32_t *)(ucode)); */ |
| } |
| |
| bzero(&req, sizeof (req)); |
| req.bmRequestType = USB_DEV_REQ_TYPE_VENDOR | USB_DEV_REQ_HOST_TO_DEV; |
| req.bRequest = RT2573_MCU_CNTL; |
| req.wValue = RT2573_MCU_RUN; |
| req.wIndex = 0; |
| req.wLength = 0; |
| req.attrs = USB_ATTRS_NONE; |
| |
| err = usb_pipe_ctrl_xfer_wait(sc->sc_udev->dev_default_ph, &req, NULL, |
| &cr, &cf, 0); |
| |
| if (err != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_load_microcode(): could not run firmware: " |
| "cr:%s(%d), cf:(%x)\n", |
| usb_str_cr(cr), cr, cf); |
| } |
| |
| ral_debug(RAL_DBG_MSG, |
| "rum_load_microcode(%d): done\n", sizeof (rt2573_ucode)); |
| |
| return (err); |
| } |
| |
| static void |
| rum_eeprom_read(struct rum_softc *sc, uint16_t addr, void *buf, int len) |
| { |
| usb_ctrl_setup_t req; |
| usb_cr_t cr; |
| usb_cb_flags_t cf; |
| mblk_t *mp; |
| int err; |
| |
| bzero(&req, sizeof (req)); |
| req.bmRequestType = USB_DEV_REQ_TYPE_VENDOR | USB_DEV_REQ_DEV_TO_HOST; |
| req.bRequest = RT2573_READ_EEPROM; |
| req.wValue = 0; |
| req.wIndex = addr; |
| req.wLength = (uint16_t)len; |
| |
| mp = NULL; |
| err = usb_pipe_ctrl_xfer_wait(sc->sc_udev->dev_default_ph, &req, &mp, |
| &cr, &cf, 0); |
| |
| if (err != USB_SUCCESS) { |
| ral_debug(RAL_DBG_USB, |
| "rum_eeprom_read(): could not read EEPROM:" |
| "cr:%s(%d), cf:(%x)\n", |
| usb_str_cr(cr), cr, cf); |
| return; |
| } |
| |
| bcopy(mp->b_rptr, buf, len); |
| freemsg(mp); |
| } |
| |
| /* ARGSUSED */ |
| static void |
| rum_txeof(usb_pipe_handle_t pipe, usb_bulk_req_t *req) |
| { |
| struct rum_softc *sc = (struct rum_softc *)req->bulk_client_private; |
| struct ieee80211com *ic = &sc->sc_ic; |
| |
| ral_debug(RAL_DBG_TX, |
| "rum_txeof(): cr:%s(%d), flags:0x%x, tx_queued:%d", |
| usb_str_cr(req->bulk_completion_reason), |
| req->bulk_completion_reason, |
| req->bulk_cb_flags, |
| sc->tx_queued); |
| |
| if (req->bulk_completion_reason != USB_CR_OK) |
| sc->sc_tx_err++; |
| |
| mutex_enter(&sc->tx_lock); |
| |
| sc->tx_queued--; |
| sc->sc_tx_timer = 0; |
| |
| if (sc->sc_need_sched) { |
| sc->sc_need_sched = 0; |
| mac_tx_update(ic->ic_mach); |
| } |
| |
| mutex_exit(&sc->tx_lock); |
| usb_free_bulk_req(req); |
| } |
| |
| /* ARGSUSED */ |
| static void |
| rum_rxeof(usb_pipe_handle_t pipe, usb_bulk_req_t *req) |
| { |
| struct rum_softc *sc = (struct rum_softc *)req->bulk_client_private; |
| struct ieee80211com *ic = &sc->sc_ic; |
| |
| struct rum_rx_desc *desc; |
| struct ieee80211_frame *wh; |
| struct ieee80211_node *ni; |
| |
| mblk_t *m, *mp; |
| int len, pktlen; |
| char *rxbuf; |
| |
| mp = req->bulk_data; |
| req->bulk_data = NULL; |
| |
| ral_debug(RAL_DBG_RX, |
| "rum_rxeof(): cr:%s(%d), flags:0x%x, rx_queued:%d", |
| usb_str_cr(req->bulk_completion_reason), |
| req->bulk_completion_reason, |
| req->bulk_cb_flags, |
| sc->rx_queued); |
| |
| if (req->bulk_completion_reason != USB_CR_OK) { |
| sc->sc_rx_err++; |
| goto fail; |
| } |
| |
| len = msgdsize(mp); |
| rxbuf = (char *)mp->b_rptr; |
| |
| |
| if (len < RT2573_RX_DESC_SIZE + sizeof (struct ieee80211_frame_min)) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_rxeof(): xfer too short %d\n", len); |
| sc->sc_rx_err++; |
| goto fail; |
| } |
| |
| /* rx descriptor is located at the head, different from RT2500USB */ |
| desc = (struct rum_rx_desc *)rxbuf; |
| |
| if (LE_32(desc->flags) & RT2573_RX_CRC_ERROR) { |
| /* |
| * This should not happen since we did not request to receive |
| * those frames when we filled RT2573_TXRX_CSR0. |
| */ |
| ral_debug(RAL_DBG_ERR, "CRC error\n"); |
| sc->sc_rx_err++; |
| goto fail; |
| } |
| |
| pktlen = (LE_32(desc->flags) >> 16) & 0xfff; |
| |
| if (pktlen > (len - RT2573_RX_DESC_SIZE)) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_rxeof(): pktlen mismatch <%d, %d>.\n", pktlen, len); |
| goto fail; |
| } |
| |
| if ((m = allocb(pktlen, BPRI_MED)) == NULL) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_rxeof(): allocate mblk failed.\n"); |
| sc->sc_rx_nobuf++; |
| goto fail; |
| } |
| |
| bcopy(rxbuf + RT2573_RX_DESC_SIZE, m->b_rptr, pktlen); |
| m->b_wptr += pktlen; |
| |
| wh = (struct ieee80211_frame *)m->b_rptr; |
| ni = ieee80211_find_rxnode(ic, wh); |
| |
| /* send the frame to the 802.11 layer */ |
| (void) ieee80211_input(ic, m, ni, desc->rssi, 0); |
| |
| /* node is no longer needed */ |
| ieee80211_free_node(ni); |
| |
| fail: |
| mutex_enter(&sc->rx_lock); |
| sc->rx_queued--; |
| mutex_exit(&sc->rx_lock); |
| |
| freemsg(mp); |
| usb_free_bulk_req(req); |
| |
| if (RAL_IS_RUNNING(sc)) |
| (void) rum_rx_trigger(sc); |
| } |
| |
| /* |
| * Return the expected ack rate for a frame transmitted at rate `rate'. |
| */ |
| static int |
| rum_ack_rate(struct ieee80211com *ic, int rate) |
| { |
| switch (rate) { |
| /* CCK rates */ |
| case 2: |
| return (2); |
| case 4: |
| case 11: |
| case 22: |
| return ((ic->ic_curmode == IEEE80211_MODE_11B) ? 4 : rate); |
| |
| /* OFDM rates */ |
| case 12: |
| case 18: |
| return (12); |
| case 24: |
| case 36: |
| return (24); |
| case 48: |
| case 72: |
| case 96: |
| case 108: |
| return (48); |
| } |
| |
| /* default to 1Mbps */ |
| return (2); |
| } |
| |
| /* |
| * Compute the duration (in us) needed to transmit `len' bytes at rate `rate'. |
| * The function automatically determines the operating mode depending on the |
| * given rate. `flags' indicates whether short preamble is in use or not. |
| */ |
| static uint16_t |
| rum_txtime(int len, int rate, uint32_t flags) |
| { |
| uint16_t txtime; |
| |
| if (RUM_RATE_IS_OFDM(rate)) { |
| /* IEEE Std 802.11a-1999, pp. 37 */ |
| txtime = (8 + 4 * len + 3 + rate - 1) / rate; |
| txtime = 16 + 4 + 4 * txtime + 6; |
| } else { |
| /* IEEE Std 802.11b-1999, pp. 28 */ |
| txtime = (16 * len + rate - 1) / rate; |
| if (rate != 2 && (flags & IEEE80211_F_SHPREAMBLE)) |
| txtime += 72 + 24; |
| else |
| txtime += 144 + 48; |
| } |
| return (txtime); |
| } |
| |
| static uint8_t |
| rum_plcp_signal(int rate) |
| { |
| switch (rate) { |
| /* CCK rates (returned values are device-dependent) */ |
| case 2: return (0x0); |
| case 4: return (0x1); |
| case 11: return (0x2); |
| case 22: return (0x3); |
| |
| /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ |
| case 12: return (0xb); |
| case 18: return (0xf); |
| case 24: return (0xa); |
| case 36: return (0xe); |
| case 48: return (0x9); |
| case 72: return (0xd); |
| case 96: return (0x8); |
| case 108: return (0xc); |
| |
| /* unsupported rates (should not get there) */ |
| default: return (0xff); |
| } |
| } |
| |
| static void |
| rum_setup_tx_desc(struct rum_softc *sc, struct rum_tx_desc *desc, |
| uint32_t flags, uint16_t xflags, int len, int rate) |
| { |
| struct ieee80211com *ic = &sc->sc_ic; |
| uint16_t plcp_length; |
| int remainder; |
| |
| desc->flags = LE_32(flags); |
| desc->flags |= LE_32(RT2573_TX_VALID); |
| desc->flags |= LE_32(len << 16); |
| |
| desc->xflags = LE_16(xflags); |
| |
| desc->wme = LE_16(RT2573_QID(0) | RT2573_AIFSN(2) | |
| RT2573_LOGCWMIN(4) | RT2573_LOGCWMAX(10)); |
| |
| /* setup PLCP fields */ |
| desc->plcp_signal = rum_plcp_signal(rate); |
| desc->plcp_service = 4; |
| |
| len += IEEE80211_CRC_LEN; |
| if (RUM_RATE_IS_OFDM(rate)) { |
| desc->flags |= LE_32(RT2573_TX_OFDM); |
| |
| plcp_length = len & 0xfff; |
| desc->plcp_length_hi = plcp_length >> 6; |
| desc->plcp_length_lo = plcp_length & 0x3f; |
| } else { |
| plcp_length = (16 * len + rate - 1) / rate; |
| if (rate == 22) { |
| remainder = (16 * len) % 22; |
| if (remainder != 0 && remainder < 7) |
| desc->plcp_service |= RT2573_PLCP_LENGEXT; |
| } |
| desc->plcp_length_hi = plcp_length >> 8; |
| desc->plcp_length_lo = plcp_length & 0xff; |
| |
| if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) |
| desc->plcp_signal |= 0x08; |
| } |
| } |
| |
| #define RUM_TX_TIMEOUT 5 |
| |
| static int |
| rum_send(ieee80211com_t *ic, mblk_t *mp, uint8_t type) |
| { |
| struct rum_softc *sc = (struct rum_softc *)ic; |
| struct rum_tx_desc *desc; |
| |
| struct ieee80211_frame *wh; |
| struct ieee80211_key *k; |
| |
| uint16_t dur; |
| uint32_t flags = 0; |
| int rate, err = DDI_SUCCESS, rv; |
| |
| struct ieee80211_node *ni = NULL; |
| mblk_t *m, *m0; |
| int off, mblen, pktlen, xferlen; |
| |
| /* discard packets while suspending or not inited */ |
| if (!RAL_IS_RUNNING(sc)) { |
| freemsg(mp); |
| return (ENXIO); |
| } |
| |
| mutex_enter(&sc->tx_lock); |
| |
| if (sc->tx_queued > RAL_TX_LIST_COUNT) { |
| ral_debug(RAL_DBG_TX, "rum_send(): " |
| "no TX buffer available!\n"); |
| if ((type & IEEE80211_FC0_TYPE_MASK) == |
| IEEE80211_FC0_TYPE_DATA) { |
| sc->sc_need_sched = 1; |
| } |
| sc->sc_tx_nobuf++; |
| err = ENOMEM; |
| goto fail; |
| } |
| |
| m = allocb(RAL_TXBUF_SIZE + RT2573_TX_DESC_SIZE, BPRI_MED); |
| if (m == NULL) { |
| ral_debug(RAL_DBG_ERR, "rum_send(): can't alloc mblk.\n"); |
| err = DDI_FAILURE; |
| goto fail; |
| } |
| |
| m->b_rptr += RT2573_TX_DESC_SIZE; /* skip TX descriptor */ |
| m->b_wptr += RT2573_TX_DESC_SIZE; |
| |
| for (off = 0, m0 = mp; m0 != NULL; m0 = m0->b_cont) { |
| mblen = (uintptr_t)m0->b_wptr - (uintptr_t)m0->b_rptr; |
| (void) memcpy(m->b_rptr + off, m0->b_rptr, mblen); |
| off += mblen; |
| } |
| m->b_wptr += off; |
| |
| wh = (struct ieee80211_frame *)m->b_rptr; |
| |
| ni = ieee80211_find_txnode(ic, wh->i_addr1); |
| if (ni == NULL) { |
| err = DDI_FAILURE; |
| sc->sc_tx_err++; |
| freemsg(m); |
| goto fail; |
| } |
| |
| if ((type & IEEE80211_FC0_TYPE_MASK) == |
| IEEE80211_FC0_TYPE_DATA) { |
| (void) ieee80211_encap(ic, m, ni); |
| } |
| |
| if (wh->i_fc[1] & IEEE80211_FC1_WEP) { |
| k = ieee80211_crypto_encap(ic, m); |
| if (k == NULL) { |
| sc->sc_tx_err++; |
| err = DDI_FAILURE; |
| freemsg(m); |
| goto fail; |
| } |
| /* packet header may have moved, reset our local pointer */ |
| wh = (struct ieee80211_frame *)m->b_rptr; |
| } |
| |
| m->b_rptr -= RT2573_TX_DESC_SIZE; /* restore */ |
| desc = (struct rum_tx_desc *)m->b_rptr; |
| |
| if ((type & IEEE80211_FC0_TYPE_MASK) == |
| IEEE80211_FC0_TYPE_DATA) { /* DATA */ |
| if (ic->ic_fixed_rate != IEEE80211_FIXED_RATE_NONE) |
| rate = ic->ic_bss->in_rates.ir_rates[ic->ic_fixed_rate]; |
| else |
| rate = ni->in_rates.ir_rates[ni->in_txrate]; |
| |
| rate &= IEEE80211_RATE_VAL; |
| if (rate <= 0) { |
| rate = 2; /* basic rate */ |
| } |
| |
| |
| if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { |
| flags |= RT2573_TX_NEED_ACK; |
| flags |= RT2573_TX_MORE_FRAG; |
| |
| dur = rum_txtime(RUM_ACK_SIZE, rum_ack_rate(ic, rate), |
| ic->ic_flags) + sc->sifs; |
| *(uint16_t *)(uintptr_t)wh->i_dur = LE_16(dur); |
| } |
| } else { /* MGMT */ |
| rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan) ? 12 : 2; |
| |
| if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { |
| flags |= RT2573_TX_NEED_ACK; |
| |
| dur = rum_txtime(RUM_ACK_SIZE, rum_ack_rate(ic, rate), |
| ic->ic_flags) + sc->sifs; |
| *(uint16_t *)(uintptr_t)wh->i_dur = LE_16(dur); |
| |
| /* tell hardware to add timestamp for probe responses */ |
| if ((wh->i_fc[0] & |
| (IEEE80211_FC0_TYPE_MASK | |
| IEEE80211_FC0_SUBTYPE_MASK)) == |
| (IEEE80211_FC0_TYPE_MGT | |
| IEEE80211_FC0_SUBTYPE_PROBE_RESP)) |
| flags |= RT2573_TX_TIMESTAMP; |
| } |
| } |
| |
| pktlen = msgdsize(m) - RT2573_TX_DESC_SIZE; |
| rum_setup_tx_desc(sc, desc, flags, 0, pktlen, rate); |
| |
| /* align end on a 4-bytes boundary */ |
| xferlen = (RT2573_TX_DESC_SIZE + pktlen + 3) & ~3; |
| |
| /* |
| * No space left in the last URB to store the extra 4 bytes, force |
| * sending of another URB. |
| */ |
| if ((xferlen % 64) == 0) |
| xferlen += 4; |
| |
| m->b_wptr = m->b_rptr + xferlen; |
| |
| ral_debug(RAL_DBG_TX, "sending data frame len=%u rate=%u xfer len=%u\n", |
| pktlen, rate, xferlen); |
| |
| rv = rum_tx_trigger(sc, m); |
| |
| if (rv == 0) { |
| ic->ic_stats.is_tx_frags++; |
| ic->ic_stats.is_tx_bytes += pktlen; |
| } |
| |
| fail: |
| if (ni != NULL) |
| ieee80211_free_node(ni); |
| |
| if ((type & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_DATA || |
| err == 0) { |
| freemsg(mp); |
| } |
| |
| mutex_exit(&sc->tx_lock); |
| |
| return (err); |
| } |
| |
| static mblk_t * |
| rum_m_tx(void *arg, mblk_t *mp) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| struct ieee80211com *ic = &sc->sc_ic; |
| mblk_t *next; |
| |
| /* |
| * No data frames go out unless we're associated; this |
| * should not happen as the 802.11 layer does not enable |
| * the xmit queue until we enter the RUN state. |
| */ |
| if (ic->ic_state != IEEE80211_S_RUN) { |
| ral_debug(RAL_DBG_ERR, "rum_m_tx(): " |
| "discard, state %u\n", ic->ic_state); |
| freemsgchain(mp); |
| return (NULL); |
| } |
| |
| while (mp != NULL) { |
| next = mp->b_next; |
| mp->b_next = NULL; |
| if (rum_send(ic, mp, IEEE80211_FC0_TYPE_DATA) != DDI_SUCCESS) { |
| mp->b_next = next; |
| freemsgchain(mp); |
| return (NULL); |
| } |
| mp = next; |
| } |
| return (mp); |
| } |
| |
| static void |
| rum_bbp_write(struct rum_softc *sc, uint8_t reg, uint8_t val) |
| { |
| uint32_t tmp; |
| int ntries; |
| |
| for (ntries = 0; ntries < 5; ntries++) { |
| if (!(rum_read(sc, RT2573_PHY_CSR3) & RT2573_BBP_BUSY)) |
| break; |
| } |
| if (ntries == 5) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_bbp_write(): could not write to BBP\n"); |
| return; |
| } |
| |
| tmp = RT2573_BBP_BUSY | (reg & 0x7f) << 8 | val; |
| rum_write(sc, RT2573_PHY_CSR3, tmp); |
| } |
| |
| static uint8_t |
| rum_bbp_read(struct rum_softc *sc, uint8_t reg) |
| { |
| uint32_t val; |
| int ntries; |
| |
| for (ntries = 0; ntries < 5; ntries++) { |
| if (!(rum_read(sc, RT2573_PHY_CSR3) & RT2573_BBP_BUSY)) |
| break; |
| } |
| if (ntries == 5) { |
| ral_debug(RAL_DBG_ERR, "rum_bbp_read(): could not read BBP\n"); |
| return (0); |
| } |
| |
| val = RT2573_BBP_BUSY | RT2573_BBP_READ | reg << 8; |
| rum_write(sc, RT2573_PHY_CSR3, val); |
| |
| for (ntries = 0; ntries < 100; ntries++) { |
| val = rum_read(sc, RT2573_PHY_CSR3); |
| if (!(val & RT2573_BBP_BUSY)) |
| return (val & 0xff); |
| drv_usecwait(1); |
| } |
| |
| ral_debug(RAL_DBG_ERR, "rum_bbp_read(): could not read BBP\n"); |
| return (0); |
| } |
| |
| static void |
| rum_rf_write(struct rum_softc *sc, uint8_t reg, uint32_t val) |
| { |
| uint32_t tmp; |
| int ntries; |
| |
| for (ntries = 0; ntries < 5; ntries++) { |
| if (!(rum_read(sc, RT2573_PHY_CSR4) & RT2573_RF_BUSY)) |
| break; |
| } |
| if (ntries == 5) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_rf_write(): could not write to RF\n"); |
| return; |
| } |
| |
| tmp = RT2573_RF_BUSY | RT2573_RF_20BIT | (val & 0xfffff) << 2 | |
| (reg & 3); |
| rum_write(sc, RT2573_PHY_CSR4, tmp); |
| |
| /* remember last written value in sc */ |
| sc->rf_regs[reg] = val; |
| |
| ral_debug(RAL_DBG_HW, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0xfffff); |
| } |
| |
| static void |
| rum_select_antenna(struct rum_softc *sc) |
| { |
| uint8_t bbp4, bbp77; |
| uint32_t tmp; |
| |
| bbp4 = rum_bbp_read(sc, 4); |
| bbp77 = rum_bbp_read(sc, 77); |
| |
| /* make sure Rx is disabled before switching antenna */ |
| tmp = rum_read(sc, RT2573_TXRX_CSR0); |
| rum_write(sc, RT2573_TXRX_CSR0, tmp | RT2573_DISABLE_RX); |
| |
| rum_bbp_write(sc, 4, bbp4); |
| rum_bbp_write(sc, 77, bbp77); |
| |
| rum_write(sc, RT2573_TXRX_CSR0, tmp); |
| } |
| |
| /* |
| * Enable multi-rate retries for frames sent at OFDM rates. |
| * In 802.11b/g mode, allow fallback to CCK rates. |
| */ |
| static void |
| rum_enable_mrr(struct rum_softc *sc) |
| { |
| struct ieee80211com *ic = &sc->sc_ic; |
| uint32_t tmp; |
| |
| tmp = rum_read(sc, RT2573_TXRX_CSR4); |
| |
| tmp &= ~RT2573_MRR_CCK_FALLBACK; |
| if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan)) |
| tmp |= RT2573_MRR_CCK_FALLBACK; |
| tmp |= RT2573_MRR_ENABLED; |
| |
| rum_write(sc, RT2573_TXRX_CSR4, tmp); |
| } |
| |
| static void |
| rum_set_txpreamble(struct rum_softc *sc) |
| { |
| uint32_t tmp; |
| |
| tmp = rum_read(sc, RT2573_TXRX_CSR4); |
| |
| tmp &= ~RT2573_SHORT_PREAMBLE; |
| if (sc->sc_ic.ic_flags & IEEE80211_F_SHPREAMBLE) |
| tmp |= RT2573_SHORT_PREAMBLE; |
| |
| rum_write(sc, RT2573_TXRX_CSR4, tmp); |
| } |
| |
| static void |
| rum_set_basicrates(struct rum_softc *sc) |
| { |
| struct ieee80211com *ic = &sc->sc_ic; |
| |
| /* update basic rate set */ |
| if (ic->ic_curmode == IEEE80211_MODE_11B) { |
| /* 11b basic rates: 1, 2Mbps */ |
| rum_write(sc, RT2573_TXRX_CSR5, 0x3); |
| } else if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bss->in_chan)) { |
| /* 11a basic rates: 6, 12, 24Mbps */ |
| rum_write(sc, RT2573_TXRX_CSR5, 0x150); |
| } else { |
| /* 11b/g basic rates: 1, 2, 5.5, 11Mbps */ |
| rum_write(sc, RT2573_TXRX_CSR5, 0xf); |
| } |
| } |
| |
| /* |
| * Reprogram MAC/BBP to switch to a new band. Values taken from the reference |
| * driver. |
| */ |
| static void |
| rum_select_band(struct rum_softc *sc, struct ieee80211_channel *c) |
| { |
| uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104; |
| uint32_t tmp; |
| |
| /* update all BBP registers that depend on the band */ |
| bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c; |
| bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48; |
| if (IEEE80211_IS_CHAN_5GHZ(c)) { |
| bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c; |
| bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10; |
| } |
| if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || |
| (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { |
| bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10; |
| } |
| |
| sc->bbp17 = bbp17; |
| rum_bbp_write(sc, 17, bbp17); |
| rum_bbp_write(sc, 96, bbp96); |
| rum_bbp_write(sc, 104, bbp104); |
| |
| if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || |
| (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { |
| rum_bbp_write(sc, 75, 0x80); |
| rum_bbp_write(sc, 86, 0x80); |
| rum_bbp_write(sc, 88, 0x80); |
| } |
| |
| rum_bbp_write(sc, 35, bbp35); |
| rum_bbp_write(sc, 97, bbp97); |
| rum_bbp_write(sc, 98, bbp98); |
| |
| tmp = rum_read(sc, RT2573_PHY_CSR0); |
| tmp &= ~(RT2573_PA_PE_2GHZ | RT2573_PA_PE_5GHZ); |
| if (IEEE80211_IS_CHAN_2GHZ(c)) |
| tmp |= RT2573_PA_PE_2GHZ; |
| else |
| tmp |= RT2573_PA_PE_5GHZ; |
| rum_write(sc, RT2573_PHY_CSR0, tmp); |
| |
| /* 802.11a uses a 16 microseconds short interframe space */ |
| sc->sifs = IEEE80211_IS_CHAN_5GHZ(c) ? 16 : 10; |
| } |
| |
| static void |
| rum_set_chan(struct rum_softc *sc, struct ieee80211_channel *c) |
| { |
| struct ieee80211com *ic = &sc->sc_ic; |
| const struct rfprog *rfprog; |
| uint8_t bbp3, bbp94 = RT2573_BBPR94_DEFAULT; |
| int8_t power; |
| uint_t i, chan; |
| |
| chan = ieee80211_chan2ieee(ic, c); |
| if (chan == 0 || chan == IEEE80211_CHAN_ANY) |
| return; |
| |
| /* select the appropriate RF settings based on what EEPROM says */ |
| rfprog = (sc->rf_rev == RT2573_RF_5225 || |
| sc->rf_rev == RT2573_RF_2527) ? rum_rf5225 : rum_rf5226; |
| |
| /* find the settings for this channel (we know it exists) */ |
| for (i = 0; rfprog[i].chan != chan; i++) { |
| } |
| |
| power = sc->txpow[i]; |
| if (power < 0) { |
| bbp94 += power; |
| power = 0; |
| } else if (power > 31) { |
| bbp94 += power - 31; |
| power = 31; |
| } |
| |
| /* |
| * If we are switching from the 2GHz band to the 5GHz band or |
| * vice-versa, BBP registers need to be reprogrammed. |
| */ |
| if (c->ich_flags != ic->ic_curchan->ich_flags) { |
| rum_select_band(sc, c); |
| rum_select_antenna(sc); |
| } |
| ic->ic_curchan = c; |
| |
| rum_rf_write(sc, RT2573_RF1, rfprog[i].r1); |
| rum_rf_write(sc, RT2573_RF2, rfprog[i].r2); |
| rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7); |
| rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10); |
| |
| rum_rf_write(sc, RT2573_RF1, rfprog[i].r1); |
| rum_rf_write(sc, RT2573_RF2, rfprog[i].r2); |
| rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7 | 1); |
| rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10); |
| |
| rum_rf_write(sc, RT2573_RF1, rfprog[i].r1); |
| rum_rf_write(sc, RT2573_RF2, rfprog[i].r2); |
| rum_rf_write(sc, RT2573_RF3, rfprog[i].r3 | power << 7); |
| rum_rf_write(sc, RT2573_RF4, rfprog[i].r4 | sc->rffreq << 10); |
| |
| drv_usecwait(10); |
| |
| /* enable smart mode for MIMO-capable RFs */ |
| bbp3 = rum_bbp_read(sc, 3); |
| |
| bbp3 &= ~RT2573_SMART_MODE; |
| if (sc->rf_rev == RT2573_RF_5225 || sc->rf_rev == RT2573_RF_2527) |
| bbp3 |= RT2573_SMART_MODE; |
| |
| rum_bbp_write(sc, 3, bbp3); |
| |
| if (bbp94 != RT2573_BBPR94_DEFAULT) |
| rum_bbp_write(sc, 94, bbp94); |
| } |
| |
| /* |
| * Enable TSF synchronization and tell h/w to start sending beacons for IBSS |
| * and HostAP operating modes. |
| */ |
| static void |
| rum_enable_tsf_sync(struct rum_softc *sc) |
| { |
| struct ieee80211com *ic = &sc->sc_ic; |
| uint32_t tmp; |
| |
| if (ic->ic_opmode != IEEE80211_M_STA) { |
| /* |
| * Change default 16ms TBTT adjustment to 8ms. |
| * Must be done before enabling beacon generation. |
| */ |
| rum_write(sc, RT2573_TXRX_CSR10, 1 << 12 | 8); |
| } |
| |
| tmp = rum_read(sc, RT2573_TXRX_CSR9) & 0xff000000; |
| |
| /* set beacon interval (in 1/16ms unit) */ |
| tmp |= ic->ic_bss->in_intval * 16; |
| |
| tmp |= RT2573_TSF_TICKING | RT2573_ENABLE_TBTT; |
| if (ic->ic_opmode == IEEE80211_M_STA) |
| tmp |= RT2573_TSF_MODE(1); |
| else |
| tmp |= RT2573_TSF_MODE(2) | RT2573_GENERATE_BEACON; |
| |
| rum_write(sc, RT2573_TXRX_CSR9, tmp); |
| } |
| |
| /* ARGSUSED */ |
| static void |
| rum_update_slot(struct ieee80211com *ic, int onoff) |
| { |
| struct rum_softc *sc = (struct rum_softc *)ic; |
| uint8_t slottime; |
| uint32_t tmp; |
| |
| slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20; |
| |
| tmp = rum_read(sc, RT2573_MAC_CSR9); |
| tmp = (tmp & ~0xff) | slottime; |
| rum_write(sc, RT2573_MAC_CSR9, tmp); |
| |
| ral_debug(RAL_DBG_HW, "setting slot time to %uus\n", slottime); |
| } |
| |
| static void |
| rum_set_bssid(struct rum_softc *sc, const uint8_t *bssid) |
| { |
| uint32_t tmp; |
| |
| tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; |
| rum_write(sc, RT2573_MAC_CSR4, tmp); |
| |
| tmp = bssid[4] | bssid[5] << 8 | RT2573_ONE_BSSID << 16; |
| rum_write(sc, RT2573_MAC_CSR5, tmp); |
| } |
| |
| static void |
| rum_set_macaddr(struct rum_softc *sc, const uint8_t *addr) |
| { |
| uint32_t tmp; |
| |
| tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; |
| rum_write(sc, RT2573_MAC_CSR2, tmp); |
| |
| tmp = addr[4] | addr[5] << 8 | 0xff << 16; |
| rum_write(sc, RT2573_MAC_CSR3, tmp); |
| |
| ral_debug(RAL_DBG_HW, |
| "setting MAC address to " MACSTR "\n", MAC2STR(addr)); |
| } |
| |
| static void |
| rum_update_promisc(struct rum_softc *sc) |
| { |
| uint32_t tmp; |
| |
| tmp = rum_read(sc, RT2573_TXRX_CSR0); |
| |
| tmp &= ~RT2573_DROP_NOT_TO_ME; |
| if (!(sc->sc_rcr & RAL_RCR_PROMISC)) |
| tmp |= RT2573_DROP_NOT_TO_ME; |
| |
| rum_write(sc, RT2573_TXRX_CSR0, tmp); |
| |
| ral_debug(RAL_DBG_HW, "%s promiscuous mode\n", |
| (sc->sc_rcr & RAL_RCR_PROMISC) ? "entering" : "leaving"); |
| } |
| |
| static const char * |
| rum_get_rf(int rev) |
| { |
| switch (rev) { |
| case RT2573_RF_2527: return ("RT2527 (MIMO XR)"); |
| case RT2573_RF_2528: return ("RT2528"); |
| case RT2573_RF_5225: return ("RT5225 (MIMO XR)"); |
| case RT2573_RF_5226: return ("RT5226"); |
| default: return ("unknown"); |
| } |
| } |
| |
| static void |
| rum_read_eeprom(struct rum_softc *sc) |
| { |
| struct ieee80211com *ic = &sc->sc_ic; |
| uint16_t val; |
| |
| /* read MAC address */ |
| rum_eeprom_read(sc, RT2573_EEPROM_ADDRESS, ic->ic_macaddr, 6); |
| |
| rum_eeprom_read(sc, RT2573_EEPROM_ANTENNA, &val, 2); |
| val = LE_16(val); |
| sc->rf_rev = (val >> 11) & 0x1f; |
| sc->hw_radio = (val >> 10) & 0x1; |
| sc->rx_ant = (val >> 4) & 0x3; |
| sc->tx_ant = (val >> 2) & 0x3; |
| sc->nb_ant = val & 0x3; |
| |
| ral_debug(RAL_DBG_HW, "RF revision=%d\n", sc->rf_rev); |
| |
| rum_eeprom_read(sc, RT2573_EEPROM_CONFIG2, &val, 2); |
| val = LE_16(val); |
| sc->ext_5ghz_lna = (val >> 6) & 0x1; |
| sc->ext_2ghz_lna = (val >> 4) & 0x1; |
| |
| ral_debug(RAL_DBG_HW, "External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n", |
| sc->ext_2ghz_lna, sc->ext_5ghz_lna); |
| |
| rum_eeprom_read(sc, RT2573_EEPROM_RSSI_2GHZ_OFFSET, &val, 2); |
| val = LE_16(val); |
| if ((val & 0xff) != 0xff) |
| sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */ |
| |
| rum_eeprom_read(sc, RT2573_EEPROM_RSSI_5GHZ_OFFSET, &val, 2); |
| val = LE_16(val); |
| if ((val & 0xff) != 0xff) |
| sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */ |
| |
| ral_debug(RAL_DBG_HW, "RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n", |
| sc->rssi_2ghz_corr, sc->rssi_5ghz_corr); |
| |
| rum_eeprom_read(sc, RT2573_EEPROM_FREQ_OFFSET, &val, 2); |
| val = LE_16(val); |
| if ((val & 0xff) != 0xff) |
| sc->rffreq = val & 0xff; |
| |
| ral_debug(RAL_DBG_HW, "RF freq=%d\n", sc->rffreq); |
| |
| /* read Tx power for all a/b/g channels */ |
| rum_eeprom_read(sc, RT2573_EEPROM_TXPOWER, sc->txpow, 14); |
| /* default Tx power for 802.11a channels */ |
| (void) memset(sc->txpow + 14, 24, sizeof (sc->txpow) - 14); |
| |
| /* read default values for BBP registers */ |
| rum_eeprom_read(sc, RT2573_EEPROM_BBP_BASE, sc->bbp_prom, 2 * 16); |
| } |
| |
| static int |
| rum_bbp_init(struct rum_softc *sc) |
| { |
| int i, ntries; |
| |
| /* wait for BBP to be ready */ |
| for (ntries = 0; ntries < 100; ntries++) { |
| const uint8_t val = rum_bbp_read(sc, 0); |
| if (val != 0 && val != 0xff) |
| break; |
| drv_usecwait(1000); |
| } |
| if (ntries == 100) { |
| ral_debug(RAL_DBG_ERR, "timeout waiting for BBP\n"); |
| return (EIO); |
| } |
| |
| /* initialize BBP registers to default values */ |
| for (i = 0; i < RUM_N(rum_def_bbp); i++) |
| rum_bbp_write(sc, rum_def_bbp[i].reg, rum_def_bbp[i].val); |
| |
| /* write vendor-specific BBP values (from EEPROM) */ |
| for (i = 0; i < 16; i++) { |
| if (sc->bbp_prom[i].reg == 0 || sc->bbp_prom[i].reg == 0xff) |
| continue; |
| rum_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); |
| } |
| |
| return (0); |
| } |
| |
| /* |
| * This function is called periodically (every 200ms) during scanning to |
| * switch from one channel to another. |
| */ |
| static void |
| rum_next_scan(void *arg) |
| { |
| struct rum_softc *sc = arg; |
| struct ieee80211com *ic = &sc->sc_ic; |
| |
| if (ic->ic_state == IEEE80211_S_SCAN) |
| ieee80211_next_scan(ic); |
| } |
| |
| static int |
| rum_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) |
| { |
| struct rum_softc *sc = (struct rum_softc *)ic; |
| enum ieee80211_state ostate; |
| struct ieee80211_node *ni; |
| int err; |
| uint32_t tmp; |
| |
| RAL_LOCK(sc); |
| |
| ostate = ic->ic_state; |
| |
| if (sc->sc_scan_id != 0) { |
| (void) untimeout(sc->sc_scan_id); |
| sc->sc_scan_id = 0; |
| } |
| |
| if (sc->sc_amrr_id != 0) { |
| (void) untimeout(sc->sc_amrr_id); |
| sc->sc_amrr_id = 0; |
| } |
| |
| switch (nstate) { |
| case IEEE80211_S_INIT: |
| if (ostate == IEEE80211_S_RUN) { |
| /* abort TSF synchronization */ |
| tmp = rum_read(sc, RT2573_TXRX_CSR9); |
| rum_write(sc, RT2573_TXRX_CSR9, tmp & ~0x00ffffff); |
| } |
| break; |
| |
| case IEEE80211_S_SCAN: |
| rum_set_chan(sc, ic->ic_curchan); |
| sc->sc_scan_id = timeout(rum_next_scan, (void *)sc, |
| drv_usectohz(sc->dwelltime * 1000)); |
| break; |
| |
| case IEEE80211_S_AUTH: |
| rum_set_chan(sc, ic->ic_curchan); |
| break; |
| |
| case IEEE80211_S_ASSOC: |
| rum_set_chan(sc, ic->ic_curchan); |
| break; |
| |
| case IEEE80211_S_RUN: |
| rum_set_chan(sc, ic->ic_curchan); |
| |
| ni = ic->ic_bss; |
| |
| if (ic->ic_opmode != IEEE80211_M_MONITOR) { |
| rum_update_slot(ic, 1); |
| rum_enable_mrr(sc); |
| rum_set_txpreamble(sc); |
| rum_set_basicrates(sc); |
| rum_set_bssid(sc, ni->in_bssid); |
| } |
| |
| if (ic->ic_opmode != IEEE80211_M_MONITOR) |
| rum_enable_tsf_sync(sc); |
| |
| /* enable automatic rate adaptation in STA mode */ |
| if (ic->ic_opmode == IEEE80211_M_STA && |
| ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) |
| rum_amrr_start(sc, ni); |
| break; |
| } |
| |
| RAL_UNLOCK(sc); |
| |
| err = sc->sc_newstate(ic, nstate, arg); |
| /* |
| * Finally, start any timers. |
| */ |
| if (nstate == IEEE80211_S_RUN) |
| ieee80211_start_watchdog(ic, 1); |
| |
| return (err); |
| } |
| |
| static void |
| rum_close_pipes(struct rum_softc *sc) |
| { |
| usb_flags_t flags = USB_FLAGS_SLEEP; |
| |
| if (sc->sc_rx_pipeh != NULL) { |
| usb_pipe_reset(sc->sc_dev, sc->sc_rx_pipeh, flags, NULL, 0); |
| usb_pipe_close(sc->sc_dev, sc->sc_rx_pipeh, flags, NULL, 0); |
| sc->sc_rx_pipeh = NULL; |
| } |
| |
| if (sc->sc_tx_pipeh != NULL) { |
| usb_pipe_reset(sc->sc_dev, sc->sc_tx_pipeh, flags, NULL, 0); |
| usb_pipe_close(sc->sc_dev, sc->sc_tx_pipeh, flags, NULL, 0); |
| sc->sc_tx_pipeh = NULL; |
| } |
| } |
| |
| static int |
| rum_open_pipes(struct rum_softc *sc) |
| { |
| usb_ep_data_t *ep_node; |
| usb_pipe_policy_t policy; |
| int err; |
| |
| ep_node = usb_lookup_ep_data(sc->sc_dev, sc->sc_udev, 0, 0, 0, |
| USB_EP_ATTR_BULK, USB_EP_DIR_OUT); |
| |
| bzero(&policy, sizeof (usb_pipe_policy_t)); |
| policy.pp_max_async_reqs = RAL_TX_LIST_COUNT; |
| |
| if ((err = usb_pipe_open(sc->sc_dev, |
| &ep_node->ep_descr, &policy, USB_FLAGS_SLEEP, |
| &sc->sc_tx_pipeh)) != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_open_pipes(): %x failed to open tx pipe\n", err); |
| goto fail; |
| } |
| |
| ep_node = usb_lookup_ep_data(sc->sc_dev, sc->sc_udev, 0, 0, 0, |
| USB_EP_ATTR_BULK, USB_EP_DIR_IN); |
| |
| bzero(&policy, sizeof (usb_pipe_policy_t)); |
| policy.pp_max_async_reqs = RAL_RX_LIST_COUNT + 32; |
| |
| if ((err = usb_pipe_open(sc->sc_dev, |
| &ep_node->ep_descr, &policy, USB_FLAGS_SLEEP, |
| &sc->sc_rx_pipeh)) != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_open_pipes(): %x failed to open rx pipe\n", err); |
| goto fail; |
| } |
| |
| return (USB_SUCCESS); |
| |
| fail: |
| if (sc->sc_rx_pipeh != NULL) { |
| usb_pipe_close(sc->sc_dev, sc->sc_rx_pipeh, |
| USB_FLAGS_SLEEP, NULL, 0); |
| sc->sc_rx_pipeh = NULL; |
| } |
| |
| if (sc->sc_tx_pipeh != NULL) { |
| usb_pipe_close(sc->sc_dev, sc->sc_tx_pipeh, |
| USB_FLAGS_SLEEP, NULL, 0); |
| sc->sc_tx_pipeh = NULL; |
| } |
| |
| return (USB_FAILURE); |
| } |
| |
| static int |
| rum_tx_trigger(struct rum_softc *sc, mblk_t *mp) |
| { |
| usb_bulk_req_t *req; |
| int err; |
| |
| sc->sc_tx_timer = RUM_TX_TIMEOUT; |
| |
| req = usb_alloc_bulk_req(sc->sc_dev, 0, USB_FLAGS_SLEEP); |
| if (req == NULL) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_tx_trigger(): failed to allocate req"); |
| freemsg(mp); |
| return (-1); |
| } |
| |
| req->bulk_len = msgdsize(mp); |
| req->bulk_data = mp; |
| req->bulk_client_private = (usb_opaque_t)sc; |
| req->bulk_timeout = RUM_TX_TIMEOUT; |
| req->bulk_attributes = USB_ATTRS_AUTOCLEARING; |
| req->bulk_cb = rum_txeof; |
| req->bulk_exc_cb = rum_txeof; |
| req->bulk_completion_reason = 0; |
| req->bulk_cb_flags = 0; |
| |
| if ((err = usb_pipe_bulk_xfer(sc->sc_tx_pipeh, req, 0)) |
| != USB_SUCCESS) { |
| |
| ral_debug(RAL_DBG_ERR, "rum_tx_trigger(): " |
| "failed to do tx xfer, %d", err); |
| usb_free_bulk_req(req); |
| return (-1); |
| } |
| |
| sc->tx_queued++; |
| |
| return (0); |
| } |
| |
| static int |
| rum_rx_trigger(struct rum_softc *sc) |
| { |
| usb_bulk_req_t *req; |
| int err; |
| |
| req = usb_alloc_bulk_req(sc->sc_dev, RAL_RXBUF_SIZE, USB_FLAGS_SLEEP); |
| if (req == NULL) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_rx_trigger(): failed to allocate req"); |
| return (-1); |
| } |
| |
| req->bulk_len = RAL_RXBUF_SIZE; |
| req->bulk_client_private = (usb_opaque_t)sc; |
| req->bulk_timeout = 0; |
| req->bulk_attributes = USB_ATTRS_SHORT_XFER_OK |
| | USB_ATTRS_AUTOCLEARING; |
| req->bulk_cb = rum_rxeof; |
| req->bulk_exc_cb = rum_rxeof; |
| req->bulk_completion_reason = 0; |
| req->bulk_cb_flags = 0; |
| |
| err = usb_pipe_bulk_xfer(sc->sc_rx_pipeh, req, 0); |
| |
| if (err != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, "rum_rx_trigger(): " |
| "failed to do rx xfer, %d", err); |
| usb_free_bulk_req(req); |
| |
| return (-1); |
| } |
| |
| mutex_enter(&sc->rx_lock); |
| sc->rx_queued++; |
| mutex_exit(&sc->rx_lock); |
| |
| return (0); |
| } |
| |
| static void |
| rum_init_tx_queue(struct rum_softc *sc) |
| { |
| sc->tx_queued = 0; |
| } |
| |
| static int |
| rum_init_rx_queue(struct rum_softc *sc) |
| { |
| int i; |
| |
| sc->rx_queued = 0; |
| |
| for (i = 0; i < RAL_RX_LIST_COUNT; i++) { |
| if (rum_rx_trigger(sc) != 0) { |
| return (USB_FAILURE); |
| } |
| } |
| |
| return (USB_SUCCESS); |
| } |
| |
| static void |
| rum_stop(struct rum_softc *sc) |
| { |
| struct ieee80211com *ic = &sc->sc_ic; |
| uint32_t tmp; |
| |
| ieee80211_new_state(ic, IEEE80211_S_INIT, -1); |
| ieee80211_stop_watchdog(ic); /* stop the watchdog */ |
| |
| RAL_LOCK(sc); |
| |
| sc->sc_tx_timer = 0; |
| sc->sc_flags &= ~RAL_FLAG_RUNNING; /* STOP */ |
| |
| /* disable Rx */ |
| tmp = rum_read(sc, RT2573_TXRX_CSR0); |
| rum_write(sc, RT2573_TXRX_CSR0, tmp | RT2573_DISABLE_RX); |
| |
| /* reset ASIC */ |
| rum_write(sc, RT2573_MAC_CSR1, 3); |
| rum_write(sc, RT2573_MAC_CSR1, 0); |
| |
| rum_close_pipes(sc); |
| |
| RAL_UNLOCK(sc); |
| } |
| |
| static int |
| rum_init(struct rum_softc *sc) |
| { |
| struct ieee80211com *ic = &sc->sc_ic; |
| uint32_t tmp; |
| int i, ntries; |
| |
| rum_stop(sc); |
| |
| /* initialize MAC registers to default values */ |
| for (i = 0; i < RUM_N(rum_def_mac); i++) |
| rum_write(sc, rum_def_mac[i].reg, rum_def_mac[i].val); |
| |
| /* set host ready */ |
| rum_write(sc, RT2573_MAC_CSR1, 3); |
| rum_write(sc, RT2573_MAC_CSR1, 0); |
| |
| /* wait for BBP/RF to wakeup */ |
| for (ntries = 0; ntries < 1000; ntries++) { |
| if (rum_read(sc, RT2573_MAC_CSR12) & 8) |
| break; |
| rum_write(sc, RT2573_MAC_CSR12, 4); /* force wakeup */ |
| drv_usecwait(1000); |
| } |
| if (ntries == 1000) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_init(): timeout waiting for BBP/RF to wakeup\n"); |
| goto fail; |
| } |
| |
| if (rum_bbp_init(sc) != 0) |
| goto fail; |
| |
| /* select default channel */ |
| rum_select_band(sc, ic->ic_curchan); |
| rum_select_antenna(sc); |
| rum_set_chan(sc, ic->ic_curchan); |
| |
| /* clear STA registers */ |
| rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof (sc->sta)); |
| |
| rum_set_macaddr(sc, ic->ic_macaddr); |
| |
| /* initialize ASIC */ |
| rum_write(sc, RT2573_MAC_CSR1, 4); |
| |
| if (rum_open_pipes(sc) != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, "rum_init(): " |
| "could not open pipes.\n"); |
| goto fail; |
| } |
| |
| rum_init_tx_queue(sc); |
| |
| if (rum_init_rx_queue(sc) != USB_SUCCESS) |
| goto fail; |
| |
| /* update Rx filter */ |
| tmp = rum_read(sc, RT2573_TXRX_CSR0) & 0xffff; |
| tmp |= RT2573_DROP_PHY_ERROR | RT2573_DROP_CRC_ERROR; |
| if (ic->ic_opmode != IEEE80211_M_MONITOR) { |
| tmp |= RT2573_DROP_CTL | RT2573_DROP_VER_ERROR | |
| RT2573_DROP_ACKCTS; |
| if (ic->ic_opmode != IEEE80211_M_HOSTAP) |
| tmp |= RT2573_DROP_TODS; |
| if (!(sc->sc_rcr & RAL_RCR_PROMISC)) |
| tmp |= RT2573_DROP_NOT_TO_ME; |
| } |
| |
| rum_write(sc, RT2573_TXRX_CSR0, tmp); |
| sc->sc_flags |= RAL_FLAG_RUNNING; /* RUNNING */ |
| |
| return (DDI_SUCCESS); |
| fail: |
| rum_stop(sc); |
| return (DDI_FAILURE); |
| } |
| |
| static int |
| rum_disconnect(dev_info_t *devinfo) |
| { |
| struct rum_softc *sc; |
| struct ieee80211com *ic; |
| |
| /* |
| * We can't call rum_stop() here, since the hardware is removed, |
| * we can't access the register anymore. |
| */ |
| sc = ddi_get_soft_state(rum_soft_state_p, ddi_get_instance(devinfo)); |
| ASSERT(sc != NULL); |
| |
| if (!RAL_IS_RUNNING(sc)) /* different device or not inited */ |
| return (DDI_SUCCESS); |
| |
| ic = &sc->sc_ic; |
| ieee80211_new_state(ic, IEEE80211_S_INIT, -1); |
| ieee80211_stop_watchdog(ic); /* stop the watchdog */ |
| |
| RAL_LOCK(sc); |
| |
| sc->sc_tx_timer = 0; |
| sc->sc_flags &= ~RAL_FLAG_RUNNING; /* STOP */ |
| |
| rum_close_pipes(sc); |
| |
| RAL_UNLOCK(sc); |
| |
| return (DDI_SUCCESS); |
| } |
| |
| static int |
| rum_reconnect(dev_info_t *devinfo) |
| { |
| struct rum_softc *sc; |
| int err; |
| |
| sc = ddi_get_soft_state(rum_soft_state_p, ddi_get_instance(devinfo)); |
| ASSERT(sc != NULL); |
| |
| /* check device changes after disconnect */ |
| if (usb_check_same_device(sc->sc_dev, NULL, USB_LOG_L2, -1, |
| USB_CHK_BASIC | USB_CHK_CFG, NULL) != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, "different device connected\n"); |
| return (DDI_FAILURE); |
| } |
| |
| err = rum_load_microcode(sc); |
| if (err != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, "could not load 8051 microcode\n"); |
| goto fail; |
| } |
| |
| err = rum_init(sc); |
| fail: |
| return (err); |
| } |
| |
| static void |
| rum_resume(struct rum_softc *sc) |
| { |
| int err; |
| |
| /* check device changes after suspend */ |
| if (usb_check_same_device(sc->sc_dev, NULL, USB_LOG_L2, -1, |
| USB_CHK_BASIC | USB_CHK_CFG, NULL) != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, "no or different device connected\n"); |
| return; |
| } |
| |
| err = rum_load_microcode(sc); |
| if (err != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, "could not load 8051 microcode\n"); |
| return; |
| } |
| |
| (void) rum_init(sc); |
| } |
| |
| #define RUM_AMRR_MIN_SUCCESS_THRESHOLD 1 |
| #define RUM_AMRR_MAX_SUCCESS_THRESHOLD 10 |
| |
| /* |
| * Naive implementation of the Adaptive Multi Rate Retry algorithm: |
| * "IEEE 802.11 Rate Adaptation: A Practical Approach" |
| * Mathieu Lacage, Hossein Manshaei, Thierry Turletti |
| * INRIA Sophia - Projet Planete |
| * http://www-sop.inria.fr/rapports/sophia/RR-5208.html |
| * |
| * This algorithm is particularly well suited for rum since it does not |
| * require per-frame retry statistics. Note however that since h/w does |
| * not provide per-frame stats, we can't do per-node rate adaptation and |
| * thus automatic rate adaptation is only enabled in STA operating mode. |
| */ |
| #define is_success(amrr) \ |
| ((amrr)->retrycnt < (amrr)->txcnt / 10) |
| #define is_failure(amrr) \ |
| ((amrr)->retrycnt > (amrr)->txcnt / 3) |
| #define is_enough(amrr) \ |
| ((amrr)->txcnt > 10) |
| #define is_min_rate(ni) \ |
| ((ni)->in_txrate == 0) |
| #define is_max_rate(ni) \ |
| ((ni)->in_txrate == (ni)->in_rates.ir_nrates - 1) |
| #define increase_rate(ni) \ |
| ((ni)->in_txrate++) |
| #define decrease_rate(ni) \ |
| ((ni)->in_txrate--) |
| #define reset_cnt(amrr) do { \ |
| (amrr)->txcnt = (amrr)->retrycnt = 0; \ |
| _NOTE(CONSTCOND) \ |
| } while (/* CONSTCOND */0) |
| |
| static void |
| rum_ratectl(struct rum_amrr *amrr, struct ieee80211_node *ni) |
| { |
| int need_change = 0; |
| |
| if (is_success(amrr) && is_enough(amrr)) { |
| amrr->success++; |
| if (amrr->success >= amrr->success_threshold && |
| !is_max_rate(ni)) { |
| amrr->recovery = 1; |
| amrr->success = 0; |
| increase_rate(ni); |
| need_change = 1; |
| } else { |
| amrr->recovery = 0; |
| } |
| } else if (is_failure(amrr)) { |
| amrr->success = 0; |
| if (!is_min_rate(ni)) { |
| if (amrr->recovery) { |
| amrr->success_threshold *= 2; |
| if (amrr->success_threshold > |
| RUM_AMRR_MAX_SUCCESS_THRESHOLD) |
| amrr->success_threshold = |
| RUM_AMRR_MAX_SUCCESS_THRESHOLD; |
| } else { |
| amrr->success_threshold = |
| RUM_AMRR_MIN_SUCCESS_THRESHOLD; |
| } |
| decrease_rate(ni); |
| need_change = 1; |
| } |
| amrr->recovery = 0; /* original paper was incorrect */ |
| } |
| |
| if (is_enough(amrr) || need_change) |
| reset_cnt(amrr); |
| } |
| |
| static void |
| rum_amrr_timeout(void *arg) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| struct rum_amrr *amrr = &sc->amrr; |
| |
| rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof (sc->sta)); |
| |
| /* count TX retry-fail as Tx errors */ |
| sc->sc_tx_err += LE_32(sc->sta[5]) >> 16; |
| sc->sc_tx_retries += ((LE_32(sc->sta[4]) >> 16) + |
| (LE_32(sc->sta[5]) & 0xffff)); |
| |
| amrr->retrycnt = |
| (LE_32(sc->sta[4]) >> 16) + /* TX one-retry ok count */ |
| (LE_32(sc->sta[5]) & 0xffff) + /* TX more-retry ok count */ |
| (LE_32(sc->sta[5]) >> 16); /* TX retry-fail count */ |
| |
| amrr->txcnt = |
| amrr->retrycnt + |
| (LE_32(sc->sta[4]) & 0xffff); /* TX no-retry ok count */ |
| |
| rum_ratectl(amrr, sc->sc_ic.ic_bss); |
| |
| sc->sc_amrr_id = timeout(rum_amrr_timeout, (void *)sc, |
| drv_usectohz(1000 * 1000)); /* 1 second */ |
| } |
| |
| static void |
| rum_amrr_start(struct rum_softc *sc, struct ieee80211_node *ni) |
| { |
| struct rum_amrr *amrr = &sc->amrr; |
| int i; |
| |
| /* clear statistic registers (STA_CSR0 to STA_CSR5) */ |
| rum_read_multi(sc, RT2573_STA_CSR0, sc->sta, sizeof (sc->sta)); |
| |
| amrr->success = 0; |
| amrr->recovery = 0; |
| amrr->txcnt = amrr->retrycnt = 0; |
| amrr->success_threshold = RUM_AMRR_MIN_SUCCESS_THRESHOLD; |
| |
| /* set rate to some reasonable initial value */ |
| for (i = ni->in_rates.ir_nrates - 1; |
| i > 0 && (ni->in_rates.ir_rates[i] & IEEE80211_RATE_VAL) > 72; |
| i--) { |
| } |
| |
| ni->in_txrate = i; |
| |
| sc->sc_amrr_id = timeout(rum_amrr_timeout, (void *)sc, |
| drv_usectohz(1000 * 1000)); /* 1 second */ |
| } |
| |
| void |
| rum_watchdog(void *arg) |
| { |
| struct rum_softc *sc = arg; |
| struct ieee80211com *ic = &sc->sc_ic; |
| int ntimer = 0; |
| |
| RAL_LOCK(sc); |
| ic->ic_watchdog_timer = 0; |
| |
| if (!RAL_IS_RUNNING(sc)) { |
| RAL_UNLOCK(sc); |
| return; |
| } |
| |
| if (sc->sc_tx_timer > 0) { |
| if (--sc->sc_tx_timer == 0) { |
| ral_debug(RAL_DBG_ERR, "tx timer timeout\n"); |
| RAL_UNLOCK(sc); |
| (void) rum_init(sc); |
| (void) ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); |
| return; |
| } |
| } |
| |
| if (ic->ic_state == IEEE80211_S_RUN) |
| ntimer = 1; |
| |
| RAL_UNLOCK(sc); |
| |
| ieee80211_watchdog(ic); |
| |
| if (ntimer) |
| ieee80211_start_watchdog(ic, ntimer); |
| } |
| |
| static int |
| rum_m_start(void *arg) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| int err; |
| |
| /* |
| * initialize RT2501USB hardware |
| */ |
| err = rum_init(sc); |
| if (err != DDI_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, "device configuration failed\n"); |
| goto fail; |
| } |
| sc->sc_flags |= RAL_FLAG_RUNNING; /* RUNNING */ |
| return (err); |
| |
| fail: |
| rum_stop(sc); |
| return (err); |
| } |
| |
| static void |
| rum_m_stop(void *arg) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| |
| (void) rum_stop(sc); |
| sc->sc_flags &= ~RAL_FLAG_RUNNING; /* STOP */ |
| } |
| |
| static int |
| rum_m_unicst(void *arg, const uint8_t *macaddr) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| struct ieee80211com *ic = &sc->sc_ic; |
| |
| ral_debug(RAL_DBG_MSG, "rum_m_unicst(): " MACSTR "\n", |
| MAC2STR(macaddr)); |
| |
| IEEE80211_ADDR_COPY(ic->ic_macaddr, macaddr); |
| (void) rum_set_macaddr(sc, (uint8_t *)macaddr); |
| (void) rum_init(sc); |
| |
| return (0); |
| } |
| |
| /*ARGSUSED*/ |
| static int |
| rum_m_multicst(void *arg, boolean_t add, const uint8_t *mca) |
| { |
| return (0); |
| } |
| |
| static int |
| rum_m_promisc(void *arg, boolean_t on) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| |
| if (on) { |
| sc->sc_rcr |= RAL_RCR_PROMISC; |
| sc->sc_rcr |= RAL_RCR_MULTI; |
| } else { |
| sc->sc_rcr &= ~RAL_RCR_PROMISC; |
| sc->sc_rcr &= ~RAL_RCR_MULTI; |
| } |
| |
| rum_update_promisc(sc); |
| return (0); |
| } |
| |
| /* |
| * callback functions for /get/set properties |
| */ |
| static int |
| rum_m_setprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, |
| uint_t wldp_length, const void *wldp_buf) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| struct ieee80211com *ic = &sc->sc_ic; |
| int err; |
| |
| err = ieee80211_setprop(ic, pr_name, wldp_pr_num, |
| wldp_length, wldp_buf); |
| RAL_LOCK(sc); |
| if (err == ENETRESET) { |
| if (RAL_IS_RUNNING(sc)) { |
| RAL_UNLOCK(sc); |
| (void) rum_init(sc); |
| (void) ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); |
| RAL_LOCK(sc); |
| } |
| err = 0; |
| } |
| RAL_UNLOCK(sc); |
| |
| return (err); |
| } |
| |
| static int |
| rum_m_getprop(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, |
| uint_t wldp_length, void *wldp_buf) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| int err; |
| |
| err = ieee80211_getprop(&sc->sc_ic, pr_name, wldp_pr_num, |
| wldp_length, wldp_buf); |
| |
| return (err); |
| } |
| |
| static void |
| rum_m_propinfo(void *arg, const char *pr_name, mac_prop_id_t wldp_pr_num, |
| mac_prop_info_handle_t prh) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| |
| ieee80211_propinfo(&sc->sc_ic, pr_name, wldp_pr_num, prh); |
| } |
| |
| static void |
| rum_m_ioctl(void* arg, queue_t *wq, mblk_t *mp) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| struct ieee80211com *ic = &sc->sc_ic; |
| int err; |
| |
| err = ieee80211_ioctl(ic, wq, mp); |
| RAL_LOCK(sc); |
| if (err == ENETRESET) { |
| if (RAL_IS_RUNNING(sc)) { |
| RAL_UNLOCK(sc); |
| (void) rum_init(sc); |
| (void) ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); |
| RAL_LOCK(sc); |
| } |
| } |
| RAL_UNLOCK(sc); |
| } |
| |
| static int |
| rum_m_stat(void *arg, uint_t stat, uint64_t *val) |
| { |
| struct rum_softc *sc = (struct rum_softc *)arg; |
| ieee80211com_t *ic = &sc->sc_ic; |
| ieee80211_node_t *ni; |
| struct ieee80211_rateset *rs; |
| |
| RAL_LOCK(sc); |
| |
| ni = ic->ic_bss; |
| rs = &ni->in_rates; |
| |
| switch (stat) { |
| case MAC_STAT_IFSPEED: |
| *val = ((ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE) ? |
| (rs->ir_rates[ni->in_txrate] & IEEE80211_RATE_VAL) |
| : ic->ic_fixed_rate) * 500000ull; |
| break; |
| case MAC_STAT_NOXMTBUF: |
| *val = sc->sc_tx_nobuf; |
| break; |
| case MAC_STAT_NORCVBUF: |
| *val = sc->sc_rx_nobuf; |
| break; |
| case MAC_STAT_IERRORS: |
| *val = sc->sc_rx_err; |
| break; |
| case MAC_STAT_RBYTES: |
| *val = ic->ic_stats.is_rx_bytes; |
| break; |
| case MAC_STAT_IPACKETS: |
| *val = ic->ic_stats.is_rx_frags; |
| break; |
| case MAC_STAT_OBYTES: |
| *val = ic->ic_stats.is_tx_bytes; |
| break; |
| case MAC_STAT_OPACKETS: |
| *val = ic->ic_stats.is_tx_frags; |
| break; |
| case MAC_STAT_OERRORS: |
| case WIFI_STAT_TX_FAILED: |
| *val = sc->sc_tx_err; |
| break; |
| case WIFI_STAT_TX_RETRANS: |
| *val = sc->sc_tx_retries; |
| break; |
| case WIFI_STAT_FCS_ERRORS: |
| case WIFI_STAT_WEP_ERRORS: |
| case WIFI_STAT_TX_FRAGS: |
| case WIFI_STAT_MCAST_TX: |
| case WIFI_STAT_RTS_SUCCESS: |
| case WIFI_STAT_RTS_FAILURE: |
| case WIFI_STAT_ACK_FAILURE: |
| case WIFI_STAT_RX_FRAGS: |
| case WIFI_STAT_MCAST_RX: |
| case WIFI_STAT_RX_DUPS: |
| RAL_UNLOCK(sc); |
| return (ieee80211_stat(ic, stat, val)); |
| default: |
| RAL_UNLOCK(sc); |
| return (ENOTSUP); |
| } |
| RAL_UNLOCK(sc); |
| |
| return (0); |
| } |
| |
| static int |
| rum_attach(dev_info_t *devinfo, ddi_attach_cmd_t cmd) |
| { |
| struct rum_softc *sc; |
| struct ieee80211com *ic; |
| int err, i, ntries; |
| uint32_t tmp; |
| int instance; |
| |
| char strbuf[32]; |
| |
| wifi_data_t wd = { 0 }; |
| mac_register_t *macp; |
| |
| switch (cmd) { |
| case DDI_ATTACH: |
| break; |
| case DDI_RESUME: |
| sc = ddi_get_soft_state(rum_soft_state_p, |
| ddi_get_instance(devinfo)); |
| ASSERT(sc != NULL); |
| rum_resume(sc); |
| return (DDI_SUCCESS); |
| default: |
| return (DDI_FAILURE); |
| } |
| |
| instance = ddi_get_instance(devinfo); |
| |
| if (ddi_soft_state_zalloc(rum_soft_state_p, instance) != DDI_SUCCESS) { |
| ral_debug(RAL_DBG_MSG, "rum_attach(): " |
| "unable to alloc soft_state_p\n"); |
| return (DDI_FAILURE); |
| } |
| |
| sc = ddi_get_soft_state(rum_soft_state_p, instance); |
| ic = (ieee80211com_t *)&sc->sc_ic; |
| sc->sc_dev = devinfo; |
| |
| if (usb_client_attach(devinfo, USBDRV_VERSION, 0) != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_attach(): usb_client_attach failed\n"); |
| goto fail1; |
| } |
| |
| if (usb_get_dev_data(devinfo, &sc->sc_udev, |
| USB_PARSE_LVL_ALL, 0) != USB_SUCCESS) { |
| sc->sc_udev = NULL; |
| goto fail2; |
| } |
| |
| mutex_init(&sc->sc_genlock, NULL, MUTEX_DRIVER, NULL); |
| mutex_init(&sc->tx_lock, NULL, MUTEX_DRIVER, NULL); |
| mutex_init(&sc->rx_lock, NULL, MUTEX_DRIVER, NULL); |
| |
| /* retrieve RT2573 rev. no */ |
| for (ntries = 0; ntries < 1000; ntries++) { |
| if ((tmp = rum_read(sc, RT2573_MAC_CSR0)) != 0) |
| break; |
| drv_usecwait(1000); |
| } |
| if (ntries == 1000) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_attach(): timeout waiting for chip to settle\n"); |
| goto fail3; |
| } |
| |
| /* retrieve MAC address and various other things from EEPROM */ |
| rum_read_eeprom(sc); |
| |
| ral_debug(RAL_DBG_MSG, "rum: MAC/BBP RT2573 (rev 0x%05x), RF %s\n", |
| tmp, rum_get_rf(sc->rf_rev)); |
| |
| err = rum_load_microcode(sc); |
| if (err != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, "could not load 8051 microcode\n"); |
| goto fail3; |
| } |
| |
| ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ |
| ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ |
| ic->ic_state = IEEE80211_S_INIT; |
| |
| ic->ic_maxrssi = 63; |
| ic->ic_set_shortslot = rum_update_slot; |
| ic->ic_xmit = rum_send; |
| |
| /* set device capabilities */ |
| ic->ic_caps = |
| IEEE80211_C_TXPMGT | /* tx power management */ |
| IEEE80211_C_SHPREAMBLE | /* short preamble supported */ |
| IEEE80211_C_SHSLOT; /* short slot time supported */ |
| |
| ic->ic_caps |= IEEE80211_C_WPA; /* Support WPA/WPA2 */ |
| |
| #define IEEE80211_CHAN_A \ |
| (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) |
| |
| if (sc->rf_rev == RT2573_RF_5225 || sc->rf_rev == RT2573_RF_5226) { |
| /* set supported .11a rates */ |
| ic->ic_sup_rates[IEEE80211_MODE_11A] = rum_rateset_11a; |
| |
| /* set supported .11a channels */ |
| for (i = 34; i <= 46; i += 4) { |
| ic->ic_sup_channels[i].ich_freq = |
| ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); |
| ic->ic_sup_channels[i].ich_flags = IEEE80211_CHAN_A; |
| } |
| for (i = 36; i <= 64; i += 4) { |
| ic->ic_sup_channels[i].ich_freq = |
| ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); |
| ic->ic_sup_channels[i].ich_flags = IEEE80211_CHAN_A; |
| } |
| for (i = 100; i <= 140; i += 4) { |
| ic->ic_sup_channels[i].ich_freq = |
| ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); |
| ic->ic_sup_channels[i].ich_flags = IEEE80211_CHAN_A; |
| } |
| for (i = 149; i <= 165; i += 4) { |
| ic->ic_sup_channels[i].ich_freq = |
| ieee80211_ieee2mhz(i, IEEE80211_CHAN_5GHZ); |
| ic->ic_sup_channels[i].ich_flags = IEEE80211_CHAN_A; |
| } |
| } |
| |
| /* set supported .11b and .11g rates */ |
| ic->ic_sup_rates[IEEE80211_MODE_11B] = rum_rateset_11b; |
| ic->ic_sup_rates[IEEE80211_MODE_11G] = rum_rateset_11g; |
| |
| /* set supported .11b and .11g channels (1 through 14) */ |
| for (i = 1; i <= 14; i++) { |
| ic->ic_sup_channels[i].ich_freq = |
| ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ); |
| ic->ic_sup_channels[i].ich_flags = |
| IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | |
| IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ; |
| } |
| |
| ieee80211_attach(ic); |
| |
| /* register WPA door */ |
| ieee80211_register_door(ic, ddi_driver_name(devinfo), |
| ddi_get_instance(devinfo)); |
| |
| /* override state transition machine */ |
| sc->sc_newstate = ic->ic_newstate; |
| ic->ic_newstate = rum_newstate; |
| ic->ic_watchdog = rum_watchdog; |
| ieee80211_media_init(ic); |
| ic->ic_def_txkey = 0; |
| |
| sc->sc_rcr = 0; |
| sc->dwelltime = 300; |
| sc->sc_flags = 0; |
| |
| /* |
| * Provide initial settings for the WiFi plugin; whenever this |
| * information changes, we need to call mac_plugindata_update() |
| */ |
| wd.wd_opmode = ic->ic_opmode; |
| wd.wd_secalloc = WIFI_SEC_NONE; |
| IEEE80211_ADDR_COPY(wd.wd_bssid, ic->ic_bss->in_bssid); |
| |
| if ((macp = mac_alloc(MAC_VERSION)) == NULL) { |
| ral_debug(RAL_DBG_ERR, "rum_attach(): " |
| "MAC version mismatch\n"); |
| goto fail3; |
| } |
| |
| macp->m_type_ident = MAC_PLUGIN_IDENT_WIFI; |
| macp->m_driver = sc; |
| macp->m_dip = devinfo; |
| macp->m_src_addr = ic->ic_macaddr; |
| macp->m_callbacks = &rum_m_callbacks; |
| macp->m_min_sdu = 0; |
| macp->m_max_sdu = IEEE80211_MTU; |
| macp->m_pdata = &wd; |
| macp->m_pdata_size = sizeof (wd); |
| |
| err = mac_register(macp, &ic->ic_mach); |
| mac_free(macp); |
| if (err != 0) { |
| ral_debug(RAL_DBG_ERR, "rum_attach(): " |
| "mac_register() err %x\n", err); |
| goto fail3; |
| } |
| |
| if (usb_register_hotplug_cbs(devinfo, rum_disconnect, |
| rum_reconnect) != USB_SUCCESS) { |
| ral_debug(RAL_DBG_ERR, |
| "rum_attach() failed to register events"); |
| goto fail4; |
| } |
| |
| /* |
| * Create minor node of type DDI_NT_NET_WIFI |
| */ |
| (void) snprintf(strbuf, sizeof (strbuf), "%s%d", |
| "rum", instance); |
| err = ddi_create_minor_node(devinfo, strbuf, S_IFCHR, |
| instance + 1, DDI_NT_NET_WIFI, 0); |
| |
| if (err != DDI_SUCCESS) |
| ral_debug(RAL_DBG_ERR, "ddi_create_minor_node() failed\n"); |
| |
| /* |
| * Notify link is down now |
| */ |
| mac_link_update(ic->ic_mach, LINK_STATE_DOWN); |
| return (DDI_SUCCESS); |
| |
| fail4: |
| (void) mac_unregister(ic->ic_mach); |
| fail3: |
| mutex_destroy(&sc->sc_genlock); |
| mutex_destroy(&sc->tx_lock); |
| mutex_destroy(&sc->rx_lock); |
| fail2: |
| usb_client_detach(sc->sc_dev, sc->sc_udev); |
| fail1: |
| ddi_soft_state_free(rum_soft_state_p, ddi_get_instance(devinfo)); |
| |
| return (DDI_FAILURE); |
| } |
| |
| static int |
| rum_detach(dev_info_t *devinfo, ddi_detach_cmd_t cmd) |
| { |
| struct rum_softc *sc; |
| |
| sc = ddi_get_soft_state(rum_soft_state_p, ddi_get_instance(devinfo)); |
| ASSERT(sc != NULL); |
| |
| switch (cmd) { |
| case DDI_DETACH: |
| break; |
| case DDI_SUSPEND: |
| if (RAL_IS_RUNNING(sc)) |
| (void) rum_stop(sc); |
| return (DDI_SUCCESS); |
| default: |
| return (DDI_FAILURE); |
| } |
| |
| rum_stop(sc); |
| usb_unregister_hotplug_cbs(devinfo); |
| |
| /* |
| * Unregister from the MAC layer subsystem |
| */ |
| if (mac_unregister(sc->sc_ic.ic_mach) != 0) |
| return (DDI_FAILURE); |
| |
| /* |
| * detach ieee80211 layer |
| */ |
| ieee80211_detach(&sc->sc_ic); |
| |
| mutex_destroy(&sc->sc_genlock); |
| mutex_destroy(&sc->tx_lock); |
| mutex_destroy(&sc->rx_lock); |
| |
| /* pipes will be closed in rum_stop() */ |
| usb_client_detach(devinfo, sc->sc_udev); |
| sc->sc_udev = NULL; |
| |
| ddi_remove_minor_node(devinfo, NULL); |
| ddi_soft_state_free(rum_soft_state_p, ddi_get_instance(devinfo)); |
| |
| return (DDI_SUCCESS); |
| } |
| |
| int |
| _info(struct modinfo *modinfop) |
| { |
| return (mod_info(&modlinkage, modinfop)); |
| } |
| |
| int |
| _init(void) |
| { |
| int status; |
| |
| status = ddi_soft_state_init(&rum_soft_state_p, |
| sizeof (struct rum_softc), 1); |
| if (status != 0) |
| return (status); |
| |
| mac_init_ops(&rum_dev_ops, "rum"); |
| status = mod_install(&modlinkage); |
| if (status != 0) { |
| mac_fini_ops(&rum_dev_ops); |
| ddi_soft_state_fini(&rum_soft_state_p); |
| } |
| return (status); |
| } |
| |
| int |
| _fini(void) |
| { |
| int status; |
| |
| status = mod_remove(&modlinkage); |
| if (status == 0) { |
| mac_fini_ops(&rum_dev_ops); |
| ddi_soft_state_fini(&rum_soft_state_p); |
| } |
| return (status); |
| } |