| /******************************************************************************* |
| * |
| * Module Name: nseval - Object evaluation, includes control method execution |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <contrib/dev/acpica/include/acpi.h> |
| #include <contrib/dev/acpica/include/accommon.h> |
| #include <contrib/dev/acpica/include/acparser.h> |
| #include <contrib/dev/acpica/include/acinterp.h> |
| #include <contrib/dev/acpica/include/acnamesp.h> |
| |
| |
| #define _COMPONENT ACPI_NAMESPACE |
| ACPI_MODULE_NAME ("nseval") |
| |
| /* Local prototypes */ |
| |
| static void |
| AcpiNsExecModuleCode ( |
| ACPI_OPERAND_OBJECT *MethodObj, |
| ACPI_EVALUATE_INFO *Info); |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiNsEvaluate |
| * |
| * PARAMETERS: Info - Evaluation info block, contains these fields |
| * and more: |
| * PrefixNode - Prefix or Method/Object Node to execute |
| * RelativePath - Name of method to execute, If NULL, the |
| * Node is the object to execute |
| * Parameters - List of parameters to pass to the method, |
| * terminated by NULL. Params itself may be |
| * NULL if no parameters are being passed. |
| * ParameterType - Type of Parameter list |
| * ReturnObject - Where to put method's return value (if |
| * any). If NULL, no value is returned. |
| * Flags - ACPI_IGNORE_RETURN_VALUE to delete return |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Execute a control method or return the current value of an |
| * ACPI namespace object. |
| * |
| * MUTEX: Locks interpreter |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiNsEvaluate ( |
| ACPI_EVALUATE_INFO *Info) |
| { |
| ACPI_STATUS Status; |
| |
| |
| ACPI_FUNCTION_TRACE (NsEvaluate); |
| |
| |
| if (!Info) |
| { |
| return_ACPI_STATUS (AE_BAD_PARAMETER); |
| } |
| |
| if (!Info->Node) |
| { |
| /* |
| * Get the actual namespace node for the target object if we |
| * need to. Handles these cases: |
| * |
| * 1) Null node, valid pathname from root (absolute path) |
| * 2) Node and valid pathname (path relative to Node) |
| * 3) Node, Null pathname |
| */ |
| Status = AcpiNsGetNode (Info->PrefixNode, Info->RelativePathname, |
| ACPI_NS_NO_UPSEARCH, &Info->Node); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| /* |
| * For a method alias, we must grab the actual method node so that |
| * proper scoping context will be established before execution. |
| */ |
| if (AcpiNsGetType (Info->Node) == ACPI_TYPE_LOCAL_METHOD_ALIAS) |
| { |
| Info->Node = ACPI_CAST_PTR ( |
| ACPI_NAMESPACE_NODE, Info->Node->Object); |
| } |
| |
| /* Complete the info block initialization */ |
| |
| Info->ReturnObject = NULL; |
| Info->NodeFlags = Info->Node->Flags; |
| Info->ObjDesc = AcpiNsGetAttachedObject (Info->Node); |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_NAMES, "%s [%p] Value %p\n", |
| Info->RelativePathname, Info->Node, |
| AcpiNsGetAttachedObject (Info->Node))); |
| |
| /* Get info if we have a predefined name (_HID, etc.) */ |
| |
| Info->Predefined = AcpiUtMatchPredefinedMethod (Info->Node->Name.Ascii); |
| |
| /* Get the full pathname to the object, for use in warning messages */ |
| |
| Info->FullPathname = AcpiNsGetExternalPathname (Info->Node); |
| if (!Info->FullPathname) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| /* Count the number of arguments being passed in */ |
| |
| Info->ParamCount = 0; |
| if (Info->Parameters) |
| { |
| while (Info->Parameters[Info->ParamCount]) |
| { |
| Info->ParamCount++; |
| } |
| |
| /* Warn on impossible argument count */ |
| |
| if (Info->ParamCount > ACPI_METHOD_NUM_ARGS) |
| { |
| ACPI_WARN_PREDEFINED ((AE_INFO, Info->FullPathname, ACPI_WARN_ALWAYS, |
| "Excess arguments (%u) - using only %u", |
| Info->ParamCount, ACPI_METHOD_NUM_ARGS)); |
| |
| Info->ParamCount = ACPI_METHOD_NUM_ARGS; |
| } |
| } |
| |
| /* |
| * For predefined names: Check that the declared argument count |
| * matches the ACPI spec -- otherwise this is a BIOS error. |
| */ |
| AcpiNsCheckAcpiCompliance (Info->FullPathname, Info->Node, |
| Info->Predefined); |
| |
| /* |
| * For all names: Check that the incoming argument count for |
| * this method/object matches the actual ASL/AML definition. |
| */ |
| AcpiNsCheckArgumentCount (Info->FullPathname, Info->Node, |
| Info->ParamCount, Info->Predefined); |
| |
| /* For predefined names: Typecheck all incoming arguments */ |
| |
| AcpiNsCheckArgumentTypes (Info); |
| |
| /* |
| * Three major evaluation cases: |
| * |
| * 1) Object types that cannot be evaluated by definition |
| * 2) The object is a control method -- execute it |
| * 3) The object is not a method -- just return it's current value |
| */ |
| switch (AcpiNsGetType (Info->Node)) |
| { |
| case ACPI_TYPE_DEVICE: |
| case ACPI_TYPE_EVENT: |
| case ACPI_TYPE_MUTEX: |
| case ACPI_TYPE_REGION: |
| case ACPI_TYPE_THERMAL: |
| case ACPI_TYPE_LOCAL_SCOPE: |
| /* |
| * 1) Disallow evaluation of certain object types. For these, |
| * object evaluation is undefined and not supported. |
| */ |
| ACPI_ERROR ((AE_INFO, |
| "%s: Evaluation of object type [%s] is not supported", |
| Info->FullPathname, |
| AcpiUtGetTypeName (Info->Node->Type))); |
| |
| Status = AE_TYPE; |
| goto Cleanup; |
| |
| case ACPI_TYPE_METHOD: |
| /* |
| * 2) Object is a control method - execute it |
| */ |
| |
| /* Verify that there is a method object associated with this node */ |
| |
| if (!Info->ObjDesc) |
| { |
| ACPI_ERROR ((AE_INFO, "%s: Method has no attached sub-object", |
| Info->FullPathname)); |
| Status = AE_NULL_OBJECT; |
| goto Cleanup; |
| } |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, |
| "**** Execute method [%s] at AML address %p length %X\n", |
| Info->FullPathname, |
| Info->ObjDesc->Method.AmlStart + 1, |
| Info->ObjDesc->Method.AmlLength - 1)); |
| |
| /* |
| * Any namespace deletion must acquire both the namespace and |
| * interpreter locks to ensure that no thread is using the portion of |
| * the namespace that is being deleted. |
| * |
| * Execute the method via the interpreter. The interpreter is locked |
| * here before calling into the AML parser |
| */ |
| AcpiExEnterInterpreter (); |
| Status = AcpiPsExecuteMethod (Info); |
| AcpiExExitInterpreter (); |
| break; |
| |
| default: |
| /* |
| * 3) All other non-method objects -- get the current object value |
| */ |
| |
| /* |
| * Some objects require additional resolution steps (e.g., the Node |
| * may be a field that must be read, etc.) -- we can't just grab |
| * the object out of the node. |
| * |
| * Use ResolveNodeToValue() to get the associated value. |
| * |
| * NOTE: we can get away with passing in NULL for a walk state because |
| * the Node is guaranteed to not be a reference to either a method |
| * local or a method argument (because this interface is never called |
| * from a running method.) |
| * |
| * Even though we do not directly invoke the interpreter for object |
| * resolution, we must lock it because we could access an OpRegion. |
| * The OpRegion access code assumes that the interpreter is locked. |
| */ |
| AcpiExEnterInterpreter (); |
| |
| /* TBD: ResolveNodeToValue has a strange interface, fix */ |
| |
| Info->ReturnObject = ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, Info->Node); |
| |
| Status = AcpiExResolveNodeToValue (ACPI_CAST_INDIRECT_PTR ( |
| ACPI_NAMESPACE_NODE, &Info->ReturnObject), NULL); |
| AcpiExExitInterpreter (); |
| |
| if (ACPI_FAILURE (Status)) |
| { |
| Info->ReturnObject = NULL; |
| goto Cleanup; |
| } |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_NAMES, "Returned object %p [%s]\n", |
| Info->ReturnObject, |
| AcpiUtGetObjectTypeName (Info->ReturnObject))); |
| |
| Status = AE_CTRL_RETURN_VALUE; /* Always has a "return value" */ |
| break; |
| } |
| |
| /* |
| * For predefined names, check the return value against the ACPI |
| * specification. Some incorrect return value types are repaired. |
| */ |
| (void) AcpiNsCheckReturnValue (Info->Node, Info, Info->ParamCount, |
| Status, &Info->ReturnObject); |
| |
| /* Check if there is a return value that must be dealt with */ |
| |
| if (Status == AE_CTRL_RETURN_VALUE) |
| { |
| /* If caller does not want the return value, delete it */ |
| |
| if (Info->Flags & ACPI_IGNORE_RETURN_VALUE) |
| { |
| AcpiUtRemoveReference (Info->ReturnObject); |
| Info->ReturnObject = NULL; |
| } |
| |
| /* Map AE_CTRL_RETURN_VALUE to AE_OK, we are done with it */ |
| |
| Status = AE_OK; |
| } |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_NAMES, |
| "*** Completed evaluation of object %s ***\n", |
| Info->RelativePathname)); |
| |
| Cleanup: |
| /* |
| * Namespace was unlocked by the handling AcpiNs* function, so we |
| * just free the pathname and return |
| */ |
| ACPI_FREE (Info->FullPathname); |
| Info->FullPathname = NULL; |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiNsExecModuleCodeList |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: None. Exceptions during method execution are ignored, since |
| * we cannot abort a table load. |
| * |
| * DESCRIPTION: Execute all elements of the global module-level code list. |
| * Each element is executed as a single control method. |
| * |
| ******************************************************************************/ |
| |
| void |
| AcpiNsExecModuleCodeList ( |
| void) |
| { |
| ACPI_OPERAND_OBJECT *Prev; |
| ACPI_OPERAND_OBJECT *Next; |
| ACPI_EVALUATE_INFO *Info; |
| UINT32 MethodCount = 0; |
| |
| |
| ACPI_FUNCTION_TRACE (NsExecModuleCodeList); |
| |
| |
| /* Exit now if the list is empty */ |
| |
| Next = AcpiGbl_ModuleCodeList; |
| if (!Next) |
| { |
| return_VOID; |
| } |
| |
| /* Allocate the evaluation information block */ |
| |
| Info = ACPI_ALLOCATE (sizeof (ACPI_EVALUATE_INFO)); |
| if (!Info) |
| { |
| return_VOID; |
| } |
| |
| /* Walk the list, executing each "method" */ |
| |
| while (Next) |
| { |
| Prev = Next; |
| Next = Next->Method.Mutex; |
| |
| /* Clear the link field and execute the method */ |
| |
| Prev->Method.Mutex = NULL; |
| AcpiNsExecModuleCode (Prev, Info); |
| MethodCount++; |
| |
| /* Delete the (temporary) method object */ |
| |
| AcpiUtRemoveReference (Prev); |
| } |
| |
| ACPI_INFO ((AE_INFO, |
| "Executed %u blocks of module-level executable AML code", |
| MethodCount)); |
| |
| ACPI_FREE (Info); |
| AcpiGbl_ModuleCodeList = NULL; |
| return_VOID; |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiNsExecModuleCode |
| * |
| * PARAMETERS: MethodObj - Object container for the module-level code |
| * Info - Info block for method evaluation |
| * |
| * RETURN: None. Exceptions during method execution are ignored, since |
| * we cannot abort a table load. |
| * |
| * DESCRIPTION: Execute a control method containing a block of module-level |
| * executable AML code. The control method is temporarily |
| * installed to the root node, then evaluated. |
| * |
| ******************************************************************************/ |
| |
| static void |
| AcpiNsExecModuleCode ( |
| ACPI_OPERAND_OBJECT *MethodObj, |
| ACPI_EVALUATE_INFO *Info) |
| { |
| ACPI_OPERAND_OBJECT *ParentObj; |
| ACPI_NAMESPACE_NODE *ParentNode; |
| ACPI_OBJECT_TYPE Type; |
| ACPI_STATUS Status; |
| |
| |
| ACPI_FUNCTION_TRACE (NsExecModuleCode); |
| |
| |
| /* |
| * Get the parent node. We cheat by using the NextObject field |
| * of the method object descriptor. |
| */ |
| ParentNode = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, |
| MethodObj->Method.NextObject); |
| Type = AcpiNsGetType (ParentNode); |
| |
| /* |
| * Get the region handler and save it in the method object. We may need |
| * this if an operation region declaration causes a _REG method to be run. |
| * |
| * We can't do this in AcpiPsLinkModuleCode because |
| * AcpiGbl_RootNode->Object is NULL at PASS1. |
| */ |
| if ((Type == ACPI_TYPE_DEVICE) && ParentNode->Object) |
| { |
| MethodObj->Method.Dispatch.Handler = |
| ParentNode->Object->Device.Handler; |
| } |
| |
| /* Must clear NextObject (AcpiNsAttachObject needs the field) */ |
| |
| MethodObj->Method.NextObject = NULL; |
| |
| /* Initialize the evaluation information block */ |
| |
| memset (Info, 0, sizeof (ACPI_EVALUATE_INFO)); |
| Info->PrefixNode = ParentNode; |
| |
| /* |
| * Get the currently attached parent object. Add a reference, because the |
| * ref count will be decreased when the method object is installed to |
| * the parent node. |
| */ |
| ParentObj = AcpiNsGetAttachedObject (ParentNode); |
| if (ParentObj) |
| { |
| AcpiUtAddReference (ParentObj); |
| } |
| |
| /* Install the method (module-level code) in the parent node */ |
| |
| Status = AcpiNsAttachObject (ParentNode, MethodObj, |
| ACPI_TYPE_METHOD); |
| if (ACPI_FAILURE (Status)) |
| { |
| goto Exit; |
| } |
| |
| /* Execute the parent node as a control method */ |
| |
| Status = AcpiNsEvaluate (Info); |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_INIT_NAMES, |
| "Executed module-level code at %p\n", |
| MethodObj->Method.AmlStart)); |
| |
| /* Delete a possible implicit return value (in slack mode) */ |
| |
| if (Info->ReturnObject) |
| { |
| AcpiUtRemoveReference (Info->ReturnObject); |
| } |
| |
| /* Detach the temporary method object */ |
| |
| AcpiNsDetachObject (ParentNode); |
| |
| /* Restore the original parent object */ |
| |
| if (ParentObj) |
| { |
| Status = AcpiNsAttachObject (ParentNode, ParentObj, Type); |
| } |
| else |
| { |
| ParentNode->Type = (UINT8) Type; |
| } |
| |
| Exit: |
| if (ParentObj) |
| { |
| AcpiUtRemoveReference (ParentObj); |
| } |
| return_VOID; |
| } |