| # |
| # This file is provided under a CDDLv1 license. When using or |
| # redistributing this file, you may do so under this license. |
| # In redistributing this file this license must be included |
| # and no other modification of this header file is permitted. |
| # |
| # CDDL LICENSE SUMMARY |
| # |
| # Copyright(c) 1999 - 2009 Intel Corporation. All rights reserved. |
| # |
| # The contents of this file are subject to the terms of Version |
| # 1.0 of the Common Development and Distribution License (the "License"). |
| # |
| # You should have received a copy of the License with this software. |
| # You can obtain a copy of the License at |
| # http://www.opensolaris.org/os/licensing. |
| # See the License for the specific language governing permissions |
| # and limitations under the License. |
| # |
| # Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved. |
| # |
| # |
| |
| |
| |
| 4.0.4 code drop from Intel on 1/30/2003 |
| ======================================= |
| This version is used as the base for putback into both s10 and |
| s9u4. |
| |
| Following changes were done to this code base before putting |
| back into solaris trees (S10 & S9U4): |
| |
| 1) Changes to e1000_hw.c to remove build warnings |
| |
| + diff /home/naroori/grizzly/sources/e1000g/1_4.0.4/e1000_hw.c . |
| 2616c2616 |
| < phy_info->downshift = hw->speed_downgraded; |
| --- |
| > phy_info->downshift = (int)hw->speed_downgraded; |
| 2684c2684 |
| < phy_info->downshift = hw->speed_downgraded; |
| --- |
| > phy_info->downshift = (int)hw->speed_downgraded; |
| |
| 2) Changes to e1000g_dlpi.c for ipv6 plumbing problem and |
| problem with default MTU size of 2024. |
| |
| + diff /home/naroori/grizzly/sources/e1000g/1_4.0.4/e1000g_dlpi.c . |
| 313a314 |
| > /* the following causes problem with ipv6 plumbing... |
| 314a316 |
| > */ |
| 628c630,632 |
| < if (Adapter->Shared.max_frame_size == FRAME_SIZE_UPTO_16K) |
| --- |
| > if (Adapter->Shared.max_frame_size == ETHERMTU) { |
| > } |
| > else if (Adapter->Shared.max_frame_size == FRAME_SIZE_UPTO_16K) { |
| 630c634,635 |
| < else |
| --- |
| > } |
| > else { |
| 631a637 |
| > } |
| |
| 3) Changes to e1000g_main.c for version string modification, |
| removing console messages on bootup and problems with default |
| MTU size of 2024. |
| |
| + diff /home/naroori/grizzly/sources/e1000g/1_4.0.4/e1000g_main.c . |
| 59c59 |
| < static char e1000g_version[]="Driver Ver. 4.0.4-beta"; |
| --- |
| > static char e1000g_version[]="Driver Ver. 4.0.4"; |
| 937c937 |
| < e1000g_log(Adapter,CE_CONT,"\n%s, %s\n",AdapterName,e1000g_version); |
| --- |
| > cmn_err(CE_CONT,"!%s, %s\n",AdapterName,e1000g_version); |
| 3000c3000 |
| < Adapter->Shared.max_frame_size = FRAME_SIZE_UPTO_2K; |
| --- |
| > Adapter->Shared.max_frame_size = ETHERMTU; |
| 3013c3013 |
| < Adapter->Shared.max_frame_size = FRAME_SIZE_UPTO_2K; |
| --- |
| > Adapter->Shared.max_frame_size = ETHERMTU; |
| |
| |
| |
| Bug fixes to 4.0.4: |
| =================== |
| 1) bug#4829398 code cleanup for ethernet bootup messages |
| |
| |
| 4.0.12 code drop from Intel on 3/18/2003 |
| ======================================== |
| |
| This drop had extensive changes from 4.0.4. Many changes after |
| 4.0.4 were realted to new hardware (a.k.a. BayCity chipset), |
| not relevant to Grizzly.After looking at the changelog from Intel, |
| we decided not to do a putback but rather take only high priority |
| fixes from this drop and generate a new version 4.0.4.1. |
| |
| Here is the changelog supplied by Intel for this drop: |
| |
| ________________________________________________________________________ |
| Component Name: Unix-Solaris_8254x_BayCity_Intel |
| Description: Bay City software component for gigabit products |
| ________________________________________________________________________ |
| |
| |
| ---Version: 4.0.13 Date: 3/14/2003 5:00:00 PM--- |
| Added transmit mutex locking to the 82547 workaround code. |
| |
| ---Version: 4.0.12 Date: 3/10/2003 8:01:00 PM--- |
| Added new shared code with LED link speed fix |
| |
| ---Version: 4.0.11 Date: 3/7/2003 5:57:00 PM--- |
| Updated the Tanacross FIFO hang workaround to reset FIFO pointers instead of sending autonomous packets. |
| |
| ---Version: 4.0.10 Date: 3/4/2003 2:39:00 PM--- |
| Removed an extra sdu adjustment that was left in by accident |
| |
| ---Version: 4.0.9 Date: 3/4/2003 11:13:00 AM--- |
| Removed the first call to adapter_stop. This was called before the HW struct was properly initialized, and could cause hangs. |
| |
| Changed reported ethernet sdu from 2024 to 1500, as driver could be configured for invalid frame MTU sizes in Solaris 9. |
| |
| Added Tanacross workaround for FIFO hang. |
| |
| ---Version: 4.0.8 Date: 2/25/2003 2:27:00 PM--- |
| Shared code update including Phy init script. |
| Smartspeed workaround added. e1000g_smartspeed called from LocalTimer function every two seconds when link is down. |
| |
| ---Version: 4.0.7 Date: 2/18/2003 11:41:00 AM--- |
| Updated to include bug fixes from the shared code. |
| |
| ---Version: 4.0.5 Date: 1/31/2003 10:13:00 AM--- |
| Support for new hardware changes |
| Removed the extra ack sent at the end of the attach_req routine. This extra ack previously made IPv6 plumbing on Solaris 9 fail. |
| |
| |
| 4.0.4.1 |
| ======= |
| This version is not an Intel drop but 4.0.4 merged with two |
| high priority fixes from 4.0.12. We will give back the 4.0.4.1 |
| driver back to Intel, per their request, so they have the exact |
| code that we are releasing through Solaris. |
| |
| The following are the two fixes selected for inclusion from |
| 4.0.12 codebase: |
| |
| 1) Removing the first call to adapter_stop as discussed in |
| 4.0.12 changelog. |
| |
| 2) Corrections to MTU size calculations first introduced |
| in our 4.0.4 putback to bring them into sync with 4.0.12 |
| MTU size calculations. |
| |
| We also added README file (current file you are reading) during |
| this putback. |
| |
| 4.0.4.2 |
| ======= |
| This version has the following fixes: |
| |
| 1) bug#4857098: e1000g driver assumes another intel card as its own. |
| The fix involved eliminating 1009, 1012, 1015, 1016, 1017 |
| device-ids from e1000g nodelist so that they do not conflict |
| with iprb's subsystem-ids. |
| |
| This fix has to be reverted later once we have a proper fix for |
| bug#4859426. |
| |
| 2) bug#4853683: e1000g lacks a large number of expected kstats |
| The fix involved three steps: a) Renaming some of the existing |
| kstats to comply with WDD documentation b) Computing some of |
| those which are not being tracked c) Supplying zero for the rest |
| the error stats which are not being tracked. |
| |
| This fix has to be revisited to improvise the statistics in |
| future. |
| |
| 3) bug#4862529: System panics during configuring devices on a Dell 4-way |
| servers. The fix involved removing all the devic-ids from nodelist |
| except for 1010. This means that we support now only the grizzly |
| on-board gigabit chipset and "Intel Pro/1000 MT Dual Server Adapter". |
| |
| This fix has to be reverted later once we have a proper fix for |
| bug#4859426. |
| |
| 4.0.4.3 |
| ======= |
| This version has the following fixes: |
| |
| 1) bug#4874857: ipv6 ping fails on bootup for e1000g. |
| The fix involved implementing multicast tables both at per stream |
| level and per device level. |
| |
| 2) bug#4875743: null pointer dereference in ddi_dma_addr_bind_handle. |
| The fix involved adding LastTxDescriptorBuf to struct e1000g and |
| handling consequent proper calculations for LastTxDescriptor. |
| |
| 3) bug#4882541: setting up ethernet address causes machine to panic. |
| The fix involved removing a spurious log message which was causing |
| the panic. |
| |
| 4) bug#4883302: Reinstate the removed device-ids - phase 2. |
| The fix involved some chip initializations to handle 1000 id. |
| |
| 5) bug#4919285: device id 8086,100e needs to be added |
| The fix needed for the Intel Precision 350 workstation |
| |
| 4.2.11 |
| ====== |
| |
| We need to sync up with the latest Intel code base for e1000g driver. |
| |
| Intel is currently at version 4.2.11 while we are on 4.0.4 branch. |
| The exact version under 4.0.4 branch is 4.0.4.3. Since we are on |
| the branch while Intel is working on the main trunk, we have had |
| lot of friction in getting timely fixes from Intel. The current |
| syncing up with their main trunk lets us a smooth migration path. |
| |
| The new code base also would provide us with support for additional |
| cards including Quad port cards (See bugs: 4921433, 4914460). |
| In our old 4.0.4 branch, we had to drop support for a lot of cards |
| for various problems; with the current syncing up, we would be able |
| to support so many various cards except for the cards clashing with |
| iprb driver. |
| |
| The new code base also has support for additional new chipsets. The code |
| base also benefits from any fixes to the shared code base with other |
| operating system drivers. |
| |
| The new codebase also has lot of cleanups in terms of various #ifdefs |
| and should be much simpler to maintain. |
| |
| So the list of actual ids take out are: |
| 1009 |
| 1012 |
| 1013 |
| 1015 |
| 1016 |
| 1017 |
| |
| 4.2.15 |
| ====== |
| This intel code drop addresses the following bug: |
| |
| 4909863: Bad trap panic in e1000g_rtn_buf |
| |
| 4.2.16 |
| ====== |
| This version has the following fix: |
| 4932422 interconnect remains faulted after adapter disconnected and then reconnected |
| |
| Notes on packaging: |
| =================== |
| Intel names the package as INTCGigaE while we chose to rename |
| it as SUNWintgige as per Sun packaging conventions. |
| |
| 4.2.17 |
| ====== |
| This version has the following fixes: |
| 4971416 e1000g seems to hang system when no network connected |
| 4997067 e1000gattach panicks when the going gets tough |
| 4990064 e1000g leaks memory when it runs out of transmit descriptors |
| |
| 4.2.17.1 |
| ====== |
| This version has the following fix: |
| 5014625 e1000g driver panicked when snoop(1M) exited |
| |
| 4.2.17.2 |
| ====== |
| This version has the following fix: |
| 4940870 e1000g: Dependence on instance initialization order disables .conf properties |
| 5033616 e1000g panicked after rem_drv while some service still binds to the driver |
| 5037062 strings have crept back in e1000g/adpu320 related mutex_init()s |
| 5050268 Some e1000g flag operations are not correct. |
| |
| 4.2.17.3 |
| ====== |
| This version has the following fix: |
| 5067162 e1000g cannot transmit heavy UDP |
| |
| 4.2.17.4 |
| ====== |
| This version has the following fix: |
| 5010052 The stress load/unload test of Intel PWLA8494MT Quad Port NIC causes system hung |
| 5050265 E1000g does not support IPV6 fast path. This will impact IPV6 performance. |
| 5050369 E1000g locks the system if plumb/unplumb under heavy workload and snoop. |
| 5050415 E1000g will accepts ethernet packets which are not addressed to it. |
| 5055132 E1000g crashes when injected with Jumbo Frame packets. |
| |
| 4.2.17.5 |
| ====== |
| This version has the following fix: |
| 6175307 system crash with memory size of 11GB |
| 6176031 the sequence of releasing resource error in e1000gattach |
| 6180180 PktAlloc - Could not bind rbuf packet as single frag. Count - 2 |
| 6185022 Port hang when unplumb interface under heavy traffic |
| |
| 4.2.17.6 |
| ====== |
| This version has the following fix: |
| 6196426 e1000g should support NICs that use the internal serdes for external connectivity |
| |
| 4.2.17.7 |
| ====== |
| This version has the following fix: |
| 4921433 e1000g: Should not probe by using VID/DID table to identify adapters |
| |
| 4.2.17.8 |
| ====== |
| This version has the following fix: |
| 6213101 64bit DMA max address space should be supported by e1000g driver |
| 6215261 e1000g driver 211% slower in AMD64 than 32 bit e1000g driver (S10_73, Single CPU V20z) |
| |
| 4.2.17.9 |
| ====== |
| This version has the following fix: |
| 6256212 fix for 6213101 breaks e1000g for 32-bit kernels on machines with >4GB of physical memory |
| |
| 4.2.17.10 |
| ====== |
| This version has the following fix: |
| 6203602 e1000g needs to support the Intel PCI-E card |
| 6217046 we need to merge the Intel code (version 4.2.28) into e1000g |
| |
| 5.0.0 |
| ====== |
| This version has the following fix: |
| PSARC/2005/470 E1000g Nemo Migration |
| 6221079 e1000g driver interface conversion from DLPI to GLD3.0(nemo) |
| 6224901 e1000g fails to configure VLANs on a Sun v65x |
| 6286414 snmp: ifOperStatus for e1000g driver doesn't change when cable is unplugged. |
| 6238486 e1000g: poor performance in web server benchmark, high CPU utilization noted |
| 6293265 e1000g_intr doesn't use mutex at all |
| 6304657 e1000g_PktAlloc_buffers() causes a panic when ddi_dma_addr_bind_handle() fails. |
| 4913292 e1000g: does not support PSARC 2003/264 Extended IP cksum_offload |
| 5071610 e1000g can't send any packets after a jumbo-packet forwarding test. |
| 5082975 in Jumbo enable mode, netperf indicates a lower throughput, compared to Jumbo of |
| 5085394 e1000g driver hangs system during 64byte stress testing |
| 6174349 netlb support needed for Solaris e1000g driver |
| 6207682 e1000g needs link up/down support |
| 6211068 e1000g has some input error packets during stress test |
| 6212810 e1000g caught sending unsolicited M_PROTO/M_PCPROTO messages |
| 6219298 warnings about "inconsistent getinfo(9E) implementation" |
| 6226217 e1000g should support trunking |
| 6239279 Network stess test fail on 82545GM chip on IBM Blade HS40 |
| 6242612 e1000g needs to support SPARC |
| 6247936 In e1000g transmission, ddi_dma_addr_bind_handle() returns more cookies than speficied |
| 6273730 e1000g causes memory leaks within Freelist_alloc and PktAlloc_buffers |
| 5073739 find some memory leaks after load_unload test |
| 6287250 e1000g may need to use new Intel-recommended semaphore mechanism |
| |
| 5.0.1 |
| ====== |
| This version has the following fix: |
| 6313609 2-port Intel NIC (part# 370-6687) performs poorly compared to 1-port Intel NIC (part# 370-6685) |
| 6315002 gcc and e1000g don't get along |
| |
| 5.0.2 |
| ====== |
| This version has the following fix: |
| 6319100 Tier0 Ontario machine does not boot net with sparc e1000g driver substitution for sparc ipge driver |
| |
| 5.0.3 |
| ====== |
| This version has the following fix: |
| 6327693 e1000g should use MSIs when possible |
| 6333461 panic[cpu0]/thread=d63f4de0: assertion failed: !dma->dp_inuse, file: ../../i86pc/io/rootnex.c |
| |
| 5.0.4 |
| ====== |
| This version has the following fix: |
| 6351378 e1000g panic seen after bfu'ing latest onnv nightly |
| |
| 5.0.5 |
| ====== |
| This version has the following fix: |
| 6303973 System hard hangs when sharing interrupts (in PIC) mode |
| 6323732 e1000g reports incorrect packet statistics |
| 6333880 Customer is requesting driver for a newIntel 82573 NIC |
| 6336163 netlb support needed for Solaris (sparc) e1000g driver |
| 6339377 e1000g.conf needs to be simplified |
| 6350407 e1000 card in Gateway E2300 does not actually send packets in S10U1 |
| 6364052 e1000g driver should provide interface to ndd utility |
| 6367490 e1000g has problem in deliver UDP fragment with addin card |
| |
| 5.0.6 |
| ====== |
| This version has the following fix: |
| 4967732 e1000g: high mutex contention in e1000g_start |
| 6316907 e1000g: bcopy() brings better performance in transmitting and receiving small packet |
| 6371753 aggregation of e1000g NICs fails to provide connectivity unless snoop is running |
| 6397163 Jumbo frame statistics always counts zero with e1000g driver |
| 6401903 Memory leak in e1000g driver |
| |
| 5.0.7 |
| ====== |
| This version has the following fix: |
| 6337450 e1000g interfaces take much much longer to plumb than bge interfaces on the V40. |
| 6392401 Intel Ophir (82571) e1000g driver fails to attach on sun4u Boston with snv_33 |
| 6401659 vlan header getting corrupted due to memmove in e1000g sendPacket |
| 6407374 e1000g still uses some old ddi interrupt routines that need to be changed |
| 6411339 BAD TRAP: e1000g_fill_tx_ring NULL pointer dereference |
| |
| 5.0.8 |
| ====== |
| This version has the following fix: |
| 6399084 ipmp doesn't work with e1000g |
| 6412153 ndd force speed is not consistent with e1000g.conf and e1000g(7D) |
| 6415019 system panic when plumb e1000g interface up on SPARC |
| 6415416 netlbtest does not run on Intel(R) PRO/1000 Network controller |
| |
| 5.0.9 |
| ====== |
| This version has the following fix: |
| 6337987 Serial Over Lan issue when e1000g driver is used |
| |
| 5.1.0 |
| ====== |
| This version has the following fix: |
| PSARC/2006/248 Nemo MAC-Type Plugin Architecture |
| PSARC/2006/249 Nemo Changes for Binary Compatibility |
| 6384371 GLDv3 only supports Ethernet |
| 6242059 nemo drivers must not know the size of the mac_t structure |
| 6226635 MAC stats interface could cause problems with binary compatibility |
| |
| 5.1.1 |
| ====== |
| This version has the following fix: |
| 6384266 e1000g driver should provide external loopback support |
| 6428883 NEM e1000g drive netlbtest intermittent failed when running Sunvts FUNC test with cputest,vmemtest.. |
| 6430731 e1000g.conf file removed on upgrade |
| 6431317 add support for intel Pro/1000 PT Adapter |
| 6433236 Update the e1000g driver with the latest shared code from Intel |
| 6439589 e1000g: whines about checksum capability, unclear what user should do |
| 6441386 The default value of some e1000g parameters may impact rx performance |
| 6445239 assertion failed: cookie_count == 1, file: ../../common/io/e1000g/e1000g_alloc.c, line: 422 |
| 6447914 e1000g should support setting of multiple unicast addresses |
| 6449595 Ophir LAA driver workaround is not working for e1000g Driver |
| |
| 5.1.2 |
| ====== |
| This version has the following fix: |
| 6450683 Boston panics with e1000g under stress |
| 6463536 BAD TRAP panic for removing aggregation |
| 6463756 e1000g - link_speed / kstat output |
| 6464426 e1000g driver needs a workaround to solve an ESB2 hardware issue |
| |
| 5.1.3 |
| ====== |
| This version has the following fix: |
| 6436387 e1000g panic while using cfgadm to unconfigure the pcie slot |
| 6460403 disconnect of pcieX that has ophir with network if plumbed crashes the system |
| 6466962 S10u2 e1000g 5.0.9 adv_autoneg_cap is not reflected on the kstat -p |
| 6470233 e1000g_fill_tx_ring doesn't always update TDT properly |
| |
| 5.1.4 |
| ====== |
| This version has the following fix: |
| 6462893 HCTS network test failed on thumper machine due to e1000g issue |
| 6467860 e1000g configured/used as cluster interconnect goes up and down when connected back to back |
| |
| 5.1.5 |
| ====== |
| This version has the following fix: |
| 6479912 Interrupt throttling tunable needed |
| 6492025 northstar MMF e1000g external loopback fail. |
| |
| 5.1.6 |
| ====== |
| This version has the following fix: |
| 6482530 Need Ethernet driver for Intel G965 chipset |
| 6491179 link aggregation with e1000g does not work unless snoop is running |
| 6494743 e1000g 5.1.4 driver does not work with s11_52 |
| 6502458 e1000g is open source, move the source from usr/closed to use/src |
| 6505360 e1000g Makefile should not include "-N drv/dld" in the LDFLAGS |
| |
| 5.1.7 |
| ====== |
| This version has the following fix: |
| 6454375 e1000g link flaps at initialization, triggering failovers |
| 6472255 e1000g can't restore to 1000M with ndd setting |
| 6496763 e1000g should free packets when link is down |
| 6501294 "eeprom checksum failed" with pci8086,108c device |
| 6504688 e1000g.conf settings are inconsistent with ndd output |
| 6505445 e1000g : when all advertised capabilities are set to 0, ndd puts all of them 1 |
| 6519690 e1000g should not print the link up/down messages to console |
| 6531474 Fatal PCIe Fabric Error panics on T2000 when using jumbo frames on e1000g interfaces |
| 6535712 e1000g: the processing of the checksum flags should be protected by tx_lock |
| |
| 5.1.8 |
| ====== |
| This version has the following fix: |
| 6548711 e1000g: recursive mutex_enter in e1000g_link_check() on ESB2 platforms |
| 6550086 e1000g: detaching driver immediately after attach induces panic |
| |
| 5.1.9 |
| ====== |
| This version has the following fix: |
| 6507422 Dynamic Reconfiguration detach fails for e1000g |
| |
| 5.1.10 |
| ====== |
| This version has the following fix: |
| 6490623 Some networking problems with Solaris_b44_64 domU(using solaris_b44_64 dom0) |
| 6510396 system panicked in e1000g_82547_timeout |
| 6554976 e1000g driver does not support 10D5 device - Sun Pentwater PEM quad port |
| |
| 5.1.11 |
| ====== |
| This version has the following fix: |
| 6552853 system panics in e1000g_alloc_dvma_buffer during hotplug testing |
| |
| 5.2.0 |
| ====== |
| This version has the following fix: |
| 6535620 e1000g needs to support ICH9 devices |
| 6572330 e1000g: integrate the latest Intel refactored shared code |
| 6573381 e1000g receiving VLAN tagged frames does not do hardware checksumming |
| |
| 5.2.1 |
| ====== |
| This version has the following fix: |
| 6594676 e1000g should free private dips while no rx buffers are held by upper layer |
| |
| 5.2.2 |
| ====== |
| This version has the following fix: |
| 6480448 Sunvts netlbtest external loopback failed on 82546 chipset |
| 6521984 Sunvts netlbtest failed on Northstar QGE cards |
| 6531842 e1000g link goes down and up frequently on T2000 systems |
| 6540535 Sunvts netlbtest internal loopback failed on ophir devices |
| 6579605 Sunvts netlbtest internal loopback failed on Northstar fiber card |
| 6595668 e1000g postinstall script missed 5 device ids which had been supported by shared code |
| |
| 5.2.3 |
| ====== |
| This version has the following fix: |
| 6335851 e1000g needs to support FMA |
| 6605171 WARNING: pciex8086,105e - e1000g[0] : Initialize hw failed |
| |
| 5.2.4 |
| ====== |
| This version has the following fix: |
| 6619929 Sunvts test on Northstar QGC EM failed for "Not received any packets in loopback mode". |
| 6541233 e1000g driver performs 33X Slower for Tibco RV when running Multiple RVDs |
| 6572343 e1000g: needs to improve the ip forwarding performance |
| 6637039 e1000g_recycle() missed a mutex_exit() |
| |
| 5.2.5 |
| ====== |
| This version has the following fix: |
| 6648775 e1000g: pci8086,10be - e1000g[0]: Identify hardware failed |
| |
| 5.2.6 |
| ====== |
| This version has the following fix: |
| 6633239 e1000g: link flaps observed on Galaxy(X4100) systems running 64-bit kernel |
| |
| 5.2.7 |
| ====== |
| This version has the following fix: |
| 6673650 e1000g needs to support Brussels |
| |
| 5.2.8 |
| ====== |
| This version has the following fix: |
| 6674179 SunFire X4150 panics at e1000g_receive |
| 6679136 E1000g with patch 128028-03 will not allow pause frames to be set |
| 6687947 e1000g needs to integrate the latest Intel shared code to support ICH9m |
| 6699622 e1000g: add support for network device in new development machine |
| |
| 5.2.9 |
| ====== |
| 6665738 e1000g issues with some Ethernet controllers |
| 6713685 e1000g:one device id macro should be renamed |
| |
| 5.2.10 |
| ====== |
| This version has the following fixes: |
| 6335837 e1000g needs to support LSO |
| 6637659 e1000g has problem on transmit hardware checksum support |
| |
| 5.2.11 |
| ====== |
| This version has the following fixes: |
| 6698039 e1000g tx doesn't work on the specific chipset since snv_88 |
| 6597545 e1000g ESB2 serdes device pciex8086,1098 hangs in network testing |
| 6693205 running sunvts7.0 on Generic s10u5build10 causes unix:cmi_mca_panic on thumper |
| 6694279 e1000g driver: internal loopback mode support needed for nic ESB-2 |
| 6721574 max number of segments in e1000g_tx_dma_attr need to be updated when LSO is supported |
| |
| 5.2.12 |
| ====== |
| This version has the following fix: |
| 6634746 e1000g is missing lint target in Makefile |
| 6705005 e1000g LINK/ACT LED behaviour is not consistent with the EEPROM default |
| 6738552 e1000g rx_lock is not initialized and destroyed in the code |
| |
| 5.2.13 |
| ====== |
| This version has the following fix: |
| 6666998 Add support for ICH10 in e1000g driver |
| 6709230 Requesting driver support in e1000g for new Intel(R) single port MAC/PHY NIC |
| 6727113 e1000g performance regression is observed with large connection and packet size if LSO is enabled |
| 6756917 LSO is not enabled on some e1000g chips |
| |
| 5.2.14 |
| ====== |
| This version has the following fix: |
| 6713032 e1000g port hang, no xmit, no recv |
| 6767201 e1000g default_mtu does not coincide with max_frame_size on some chipsets when set via e1000g.conf |
| |
| 5.3.1 |
| ====== |
| This version has the following fix: |
| 6779610 e1000g fails to attach post-6713032 due to memory allocation failures on some chipsets |
| |
| 5.3.2 |
| ====== |
| This version has the following fix: |
| 6779494 e1000g need to sync with sol_anvik_patch shared code from Intel |
| 6758857 fmadm reporting undiagnosable problems in snv_99 |
| 6698312 starcat panicked with "bad mutex" while running SUNWsgdr |
| 6759330 PIT: panic during first reboot after successful pkgadd during osinstall |
| 6776453 Monza(CP3260): loopback test fails on e1000g serdes ports |
| |
| 5.3.3 |
| ====== |
| This version has the following fix: |
| 6791863 sync up flow control code with Intel latest shared code |
| |
| 5.3.4 |
| ====== |
| This version has the following fix: |
| 6699662 global e1000g rwlock prevents scaling on multiple interfaces |
| 6781905 super slow throughput on e1000g 82541 and 82547 chips |
| 6786783 e1000g needs to have a new tx stall detection mechanism to cover 82546 errata No.18 |
| |
| 5.3.5 |
| ====== |
| This version has the following fix: |
| 6732858 panic in e1000g_free_dma_buffer |
| |
| 5.3.6 |
| ====== |
| This version has the following fixes: |
| 6589577 Huron does not discard and does transmit frames greater than maxFrameSize |
| 6809729 Panic in function 'e1000g_rxfree_func' on T2000 |
| 6809877 e1000g E1000G_IPALIGNROOM code can be rewritten |
| |
| 5.3.7 |
| ====== |
| This version has the following fix: |
| 6812227 e1000g(intel 82571 adapter) must support MTU size of 9216 |
| |
| 5.3.8 |
| ====== |
| This version has the following fixes: |
| 6775380 the e1000g link hung at "up" state after down and unplumb the interface |
| 6816786 e1000g panics on Lenovo X301 with snv_109 |
| |
| 5.3.9 |
| ==== |
| This version has the following fix: |
| 6680929 dladm should print POSSIBLE values for properties like mtu by contacting the driver. |
| |
| 5.3.10 |
| ==== |
| This version has the following fix: |
| 6841089 Customer wants to be able to set MAX_NUM_MULTICAST_ADDRESSES above 256 on e1000g driver |
| |
| 5.3.11 |
| ==== |
| This version has the following fix: |
| 6848586 rw_enter()/rw_exit() could be called on uninitialized rw lock |
| |
| 5.3.12 |
| ==== |
| This version has the following fixes: |
| 6846262 T2000 fma shows fault.io.pciex.device-interr in snv_115 |
| 6870404 e1000g_reset can call e1000g_start after releasing dma resources |
| |
| 5.3.13 |
| ==== |
| This version has the following fixes: |
| 6681751 e1000g minor_perm inconsistent between package postinstall script and default minor_perm file |
| 6855964 e1000g driver corrupting LSO packets causes chipset hang and significant performance regression |
| |
| 5.3.14 |
| ==== |
| This version has the following fixes: |
| 6820747 kstat output incorrect for MMF version of e1000g making it impossible to troubleshoot |
| 6847888 HW initialization updates for 82541 and 82547 chips |
| |
| 5.3.15 |
| ====== |
| This version has the following fixes: |
| 6797885 need to add support for network device (8086,10ea) in a new Intel system |
| 6803799 need to add network device support (8086,10ef) for a new Intel system |
| 6808388 e1000g inteface experience packet lost when switch between joining and leaving a multicast stream |
| |
| 5.3.16 |
| ====== |
| This version has the following fixes: |
| 6881588 e1000g functions should return when e1000g_check_dma_handle() fails |
| 6888320 e1000g emits scary mutex message on the console |
| |
| 5.3.17 |
| ====== |
| This version has the following fixes: |
| 6893285 e1000g 'pciex8086,105e' with PHY type igp I/O devices have been retired |
| 6895459 e1000g share code update v3-1-10-1 |
| |
| 5.3.18 |
| ====== |
| This version has the following fix: |
| 6894476 e1000g is not lint clean |
| |
| 5.3.19 |
| ====== |
| This version has the following fix: |
| 6877343 e1000g's default tx/rx resource consumption too high for jumbograms |
| |
| 5.3.20 |
| ====== |
| This version has the following fixes: |
| 6901523 e1000g does not return failure when setting external loopback fails |
| 6903712 Cannot install on DQ45EK system due to e1000g driver alias |
| 6909097 e1000g specifies incorrect flag when allocating tx DMA buffers |
| 6909553 e1000g stall reset leaves GLDv3 link state as "unknown" |
| |
| 5.3.21 |
| ====== |
| This version has the following fix: |
| 6909134 e1000g doesn't use ddi_get/ddi_put to access its IO space |
| |
| 5.3.22 |
| ====== |
| This version has the following fixes: |
| 6903292 Running flag not set on IPMP underlying e1000g interfaces |
| 6913835 e1000g driver passes bad messages up the stack when jumbograms received |
| 6919873 panic: BAD TRAP: type=e (#pf Page fault) in module "e1000g" during ifconfig plumb group ipmp0 |
| |
| 5.3.23 |
| ===== |
| This version has the following fixes: |
| 6838180 tcp corruption seen with northstar cards |
| 6925276 e1000g not consistent with link_lock usage |
| 6933844 NULL ptr deref in e1000g_rx_setup() due to inconsistency between recv_list & rx_desc_num |
| |
| 5.3.24 |
| ===== |
| This version has the following fixes: |
| 6861114 System Panics with FMA ereport.io.fire.epkt |
| 6876953 Memory leaks found in e1000g_alloc_rx_sw_packet on snv_111b |
| 6945160 netlbtest fails with Can't set loopback mode on device e1000g6 |
| 6960959 panic in e1000g_receive |
| 6965855 e1000g(intel 82571 adapter) needs to support MTU size of 9000 |
| 6967530 Need version in e1000g driver |
| 6967873 e1000g needs to clear the link-down status when being unplumbed |