usr/src/lib/Makefile - illumos-gate - Gitiles

 #
 # CDDL HEADER START
 #
 # The contents of this file are subject to the terms of the
 # Common Development and Distribution License (the "License").
 # You may not use this file except in compliance with the License.
 #
 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 # or http://www.opensolaris.org/os/licensing.
 # See the License for the specific language governing permissions
 # and limitations under the License.
 #
 # When distributing Covered Code, include this CDDL HEADER in each
 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 # If applicable, add the following below this CDDL HEADER, with the
 # fields enclosed by brackets "[]" replaced with your own identifying
 # information: Portions Copyright [yyyy] [name of copyright owner]
 #
 # CDDL HEADER END
 #
 #
 # Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
 # Use is subject to license terms.
 #
 # ident	"%Z%%M%	%I%	%E% SMI"

 include ../Makefile.master

 #	Note that libcurses installs commands along with its library.
 #	This is a minor bug which probably should be fixed.
 #	Note also that a few extra libraries are kept in cmd source.
 #
 # Certain libraries are linked with, hence depend on, other libraries.
 #
 # Although we have historically used .WAIT to express dependencies, it
 # reduces the amount of parallelism and thus lengthens the time it
 # takes to build the libraries.  Thus, we now require that any new
 # libraries explicitly call out their dependencies.  Eventually, all
 # the library dependencies will be called out explicitly.  See
 # "Library interdependencies" near the end of this file.
 #
 # Aside from explicit dependencies (and legacy .WAITs), all libraries
 # are built in parallel.
 #
 .PARALLEL:

 #
 # The $(CLOSED_BUILD) additions to SUBDIRS & MSGSUBDIRS are unfortunate,
 # but required due to the "dependencies" of using .WAIT to barrier the
 # parallel dmake builds.  once 4631488 has been fixed, they can be
 # consolidated into one $(CLOSED_BUILD)SUBDIRS += (all closed libs) as
 # shown in HDRSUBDIRS
 #
 SUBDIRS= \
 	common			.WAIT	\
 	abi/apptrace		.WAIT	\
 	../cmd/abi/spectrans	.WAIT	\
 	../cmd/sgs/libconv		\
 	../cmd/sgs/libdl	.WAIT

 $(CLOSED_BUILD)SUBDIRS += \
 	$(CLOSED)/lib/libc_i18n

 SUBDIRS += \
 	libc			.WAIT	\
 	libmapmalloc		.WAIT	\
 	../cmd/sgs/libelf	.WAIT	\
 	libmd5				\
 	librsm				\
 	libmp			.WAIT	\
 	libcmd			\
 	libnsl			\
 	libsecdb		.WAIT	\
 	librpcsvc			\
 	libsocket		.WAIT	\
 	libsctp			\
 	libresolv			\
 	libresolv2		.WAIT	\
 	libw			.WAIT	\
 	libintl			.WAIT	\
 	../cmd/sgs/librtld_db	\
 	libaio			\
 	librt			\
 	libadm			\
 	libctf			\
 	libdtrace		\
 	libdtrace_jni		\
 	libcurses		\
 	libgen			\
 	libgss			\
 	libpam			\
 	libuuid			\
 	libthread		\
 	libpthread	.WAIT	\
 	libslp		\
 	libbsdmalloc	\
 	libdoor		\
 	libdevinfo	\
 	libdladm	\
 	libdlpi		\
 	libeti		\
 	libcrypt	\
 	libefi		\
 	libwanboot	\
 	libwanbootutil	\
 	libcryptoutil	\
 	libinetcfg	\
 	libinetutil	\
 	libipmp		\
 	libkstat	\
 	libkvm		\
         liblaadm        \
 	liblm		\
 	libmacadm	\
 	libmalloc	\
 	libmtmalloc	\
 	libnls		\
 	libsmbios	\
 	libtecla	\
 	libumem		\
 	libnvpair	.WAIT	\
 	libexacct	\
 	libplot		\
 	libldap4	\
 	libsasl		\
 	libldap5	\
 	libsldap	.WAIT	\
 	libbsm		\
 	libsys		\
 	libsysevent	\
 	libnisdb	\
 	libpool		\
 	libproc		\
 	libproject	\
 	libsendfile	\
 	nametoaddr	\
 	ncad_addr	\
 	gss_mechs/mech_krb5	.WAIT	\
 	krb5	.WAIT
 $(CLOSED_BUILD)SUBDIRS += \
 	$(CLOSED)/lib/smartcard
 SUBDIRS += \
 	passwdutil	\
 	pam_modules	\
 	crypt_modules	\
 	libadt_jni	\
 	auditd_plugins	\
 	libvolmgt	\
 	libdevice	\
 	libdevid	\
 	libdhcpsvc	\
 	libc_db		\
 	libsec		\
 	libtnfprobe	\
 	libtnf		\
 	libtnfctl	\
 	libdhcpagent	\
 	libdhcpdu	\
 	libdhcputil	\
 	libipsecutil
 $(CLOSED_BUILD)SUBDIRS += \
 	$(CLOSED)/lib/libike
 SUBDIRS += \
 	nsswitch	\
 	print		\
 	libuutil	\
 	libscf		\
 	libinetsvc	\
 	librestart	\
 	libsched
 $(CLOSED_BUILD)SUBDIRS += \
 	$(CLOSED)/lib/libelfsign
 SUBDIRS += \
 	pkcs11		.WAIT	\
 	libpctx		.WAIT	\
 	libcpc		\
 	watchmalloc	\
 	madv		\
 	mpss		\
 	libdisasm	\
 	libwrap		\
 	libxcurses	\
 	libxcurses2	\
 	libxnet		\
 	libzonecfg	\
 	libzoneinfo	\
 	libtsnet	\
 	libtsol		\
 	gss_mechs/mech_spnego	\
 	gss_mechs/mech_dummy	\
 	gss_mechs/mech_dh	\
 	rpcsec_gss	\
 	librcm		.WAIT	\
 	libcfgadm	.WAIT	\
 	libpicl		.WAIT	\
 	libpicltree	.WAIT \
 	cfgadm_plugins	\
 	libmail		\
 	lvm		\
 	libsmedia	\
 	libipp		\
 	openssl		\
 	libdiskmgt	\
 	liblgrp		\
 	libfsmgt	\
 	fm		\
 	libavl		\
 	libcmdutils	\
 	libcontract	\
 	../cmd/sendmail/libmilter	\
 	sasl_plugins	\
 	udapl		\
 	libzpool	\
 	libzfs		\
 	libzfs_jni	\
 	$($(MACH)_SUBDIRS)

 sparc_SUBDIRS= .WAIT	\
 	efcode		\
 	libc_psr	.WAIT	\
 	libmd5_psr	.WAIT
 $(CLOSED_BUILD)sparc_SUBDIRS += \
 	$(CLOSED)/lib/libprtdiag	.WAIT	\
 	$(CLOSED)/lib/libprtdiag_psr	\
 	$(CLOSED)/lib/librsc
 sparc_SUBDIRS += \
 	libfruutils	.WAIT	\
 	libfru		\
 	libwrsmconf	\
 	storage		\
 	wrsm		\
 	libpcp

 fm: libexacct

 #
 # Create a special version of $(SUBDIRS) with no .WAIT's, for use with the
 # clean and clobber targets (for more information, see those targets, below).
 #
 NOWAIT_SUBDIRS= $(SUBDIRS:.WAIT=)

 DCSUBDIRS =		\
 	lvm

 MSGSUBDIRS=		\
 	abi		\
 	auditd_plugins	\
 	cfgadm_plugins	\
 	gss_mechs/mech_dh	\
 	gss_mechs/mech_krb5	\
 	krb5		\
 	libbsm		\
 	libc		\
 	libcfgadm	\
 	libcontract	\
 	libcurses	\
 	libdhcpsvc 	\
 	libdhcputil	\
 	libgss		\
 	libinetcfg	\
 	libipmp		\
 	libnsl		\
 	libpam		\
 	libpicl		\
 	libpool		\
 	libscf		\
 	libsasl		\
 	libldap5	\
 	libsecdb	\
 	libsldap	\
 	libslp		\
 	libsmedia	\
 	libtsol		\
 	libuutil	\
 	libwanboot	\
 	libwanbootutil	\
 	libzonecfg	\
 	lvm		\
 	madv		\
 	mpss		\
 	pam_modules	\
 	rpcsec_gss
 $(CLOSED_BUILD)MSGSUBDIRS += \
 	$(CLOSED)/lib/smartcard
 MSGSUBDIRS += \
 	$($(MACH)_MSGSUBDIRS)

 sparc_MSGSUBDIRS=

 $(CLOSED_BUILD)sparc_MSGSUBDIRS +=	\
 	$(CLOSED)/lib/libprtdiag	\
 	$(CLOSED)/lib/libprtdiag_psr

 HDRSUBDIRS= libaio	\
 	auditd_plugins	\
 	libbsm		\
 	libc		\
 	libcmdutils	\
 	libcontract	\
 	libcpc		\
 	libctf		\
 	libcurses	\
 	libcryptoutil	\
 	libdevice	\
 	libdevid	\
 	libdevinfo	\
 	libdiskmgt	\
 	libdladm	\
 	libdlpi		\
 	libdhcpagent	\
 	libdhcpsvc	\
 	libdhcputil	\
 	libdisasm	\
 	libdtrace	\
 	libdtrace_jni	\
 	libeti		\
 	libgen		\
 	libwanboot	\
 	libwanbootutil	\
 	libipsecutil	\
 	libinetcfg	\
 	libinetsvc	\
 	libinetutil	\
 	libipmp		\
 	libipp		\
 	libkstat	\
 	libkvm		\
         liblaadm        \
 	libmacadm	\
 	libmail		\
 	libmtmalloc	\
 	libnvpair	\
 	libnsl		\
 	libpam		\
 	libpctx		\
 	libpicl		\
 	libpicltree	\
 	libplot		\
 	libpool		\
 	libproc		\
 	librcm		\
 	libscf		\
 	libsmbios	\
 	librestart	\
 	librpcsvc	\
 	librsm		\
 	libsasl		\
 	libsec		\
 	libslp		\
 	libsmedia	\
 	libsysevent	\
 	libtecla	\
 	libtnf		\
 	libtnfctl	\
 	libtnfprobe	\
 	libtsnet	\
 	libtsol		\
 	libvolmgt	\
 	libumem		\
 	libuutil	\
 	libwrap		\
 	libxcurses2	\
 	libzfs		\
 	libzfs_jni	\
 	libzoneinfo	\
 	lvm		\
 	openssl		\
 	pkcs11		\
 	passwdutil	\
 	../cmd/sendmail/libmilter	\
 	fm		\
 	udapl		\
 	$($(MACH)_HDRSUBDIRS)

 $(CLOSED_BUILD)HDRSUBDIRS += \
 	$(CLOSED)/lib/libc_i18n	\
 	$(CLOSED)/lib/libike	\
 	$(CLOSED)/lib/smartcard

 sparc_HDRSUBDIRS=	\
 	libwrsmconf

 all :=		TARGET= all
 check :=	TARGET= check
 clean :=	TARGET= clean
 clobber :=	TARGET= clobber
 install :=	TARGET= install
 install_h :=	TARGET= install_h
 lint :=		TARGET= lint
 _dc :=		TARGET= _dc
 _msg :=		TARGET= _msg

 .KEEP_STATE:

 #
 # For the all and install targets, we clearly must respect library
 # dependencies so that the libraries link correctly.  However, for
 # the remaining targets (check, clean, clobber, install_h, lint, _dc
 # and _msg), libraries do not have any dependencies on one another
 # and thus respecting dependencies just slows down the build.
 # As such, for these rules, we use pattern replacement to explicitly
 # avoid triggering the dependency information.  Note that for clean,
 # clobber and lint, we must use $(NOWAIT_SUBDIRS) rather than
 # $(SUBDIRS), to prevent `.WAIT' from expanding to `.WAIT-nodepend'.
 #

 all:			$(SUBDIRS)

 install:		$(SUBDIRS) .WAIT install_extra

 # extra libraries kept in other source areas
 install_extra:
 	@cd ../cmd/sgs; pwd; $(MAKE) install_lib
 	@pwd

 clean clobber lint:	$(NOWAIT_SUBDIRS:%=%-nodepend)

 install_h check:	$(HDRSUBDIRS:%=%-nodepend)

 _msg:			$(MSGSUBDIRS:%=%-nodepend) .WAIT _dc

 _dc:			$(DCSUBDIRS:%=%-nodepend)

 # dependencies for pam_modules (see below)
 $(CLOSED_BUILD)SMARTCARD=	$(CLOSED)/lib/smartcard

 #
 # Library interdependencies are called out explicitly here
 #
 auditd_plugins: libbsm libnsl libsecdb
 gss_mechs/mech_krb5:	libgss libnsl libsocket libresolv pkcs11
 libadt_jni:	libbsm
 $(CLOSED_BUILD)libc:		$(CLOSED)/lib/libc_i18n
 libbsm:		libtsol
 libcmdutils:	libavl
 libcontract:	libnvpair
 libdevid:	libdevinfo
 libdevinfo:	libnvpair libsec
 libdhcpagent:	libdhcputil libnsl libsocket
 libdhcpsvc:	libinetutil
 libdhcputil:	libinetutil
 libdladm:	libdlpi libdevinfo
 libdtrace:	libproc libgen libctf
 libdtrace_jni:	libuutil libdtrace
 libefi:		libuuid
 $(CLOSED_BUILD)$(CLOSED)/lib/libelfsign: \
 			$(CLOSED)/lib/libike libcryptoutil pkcs11
 libinetcfg:	libnsl libsocket libdevinfo
 libnsl:		libmd5 libscf
 libmacadm:	libdevinfo
 libuuid:	libsocket
 libinetutil:	libsocket
 libsecdb:	libcmd libnsl
 librt:		libaio libmd5
 libsasl:	libgss libsocket pkcs11 libmd5
 sasl_plugins:	pkcs11 libgss libsocket libsasl
 libsctp:	libsocket
 libsocket:	libnsl
 libldap5:	libsasl libsocket libnsl libmd5
 libsldap:	libldap5 libtsol
 libpool:	libnvpair libexacct
 libproject:	libpool libproc libsecdb
 libtsnet:	libnsl libtsol libsecdb
 libwrap:	libnsl libsocket
 libwanboot:	libnvpair libresolv libnsl libsocket libdevinfo libinetutil \
 		libdhcputil openssl
 libwanbootutil:	libnsl
 pam_modules:	libproject passwdutil $(SMARTCARD)
 libscf:		libuutil
 libinetsvc:	libscf
 librestart:	libuutil libscf
 ../cmd/sgs/libdl:	../cmd/sgs/libconv
 ../cmd/sgs/libelf:	../cmd/sgs/libconv
 pkcs11:		libcryptoutil
 print:		libldap5
 udapl/udapl_tavor:	udapl/libdat
 libzfs:		libdevinfo libdevid libgen libnvpair libuutil
 libzfs_jni:	libdiskmgt libnvpair libzfs
 libzpool:	libavl libumem libnvpair
 libsec:		libavl

 #
 # The reason this rule checks for the existence of the
 # Makefile is that some of the directories do not exist
 # in certain situations (e.g., exportable source builds,
 # OpenSolaris).
 #
 $(SUBDIRS) abi: FRC
 	@if [ -f $@/Makefile  ]; then \
 		cd $@; pwd; $(MAKE) $(TARGET); \
 	else \
 		true; \
 	fi

 $(SUBDIRS:%=%-nodepend) abi-nodepend:
 	@if [ -f $(@:%-nodepend=%)/Makefile  ]; then \
 		cd $(@:%-nodepend=%); pwd; $(MAKE) $(TARGET); \
 	else \
 		true; \
 	fi

 FRC:
	#
	# CDDL HEADER START
	#
	# The contents of this file are subject to the terms of the
	# Common Development and Distribution License (the "License").
	# You may not use this file except in compliance with the License.
	#
	# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
	# or http://www.opensolaris.org/os/licensing.
	# See the License for the specific language governing permissions
	# and limitations under the License.
	#
	# When distributing Covered Code, include this CDDL HEADER in each
	# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
	# If applicable, add the following below this CDDL HEADER, with the
	# fields enclosed by brackets "[]" replaced with your own identifying
	# information: Portions Copyright [yyyy] [name of copyright owner]
	#
	# CDDL HEADER END
	#
	#
	# Copyright 2006 Sun Microsystems, Inc. All rights reserved.
	# Use is subject to license terms.
	#
	# ident "%Z%%M% %I% %E% SMI"

	include ../Makefile.master

	# Note that libcurses installs commands along with its library.
	# This is a minor bug which probably should be fixed.
	# Note also that a few extra libraries are kept in cmd source.
	#
	# Certain libraries are linked with, hence depend on, other libraries.
	#
	# Although we have historically used .WAIT to express dependencies, it
	# reduces the amount of parallelism and thus lengthens the time it
	# takes to build the libraries. Thus, we now require that any new
	# libraries explicitly call out their dependencies. Eventually, all
	# the library dependencies will be called out explicitly. See
	# "Library interdependencies" near the end of this file.
	#
	# Aside from explicit dependencies (and legacy .WAITs), all libraries
	# are built in parallel.
	#
	.PARALLEL:

	#
	# The $(CLOSED_BUILD) additions to SUBDIRS & MSGSUBDIRS are unfortunate,
	# but required due to the "dependencies" of using .WAIT to barrier the
	# parallel dmake builds. once 4631488 has been fixed, they can be
	# consolidated into one $(CLOSED_BUILD)SUBDIRS += (all closed libs) as
	# shown in HDRSUBDIRS
	#
	SUBDIRS= \
	common .WAIT \
	abi/apptrace .WAIT \
	../cmd/abi/spectrans .WAIT \
	../cmd/sgs/libconv \
	../cmd/sgs/libdl .WAIT

	$(CLOSED_BUILD)SUBDIRS += \
	$(CLOSED)/lib/libc_i18n

	SUBDIRS += \
	libc .WAIT \
	libmapmalloc .WAIT \
	../cmd/sgs/libelf .WAIT \
	libmd5 \
	librsm \
	libmp .WAIT \
	libcmd \
	libnsl \
	libsecdb .WAIT \
	librpcsvc \
	libsocket .WAIT \
	libsctp \
	libresolv \
	libresolv2 .WAIT \
	libw .WAIT \
	libintl .WAIT \
	../cmd/sgs/librtld_db \
	libaio \
	librt \
	libadm \
	libctf \
	libdtrace \
	libdtrace_jni \
	libcurses \
	libgen \
	libgss \
	libpam \
	libuuid \
	libthread \
	libpthread .WAIT \
	libslp \
	libbsdmalloc \
	libdoor \
	libdevinfo \
	libdladm \
	libdlpi \
	libeti \
	libcrypt \
	libefi \
	libwanboot \
	libwanbootutil \
	libcryptoutil \
	libinetcfg \
	libinetutil \
	libipmp \
	libkstat \
	libkvm \
	liblaadm \
	liblm \
	libmacadm \
	libmalloc \
	libmtmalloc \
	libnls \
	libsmbios \
	libtecla \
	libumem \
	libnvpair .WAIT \
	libexacct \
	libplot \
	libldap4 \
	libsasl \
	libldap5 \
	libsldap .WAIT \
	libbsm \
	libsys \
	libsysevent \
	libnisdb \
	libpool \
	libproc \
	libproject \
	libsendfile \
	nametoaddr \
	ncad_addr \
	gss_mechs/mech_krb5 .WAIT \
	krb5 .WAIT
	$(CLOSED_BUILD)SUBDIRS += \
	$(CLOSED)/lib/smartcard
	SUBDIRS += \
	passwdutil \
	pam_modules \
	crypt_modules \
	libadt_jni \
	auditd_plugins \
	libvolmgt \
	libdevice \
	libdevid \
	libdhcpsvc \
	libc_db \
	libsec \
	libtnfprobe \
	libtnf \
	libtnfctl \
	libdhcpagent \
	libdhcpdu \
	libdhcputil \
	libipsecutil
	$(CLOSED_BUILD)SUBDIRS += \
	$(CLOSED)/lib/libike
	SUBDIRS += \
	nsswitch \
	print \
	libuutil \
	libscf \
	libinetsvc \
	librestart \
	libsched
	$(CLOSED_BUILD)SUBDIRS += \
	$(CLOSED)/lib/libelfsign
	SUBDIRS += \
	pkcs11 .WAIT \
	libpctx .WAIT \
	libcpc \
	watchmalloc \
	madv \
	mpss \
	libdisasm \
	libwrap \
	libxcurses \
	libxcurses2 \
	libxnet \
	libzonecfg \
	libzoneinfo \
	libtsnet \
	libtsol \
	gss_mechs/mech_spnego \
	gss_mechs/mech_dummy \
	gss_mechs/mech_dh \
	rpcsec_gss \
	librcm .WAIT \
	libcfgadm .WAIT \
	libpicl .WAIT \
	libpicltree .WAIT \
	cfgadm_plugins \
	libmail \
	lvm \
	libsmedia \
	libipp \
	openssl \
	libdiskmgt \
	liblgrp \
	libfsmgt \
	fm \
	libavl \
	libcmdutils \
	libcontract \
	../cmd/sendmail/libmilter \
	sasl_plugins \
	udapl \
	libzpool \
	libzfs \
	libzfs_jni \
	$($(MACH)_SUBDIRS)

	sparc_SUBDIRS= .WAIT \
	efcode \
	libc_psr .WAIT \
	libmd5_psr .WAIT
	$(CLOSED_BUILD)sparc_SUBDIRS += \
	$(CLOSED)/lib/libprtdiag .WAIT \
	$(CLOSED)/lib/libprtdiag_psr \
	$(CLOSED)/lib/librsc
	sparc_SUBDIRS += \
	libfruutils .WAIT \
	libfru \
	libwrsmconf \
	storage \
	wrsm \
	libpcp

	fm: libexacct

	#
	# Create a special version of $(SUBDIRS) with no .WAIT's, for use with the
	# clean and clobber targets (for more information, see those targets, below).
	#
	NOWAIT_SUBDIRS= $(SUBDIRS:.WAIT=)

	DCSUBDIRS = \
	lvm

	MSGSUBDIRS= \
	abi \
	auditd_plugins \
	cfgadm_plugins \
	gss_mechs/mech_dh \
	gss_mechs/mech_krb5 \
	krb5 \
	libbsm \
	libc \
	libcfgadm \
	libcontract \
	libcurses \
	libdhcpsvc \
	libdhcputil \
	libgss \
	libinetcfg \
	libipmp \
	libnsl \
	libpam \
	libpicl \
	libpool \
	libscf \
	libsasl \
	libldap5 \
	libsecdb \
	libsldap \
	libslp \
	libsmedia \
	libtsol \
	libuutil \
	libwanboot \
	libwanbootutil \
	libzonecfg \
	lvm \
	madv \
	mpss \
	pam_modules \
	rpcsec_gss
	$(CLOSED_BUILD)MSGSUBDIRS += \
	$(CLOSED)/lib/smartcard
	MSGSUBDIRS += \
	$($(MACH)_MSGSUBDIRS)

	sparc_MSGSUBDIRS=

	$(CLOSED_BUILD)sparc_MSGSUBDIRS += \
	$(CLOSED)/lib/libprtdiag \
	$(CLOSED)/lib/libprtdiag_psr

	HDRSUBDIRS= libaio \
	auditd_plugins \
	libbsm \
	libc \
	libcmdutils \
	libcontract \
	libcpc \
	libctf \
	libcurses \
	libcryptoutil \
	libdevice \
	libdevid \
	libdevinfo \
	libdiskmgt \
	libdladm \
	libdlpi \
	libdhcpagent \
	libdhcpsvc \
	libdhcputil \
	libdisasm \
	libdtrace \
	libdtrace_jni \
	libeti \
	libgen \
	libwanboot \
	libwanbootutil \
	libipsecutil \
	libinetcfg \
	libinetsvc \
	libinetutil \
	libipmp \
	libipp \
	libkstat \
	libkvm \
	liblaadm \
	libmacadm \
	libmail \
	libmtmalloc \
	libnvpair \
	libnsl \
	libpam \
	libpctx \
	libpicl \
	libpicltree \
	libplot \
	libpool \
	libproc \
	librcm \
	libscf \
	libsmbios \
	librestart \
	librpcsvc \
	librsm \
	libsasl \
	libsec \
	libslp \
	libsmedia \
	libsysevent \
	libtecla \
	libtnf \
	libtnfctl \
	libtnfprobe \
	libtsnet \
	libtsol \
	libvolmgt \
	libumem \
	libuutil \
	libwrap \
	libxcurses2 \
	libzfs \
	libzfs_jni \
	libzoneinfo \
	lvm \
	openssl \
	pkcs11 \
	passwdutil \
	../cmd/sendmail/libmilter \
	fm \
	udapl \
	$($(MACH)_HDRSUBDIRS)

	$(CLOSED_BUILD)HDRSUBDIRS += \
	$(CLOSED)/lib/libc_i18n \
	$(CLOSED)/lib/libike \
	$(CLOSED)/lib/smartcard

	sparc_HDRSUBDIRS= \
	libwrsmconf

	all := TARGET= all
	check := TARGET= check
	clean := TARGET= clean
	clobber := TARGET= clobber
	install := TARGET= install
	install_h := TARGET= install_h
	lint := TARGET= lint
	_dc := TARGET= _dc
	_msg := TARGET= _msg

	.KEEP_STATE:

	#
	# For the all and install targets, we clearly must respect library
	# dependencies so that the libraries link correctly. However, for
	# the remaining targets (check, clean, clobber, install_h, lint, _dc
	# and _msg), libraries do not have any dependencies on one another
	# and thus respecting dependencies just slows down the build.
	# As such, for these rules, we use pattern replacement to explicitly
	# avoid triggering the dependency information. Note that for clean,
	# clobber and lint, we must use $(NOWAIT_SUBDIRS) rather than
	# $(SUBDIRS), to prevent `.WAIT' from expanding to `.WAIT-nodepend'.
	#

	all: $(SUBDIRS)

	install: $(SUBDIRS) .WAIT install_extra

	# extra libraries kept in other source areas
	install_extra:
	@cd ../cmd/sgs; pwd; $(MAKE) install_lib
	@pwd

	clean clobber lint: $(NOWAIT_SUBDIRS:%=%-nodepend)

	install_h check: $(HDRSUBDIRS:%=%-nodepend)

	_msg: $(MSGSUBDIRS:%=%-nodepend) .WAIT _dc

	_dc: $(DCSUBDIRS:%=%-nodepend)

	# dependencies for pam_modules (see below)
	$(CLOSED_BUILD)SMARTCARD= $(CLOSED)/lib/smartcard

	#
	# Library interdependencies are called out explicitly here
	#
	auditd_plugins: libbsm libnsl libsecdb
	gss_mechs/mech_krb5: libgss libnsl libsocket libresolv pkcs11
	libadt_jni: libbsm
	$(CLOSED_BUILD)libc: $(CLOSED)/lib/libc_i18n
	libbsm: libtsol
	libcmdutils: libavl
	libcontract: libnvpair
	libdevid: libdevinfo
	libdevinfo: libnvpair libsec
	libdhcpagent: libdhcputil libnsl libsocket
	libdhcpsvc: libinetutil
	libdhcputil: libinetutil
	libdladm: libdlpi libdevinfo
	libdtrace: libproc libgen libctf
	libdtrace_jni: libuutil libdtrace
	libefi: libuuid
	$(CLOSED_BUILD)$(CLOSED)/lib/libelfsign: \
	$(CLOSED)/lib/libike libcryptoutil pkcs11
	libinetcfg: libnsl libsocket libdevinfo
	libnsl: libmd5 libscf
	libmacadm: libdevinfo
	libuuid: libsocket
	libinetutil: libsocket
	libsecdb: libcmd libnsl
	librt: libaio libmd5
	libsasl: libgss libsocket pkcs11 libmd5
	sasl_plugins: pkcs11 libgss libsocket libsasl
	libsctp: libsocket
	libsocket: libnsl
	libldap5: libsasl libsocket libnsl libmd5
	libsldap: libldap5 libtsol
	libpool: libnvpair libexacct
	libproject: libpool libproc libsecdb
	libtsnet: libnsl libtsol libsecdb
	libwrap: libnsl libsocket
	libwanboot: libnvpair libresolv libnsl libsocket libdevinfo libinetutil \
	libdhcputil openssl
	libwanbootutil: libnsl
	pam_modules: libproject passwdutil $(SMARTCARD)
	libscf: libuutil
	libinetsvc: libscf
	librestart: libuutil libscf
	../cmd/sgs/libdl: ../cmd/sgs/libconv
	../cmd/sgs/libelf: ../cmd/sgs/libconv
	pkcs11: libcryptoutil
	print: libldap5
	udapl/udapl_tavor: udapl/libdat
	libzfs: libdevinfo libdevid libgen libnvpair libuutil
	libzfs_jni: libdiskmgt libnvpair libzfs
	libzpool: libavl libumem libnvpair
	libsec: libavl

	#
	# The reason this rule checks for the existence of the
	# Makefile is that some of the directories do not exist
	# in certain situations (e.g., exportable source builds,
	# OpenSolaris).
	#
	$(SUBDIRS) abi: FRC
	@if [ -f $@/Makefile ]; then \
	cd $@; pwd; $(MAKE) $(TARGET); \
	else \
	true; \
	fi

	$(SUBDIRS:%=%-nodepend) abi-nodepend:
	@if [ -f $(@:%-nodepend=%)/Makefile ]; then \
	cd $(@:%-nodepend=%); pwd; $(MAKE) $(TARGET); \
	else \
	true; \
	fi

	FRC: