usr/src/cmd/cmd-inet/usr.sbin/Makefile - illumos-gate - Gitiles

 #
 # CDDL HEADER START
 #
 # The contents of this file are subject to the terms of the
 # Common Development and Distribution License (the "License").
 # You may not use this file except in compliance with the License.
 #
 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 # or http://www.opensolaris.org/os/licensing.
 # See the License for the specific language governing permissions
 # and limitations under the License.
 #
 # When distributing Covered Code, include this CDDL HEADER in each
 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 # If applicable, add the following below this CDDL HEADER, with the
 # fields enclosed by brackets "[]" replaced with your own identifying
 # information: Portions Copyright [yyyy] [name of copyright owner]
 #
 # CDDL HEADER END


 #
 #
 # Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
 # Use is subject to license terms.
 #
 # ident	"%Z%%M%	%I%	%E% SMI"
 #

 SYNCPROG=	syncinit syncloop syncstat
 DHCPPROG=	dhcpconfig dhtadm pntadm

 # EXPORT DELETE START
 XMODPROG=	wanbootutil
 # EXPORT DELETE END

 PROG=		6to4relay arp gettable if_mpadm ikeadm ikecert \
 		in.comsat in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind \
 		in.rshd in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \
 		ipsecalgs ipsecconf ipseckey ndd $(SYNCPROG) $(DHCPPROG) \
 		$(XMODPROG)

 MANIFEST=	rarp.xml telnet.xml comsat.xml finger.xml \
 		login.xml shell.xml rexec.xml tname.xml

 ROOTFS_PROG=	hostconfig route routeadm soconfig
 SBINLINKS=	hostconfig route routeadm

 RPCSVCPROG=	hostconfig
 AUDITPROG=	in.rexecd in.rlogind in.rshd in.telnetd
 PAMPROG=	in.rexecd in.rlogind in.rshd in.telnetd
 SOCKETPROG=	6to4relay arp gettable hostconfig if_mpadm in.comsat \
 		in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind in.rshd \
 		in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \
 		ipsecalgs ipsecconf ipseckey route routeadm
 NSLPROG=	6to4relay arp gettable hostconfig ikeadm in.comsat in.rarpd \
 		in.rdisc in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \
 		in.tftpd in.tnamed ipaddrsel ipsecalgs ipsecconf ipseckey route
 CMDPROG=	in.telnetd
 IPSECUTILPROG=	ikeadm ipsecalgs ipsecconf ipseckey
 K5PROGS=	in.telnetd in.rlogind in.rshd
 TSNETPROG=	route
 DEFAULTFILES=	telnetd.dfl

 PROGSRCS=	$(PROG:%=%.c)
 TFTPDOBJS=	in.tftpd.o tftpsubs.o
 OTHERSRC=	../usr.bin/tftp/tftpsubs.c
 K5RLOGINOBJS=	in.rlogind.o
 K5RSHDOBJS=	in.rshd.o
 SRCS=		$(PROGSRCS) $(OTHERSRC)

 SUBDIRS=	bootconfchk htable ifconfig in.ftpd in.routed \
 		in.talkd inetadm inetconv ipqosconf kssl/kssladm \
 		kssl/ksslcfg  mipagentconfig mipagentstat ping snoop \
 		sppptun traceroute wificonfig

 MSGSUBDIRS=	bootconfchk htable ifconfig in.ftpd in.routed in.talkd \
 		inetadm inetconv ipqosconf kssl/ksslcfg mipagentconfig \
 		mipagentstat sppptun snoop wificonfig

 # As programs get lint-clean, add them here and to the 'lint' target.
 # Eventually this hack should go away, and all in PROG should be
 # lint-clean.
 LINTCLEAN=	6to4relay arp ikeadm in.rlogind in.rshd in.telnetd in.tftpd \
 		ipaddrsel ipsecalgs ipseckey ipsecconf route routeadm \
 		in.rarpd if_mpadm $(SYNCPROG)
 # Likewise, as subdirs get lint-clean, add them here.  Once
 # they're all clean, replace the dependency of the lint target
 # with SUBDIRS.  Also (sigh) deal with the commented-out build lines
 # for the lint rule.
 LINTSUBDIRS=	bootconfchk in.routed in.talkd inetadm inetconv ipqosconf \
 		mipagentstat ping sppptun traceroute wificonfig
 # And as programs are verified not to attempt to write into constants,
 # -xstrconst should be used to ensure they stay that way.
 CONSTCLEAN=	ikeadm

 include ../../Makefile.cmd
 ROOTMANIFESTDIR=	$(ROOTSVCNETWORK)
 $(ROOTMANIFEST)		:= FILEMODE= 444
 include ../Makefile.cmd-inet

 ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%)
 ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%)

 COMMONOBJS=	kcmd.o
 COMMONSRCS=	$(CMDINETCOMMONDIR)/$(COMMONOBJS:.o=.c)
 SRCS+=		$(COMMONSRCS)

 #
 # Message catalog
 #
 POFILES=	6to4relay.po if_mpadm.po ikeadm.po in.comsat.po ipaddrsel.po \
 		ipsecalgs.po ipsecconf.po ipseckey.po route.po routeadm.po
 POFILE=		usr.sbin.po

 all:=		TARGET= all
 install:=	TARGET= install
 clean:=		TARGET= clean
 clobber:=	TARGET= clobber
 lint:=		TARGET= lint
 _msg:=		TARGET= _msg

 CLOBBERFILES +=	$(ROOTFS_PROG) $(PROG)
 CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS)

 CPPFLAGS +=	-DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I.

 include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5
 K5LIBS=

 # Eventually just plain CFLAGS should be += -v, but not until all in
 # PROGS are lint clean.
 $(LINTCLEAN)		:=	CFLAGS += $(CCVERBOSE)
 $(CONSTCLEAN)		:=	CFLAGS += $(XSTRCONST)

 $(SYNCPROG)		:=	LDLIBS += -ldlpi
 $(SOCKETPROG)		:=	LDLIBS += -lsocket
 $(NSLPROG)		:=	LDLIBS += -lnsl
 $(AUDITPROG)		:=	LDLIBS += -lbsm
 $(PAMPROG)		:=	LDLIBS += -lpam
 $(RPCSVCPROG)		:=	LDLIBS += -lrpcsvc
 $(CMDPROG)		:=	LDLIBS += -lcmd
 $(K5PROGS)		:=	LDFLAGS += $(ZLAZYLOAD) $(KRUNPATH) \
 				-L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL)
 $(K5PROGS)		:=	K5LIBS=  -lmech_krb5
 $(K5PROGS)		:=	CPPFLAGS += -I$(SRC)/head \
 				-I$(SRC)/uts/common/ \
 				-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
 				-I$(SRC)/lib/gss_mechs/mech_krb5/include \
 				-I$(SRC)/lib/pam_modules/krb5
 LDLIBS +=	$(K5LIBS)
 $(IPSECUTILPROG)	:=	LDLIBS += -lipsecutil
 $(TSNETPROG)		:=	LDLIBS += -ltsnet

 in.rarpd		:=	LDLIBS += -linetutil
 route			:=	CPPFLAGS += -DNDEBUG

 .KEEP_STATE:

 .PARALLEL:

 all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS)

 #
 # message catalog
 #
 _msg: $(MSGSUBDIRS) $(POFILE)

 syncutil: $(SYNCPROG)

 $(POFILE): $(POFILES)
 	$(RM) $@
 	cat $(POFILES) > $@

 $(COMMONOBJS): $(COMMONSRCS)
 	$(COMPILE.c) $(COMMONSRCS)

 in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS)
 	$(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
 	$(POST_PROCESS)

 in.rshd: $(K5RSHDOBJS) $(COMMONOBJS)
 	$(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
 	$(POST_PROCESS)

 in.tftpd: $(TFTPDOBJS)
 	$(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS)
 	$(POST_PROCESS)

 tftpsubs.o: $(OTHERSRC)
 	$(COMPILE.c) $(OTHERSRC) -o $@
 	$(POST_PROCESS_O)

 $(ROOTUSRSBINLINKS):
 	-$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@

 install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \
 	$(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \
 	$(ROOTMANIFEST)

 #
 # The reason this rule checks for the existence of the
 # Makefile is that some of the directories do not exist
 # in our exportable source builds.
 #
 $(SUBDIRS): FRC
 	@if [ -f $@/Makefile  ]; then \
 		cd $@; pwd; $(MAKE) $(TARGET); \
 	else \
 		true; \
 	fi

 FRC:

 check:	$(CHKMANIFEST)

 clean:	$(SUBDIRS)
 	-$(RM) $(CLEANFILES)

 clobber: $(SUBDIRS)
 	-$(RM) $(CLEANFILES) $(CLOBBERFILES)

 lint: $(LINTSUBDIRS)
 	$(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -lnsl
 	$(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl
 	@# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam
 	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
 		-I$(SRC)/head -I$(SRC)/uts/common/ \
 		-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
 		-I$(SRC)/lib/gss_mechs/mech_krb5/include \
 		-I$(SRC)/lib/pam_modules/krb5 \
 		in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
 	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
 		-I$(SRC)/head -I$(SRC)/uts/common/ \
 		-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
 		-I$(SRC)/lib/gss_mechs/mech_krb5/include \
 		-I$(SRC)/lib/pam_modules/krb5 \
 		in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
 	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \
 		-erroff=E_GLOBAL_COULD_BE_STATIC2 \
 		-I$(SRC)/head -I$(SRC)/uts/common/ \
 		-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
 		-I$(SRC)/lib/gss_mechs/mech_krb5/include \
 		-I$(SRC)/lib/pam_modules/krb5 \
 		in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl
 	$(LINT.c) if_mpadm.c $(LDLIBS) -lsocket -lnsl -lipmp
 	$(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl
 	$(LINT.c) ipsecalgs.c $(LDLIBS) -lsocket -lnsl -lipsecutil
 	$(LINT.c) ipsecconf.c $(LDLIBS) -lsocket -lnsl -lipsecutil
 	$(LINT.c) ipseckey.c $(LDLIBS) -lsocket -lnsl -lipsecutil
 	$(LINT.c) ikeadm.c $(LDLIBS) -lnsl -lipsecutil
 	$(LINT.c) route.c $(LDLIBS) -lsocket -lnsl -ltsnet
 	$(LINT.c) routeadm.c $(LDLIBS) -lsocket
 	$(LINT.c) syncinit.c $(LDLIBS) -ldlpi
 	$(LINT.c) syncloop.c $(LDLIBS) -ldlpi
 	$(LINT.c) syncstat.c $(LDLIBS) -ldlpi
 	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \
 	    -lsocket -lnsl
 	$(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \
 	    -lsocket -lnsl

 # EXPORT DELETE START
 EXPORT_SRC:
 	$(RM) Makefile+
 	sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \
 		< Makefile > Makefile+
 	$(RM) Makefile
 	$(MV) Makefile+ Makefile
 	$(CHMOD) 444 Makefile
 # EXPORT DELETE END
	#
	# CDDL HEADER START
	#
	# The contents of this file are subject to the terms of the
	# Common Development and Distribution License (the "License").
	# You may not use this file except in compliance with the License.
	#
	# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
	# or http://www.opensolaris.org/os/licensing.
	# See the License for the specific language governing permissions
	# and limitations under the License.
	#
	# When distributing Covered Code, include this CDDL HEADER in each
	# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
	# If applicable, add the following below this CDDL HEADER, with the
	# fields enclosed by brackets "[]" replaced with your own identifying
	# information: Portions Copyright [yyyy] [name of copyright owner]
	#
	# CDDL HEADER END


	#
	#
	# Copyright 2006 Sun Microsystems, Inc. All rights reserved.
	# Use is subject to license terms.
	#
	# ident "%Z%%M% %I% %E% SMI"
	#

	SYNCPROG= syncinit syncloop syncstat
	DHCPPROG= dhcpconfig dhtadm pntadm

	# EXPORT DELETE START
	XMODPROG= wanbootutil
	# EXPORT DELETE END

	PROG= 6to4relay arp gettable if_mpadm ikeadm ikecert \
	in.comsat in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind \
	in.rshd in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \
	ipsecalgs ipsecconf ipseckey ndd $(SYNCPROG) $(DHCPPROG) \
	$(XMODPROG)

	MANIFEST= rarp.xml telnet.xml comsat.xml finger.xml \
	login.xml shell.xml rexec.xml tname.xml

	ROOTFS_PROG= hostconfig route routeadm soconfig
	SBINLINKS= hostconfig route routeadm

	RPCSVCPROG= hostconfig
	AUDITPROG= in.rexecd in.rlogind in.rshd in.telnetd
	PAMPROG= in.rexecd in.rlogind in.rshd in.telnetd
	SOCKETPROG= 6to4relay arp gettable hostconfig if_mpadm in.comsat \
	in.fingerd in.rarpd in.rdisc in.rexecd in.rlogind in.rshd \
	in.rwhod in.telnetd in.tftpd in.tnamed ipaddrsel \
	ipsecalgs ipsecconf ipseckey route routeadm
	NSLPROG= 6to4relay arp gettable hostconfig ikeadm in.comsat in.rarpd \
	in.rdisc in.rexecd in.rlogind in.rshd in.rwhod in.telnetd \
	in.tftpd in.tnamed ipaddrsel ipsecalgs ipsecconf ipseckey route
	CMDPROG= in.telnetd
	IPSECUTILPROG= ikeadm ipsecalgs ipsecconf ipseckey
	K5PROGS= in.telnetd in.rlogind in.rshd
	TSNETPROG= route
	DEFAULTFILES= telnetd.dfl

	PROGSRCS= $(PROG:%=%.c)
	TFTPDOBJS= in.tftpd.o tftpsubs.o
	OTHERSRC= ../usr.bin/tftp/tftpsubs.c
	K5RLOGINOBJS= in.rlogind.o
	K5RSHDOBJS= in.rshd.o
	SRCS= $(PROGSRCS) $(OTHERSRC)

	SUBDIRS= bootconfchk htable ifconfig in.ftpd in.routed \
	in.talkd inetadm inetconv ipqosconf kssl/kssladm \
	kssl/ksslcfg mipagentconfig mipagentstat ping snoop \
	sppptun traceroute wificonfig

	MSGSUBDIRS= bootconfchk htable ifconfig in.ftpd in.routed in.talkd \
	inetadm inetconv ipqosconf kssl/ksslcfg mipagentconfig \
	mipagentstat sppptun snoop wificonfig

	# As programs get lint-clean, add them here and to the 'lint' target.
	# Eventually this hack should go away, and all in PROG should be
	# lint-clean.
	LINTCLEAN= 6to4relay arp ikeadm in.rlogind in.rshd in.telnetd in.tftpd \
	ipaddrsel ipsecalgs ipseckey ipsecconf route routeadm \
	in.rarpd if_mpadm $(SYNCPROG)
	# Likewise, as subdirs get lint-clean, add them here. Once
	# they're all clean, replace the dependency of the lint target
	# with SUBDIRS. Also (sigh) deal with the commented-out build lines
	# for the lint rule.
	LINTSUBDIRS= bootconfchk in.routed in.talkd inetadm inetconv ipqosconf \
	mipagentstat ping sppptun traceroute wificonfig
	# And as programs are verified not to attempt to write into constants,
	# -xstrconst should be used to ensure they stay that way.
	CONSTCLEAN= ikeadm

	include ../../Makefile.cmd
	ROOTMANIFESTDIR= $(ROOTSVCNETWORK)
	$(ROOTMANIFEST) := FILEMODE= 444
	include ../Makefile.cmd-inet

	ROOTSBINPROG = $(ROOTFS_PROG:%=$(ROOTSBIN)/%)
	ROOTUSRSBINLINKS = $(SBINLINKS:%=$(ROOTUSRSBIN)/%)

	COMMONOBJS= kcmd.o
	COMMONSRCS= $(CMDINETCOMMONDIR)/$(COMMONOBJS:.o=.c)
	SRCS+= $(COMMONSRCS)

	#
	# Message catalog
	#
	POFILES= 6to4relay.po if_mpadm.po ikeadm.po in.comsat.po ipaddrsel.po \
	ipsecalgs.po ipsecconf.po ipseckey.po route.po routeadm.po
	POFILE= usr.sbin.po

	all:= TARGET= all
	install:= TARGET= install
	clean:= TARGET= clean
	clobber:= TARGET= clobber
	lint:= TARGET= lint
	_msg:= TARGET= _msg

	CLOBBERFILES += $(ROOTFS_PROG) $(PROG)
	CLEANFILES += $(COMMONOBJS) $(K5RLOGINOBJS) $(K5RSHDOBJS) $(TFTPDOBJS)

	CPPFLAGS += -DSYSV -DBSD_COMP -I$(CMDINETCOMMONDIR) -I.

	include $(SRC)/lib/gss_mechs/mech_krb5/Makefile.mech_krb5
	K5LIBS=

	# Eventually just plain CFLAGS should be += -v, but not until all in
	# PROGS are lint clean.
	$(LINTCLEAN) := CFLAGS += $(CCVERBOSE)
	$(CONSTCLEAN) := CFLAGS += $(XSTRCONST)

	$(SYNCPROG) := LDLIBS += -ldlpi
	$(SOCKETPROG) := LDLIBS += -lsocket
	$(NSLPROG) := LDLIBS += -lnsl
	$(AUDITPROG) := LDLIBS += -lbsm
	$(PAMPROG) := LDLIBS += -lpam
	$(RPCSVCPROG) := LDLIBS += -lrpcsvc
	$(CMDPROG) := LDLIBS += -lcmd
	$(K5PROGS) := LDFLAGS += $(ZLAZYLOAD) $(KRUNPATH) \
	-L$(ROOT)$(KLIBDIR_DO) -L$(ROOT)$(KLIBDIR_GL)
	$(K5PROGS) := K5LIBS= -lmech_krb5
	$(K5PROGS) := CPPFLAGS += -I$(SRC)/head \
	-I$(SRC)/uts/common/ \
	-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
	-I$(SRC)/lib/gss_mechs/mech_krb5/include \
	-I$(SRC)/lib/pam_modules/krb5
	LDLIBS += $(K5LIBS)
	$(IPSECUTILPROG) := LDLIBS += -lipsecutil
	$(TSNETPROG) := LDLIBS += -ltsnet

	in.rarpd := LDLIBS += -linetutil
	route := CPPFLAGS += -DNDEBUG

	.KEEP_STATE:

	.PARALLEL:

	all: $(PROG) $(ROOTFS_PROG) $(SUBDIRS)

	#
	# message catalog
	#
	_msg: $(MSGSUBDIRS) $(POFILE)

	syncutil: $(SYNCPROG)

	$(POFILE): $(POFILES)
	$(RM) $@
	cat $(POFILES) > $@

	$(COMMONOBJS): $(COMMONSRCS)
	$(COMPILE.c) $(COMMONSRCS)

	in.rlogind: $(K5RLOGINOBJS) $(COMMONOBJS)
	$(LINK.c) $(K5RLOGINOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
	$(POST_PROCESS)

	in.rshd: $(K5RSHDOBJS) $(COMMONOBJS)
	$(LINK.c) $(K5RSHDOBJS) $(COMMONOBJS) -o $@ $(LDLIBS)
	$(POST_PROCESS)

	in.tftpd: $(TFTPDOBJS)
	$(LINK.c) $(TFTPDOBJS) -o $@ $(LDLIBS)
	$(POST_PROCESS)

	tftpsubs.o: $(OTHERSRC)
	$(COMPILE.c) $(OTHERSRC) -o $@
	$(POST_PROCESS_O)

	$(ROOTUSRSBINLINKS):
	-$(RM) $@; $(SYMLINK) ../../sbin/$(@F) $@

	install: $(PROG) $(ROOTFS_PROG) $(SUBDIRS) .WAIT $(ROOTUSRSBINPROG) \
	$(ROOTSBINPROG) $(ROOTUSRSBINLINKS) $(ROOTETCDEFAULTFILES) \
	$(ROOTMANIFEST)

	#
	# The reason this rule checks for the existence of the
	# Makefile is that some of the directories do not exist
	# in our exportable source builds.
	#
	$(SUBDIRS): FRC
	@if [ -f $@/Makefile ]; then \
	cd $@; pwd; $(MAKE) $(TARGET); \
	else \
	true; \
	fi

	FRC:

	check: $(CHKMANIFEST)

	clean: $(SUBDIRS)
	-$(RM) $(CLEANFILES)

	clobber: $(SUBDIRS)
	-$(RM) $(CLEANFILES) $(CLOBBERFILES)

	lint: $(LINTSUBDIRS)
	$(LINT.c) 6to4relay.c $(LDLIBS) -lsocket -lnsl
	$(LINT.c) arp.c $(LDLIBS) -lsocket -lnsl
	@# $(LINT.c) in.rexecd.c $(LDLIBS) -lbsm -lpam
	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
	-I$(SRC)/head -I$(SRC)/uts/common/ \
	-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
	-I$(SRC)/lib/gss_mechs/mech_krb5/include \
	-I$(SRC)/lib/pam_modules/krb5 \
	in.rlogind.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 -erroff=E_NAME_DEF_NOT_USED2 \
	-I$(SRC)/head -I$(SRC)/uts/common/ \
	-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
	-I$(SRC)/lib/gss_mechs/mech_krb5/include \
	-I$(SRC)/lib/pam_modules/krb5 \
	in.rshd.c $(COMMONSRCS) $(LDLIBS) -lbsm -lpam -lsocket -lnsl
	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 \
	-erroff=E_GLOBAL_COULD_BE_STATIC2 \
	-I$(SRC)/head -I$(SRC)/uts/common/ \
	-I$(SRC)/uts/common/gssapi/mechs/krb5/include \
	-I$(SRC)/lib/gss_mechs/mech_krb5/include \
	-I$(SRC)/lib/pam_modules/krb5 \
	in.telnetd.c $(LDLIBS) -lbsm -lpam -lsocket -lnsl
	$(LINT.c) if_mpadm.c $(LDLIBS) -lsocket -lnsl -lipmp
	$(LINT.c) ipaddrsel.c $(LDLIBS) -lsocket -lnsl
	$(LINT.c) ipsecalgs.c $(LDLIBS) -lsocket -lnsl -lipsecutil
	$(LINT.c) ipsecconf.c $(LDLIBS) -lsocket -lnsl -lipsecutil
	$(LINT.c) ipseckey.c $(LDLIBS) -lsocket -lnsl -lipsecutil
	$(LINT.c) ikeadm.c $(LDLIBS) -lnsl -lipsecutil
	$(LINT.c) route.c $(LDLIBS) -lsocket -lnsl -ltsnet
	$(LINT.c) routeadm.c $(LDLIBS) -lsocket
	$(LINT.c) syncinit.c $(LDLIBS) -ldlpi
	$(LINT.c) syncloop.c $(LDLIBS) -ldlpi
	$(LINT.c) syncstat.c $(LDLIBS) -ldlpi
	$(LINT.c) -erroff=E_NAME_USED_NOT_DEF2 in.rarpd.c $(LDLIBS) \
	-lsocket -lnsl
	$(LINT.c) in.tftpd.c ../usr.bin/tftp/tftpsubs.c $(LDLIBS) \
	-lsocket -lnsl

	# EXPORT DELETE START
	EXPORT_SRC:
	$(RM) Makefile+
	sed -e "/^# EXPORT DELETE START/,/^# EXPORT DELETE END/d" \
	< Makefile > Makefile+
	$(RM) Makefile
	$(MV) Makefile+ Makefile
	$(CHMOD) 444 Makefile
	# EXPORT DELETE END