| /****************************************************************************** |
| * |
| * Module Name: exprep - ACPI AML (p-code) execution - field prep utilities |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <contrib/dev/acpica/include/acpi.h> |
| #include <contrib/dev/acpica/include/accommon.h> |
| #include <contrib/dev/acpica/include/acinterp.h> |
| #include <contrib/dev/acpica/include/amlcode.h> |
| #include <contrib/dev/acpica/include/acnamesp.h> |
| #include <contrib/dev/acpica/include/acdispat.h> |
| |
| |
| #define _COMPONENT ACPI_EXECUTER |
| ACPI_MODULE_NAME ("exprep") |
| |
| /* Local prototypes */ |
| |
| static UINT32 |
| AcpiExDecodeFieldAccess ( |
| ACPI_OPERAND_OBJECT *ObjDesc, |
| UINT8 FieldFlags, |
| UINT32 *ReturnByteAlignment); |
| |
| |
| #ifdef ACPI_UNDER_DEVELOPMENT |
| |
| static UINT32 |
| AcpiExGenerateAccess ( |
| UINT32 FieldBitOffset, |
| UINT32 FieldBitLength, |
| UINT32 RegionLength); |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExGenerateAccess |
| * |
| * PARAMETERS: FieldBitOffset - Start of field within parent region/buffer |
| * FieldBitLength - Length of field in bits |
| * RegionLength - Length of parent in bytes |
| * |
| * RETURN: Field granularity (8, 16, 32 or 64) and |
| * ByteAlignment (1, 2, 3, or 4) |
| * |
| * DESCRIPTION: Generate an optimal access width for fields defined with the |
| * AnyAcc keyword. |
| * |
| * NOTE: Need to have the RegionLength in order to check for boundary |
| * conditions (end-of-region). However, the RegionLength is a deferred |
| * operation. Therefore, to complete this implementation, the generation |
| * of this access width must be deferred until the region length has |
| * been evaluated. |
| * |
| ******************************************************************************/ |
| |
| static UINT32 |
| AcpiExGenerateAccess ( |
| UINT32 FieldBitOffset, |
| UINT32 FieldBitLength, |
| UINT32 RegionLength) |
| { |
| UINT32 FieldByteLength; |
| UINT32 FieldByteOffset; |
| UINT32 FieldByteEndOffset; |
| UINT32 AccessByteWidth; |
| UINT32 FieldStartOffset; |
| UINT32 FieldEndOffset; |
| UINT32 MinimumAccessWidth = 0xFFFFFFFF; |
| UINT32 MinimumAccesses = 0xFFFFFFFF; |
| UINT32 Accesses; |
| |
| |
| ACPI_FUNCTION_TRACE (ExGenerateAccess); |
| |
| |
| /* Round Field start offset and length to "minimal" byte boundaries */ |
| |
| FieldByteOffset = ACPI_DIV_8 (ACPI_ROUND_DOWN (FieldBitOffset, 8)); |
| FieldByteEndOffset = ACPI_DIV_8 (ACPI_ROUND_UP (FieldBitLength + |
| FieldBitOffset, 8)); |
| FieldByteLength = FieldByteEndOffset - FieldByteOffset; |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "Bit length %u, Bit offset %u\n", |
| FieldBitLength, FieldBitOffset)); |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "Byte Length %u, Byte Offset %u, End Offset %u\n", |
| FieldByteLength, FieldByteOffset, FieldByteEndOffset)); |
| |
| /* |
| * Iterative search for the maximum access width that is both aligned |
| * and does not go beyond the end of the region |
| * |
| * Start at ByteAcc and work upwards to QwordAcc max. (1,2,4,8 bytes) |
| */ |
| for (AccessByteWidth = 1; AccessByteWidth <= 8; AccessByteWidth <<= 1) |
| { |
| /* |
| * 1) Round end offset up to next access boundary and make sure that |
| * this does not go beyond the end of the parent region. |
| * 2) When the Access width is greater than the FieldByteLength, we |
| * are done. (This does not optimize for the perfectly aligned |
| * case yet). |
| */ |
| if (ACPI_ROUND_UP (FieldByteEndOffset, AccessByteWidth) <= RegionLength) |
| { |
| FieldStartOffset = |
| ACPI_ROUND_DOWN (FieldByteOffset, AccessByteWidth) / |
| AccessByteWidth; |
| |
| FieldEndOffset = |
| ACPI_ROUND_UP ((FieldByteLength + FieldByteOffset), |
| AccessByteWidth) / AccessByteWidth; |
| |
| Accesses = FieldEndOffset - FieldStartOffset; |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "AccessWidth %u end is within region\n", AccessByteWidth)); |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "Field Start %u, Field End %u -- requires %u accesses\n", |
| FieldStartOffset, FieldEndOffset, Accesses)); |
| |
| /* Single access is optimal */ |
| |
| if (Accesses <= 1) |
| { |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "Entire field can be accessed with one operation of size %u\n", |
| AccessByteWidth)); |
| return_VALUE (AccessByteWidth); |
| } |
| |
| /* |
| * Fits in the region, but requires more than one read/write. |
| * try the next wider access on next iteration |
| */ |
| if (Accesses < MinimumAccesses) |
| { |
| MinimumAccesses = Accesses; |
| MinimumAccessWidth = AccessByteWidth; |
| } |
| } |
| else |
| { |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "AccessWidth %u end is NOT within region\n", AccessByteWidth)); |
| if (AccessByteWidth == 1) |
| { |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "Field goes beyond end-of-region!\n")); |
| |
| /* Field does not fit in the region at all */ |
| |
| return_VALUE (0); |
| } |
| |
| /* |
| * This width goes beyond the end-of-region, back off to |
| * previous access |
| */ |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "Backing off to previous optimal access width of %u\n", |
| MinimumAccessWidth)); |
| return_VALUE (MinimumAccessWidth); |
| } |
| } |
| |
| /* |
| * Could not read/write field with one operation, |
| * just use max access width |
| */ |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "Cannot access field in one operation, using width 8\n")); |
| return_VALUE (8); |
| } |
| #endif /* ACPI_UNDER_DEVELOPMENT */ |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExDecodeFieldAccess |
| * |
| * PARAMETERS: ObjDesc - Field object |
| * FieldFlags - Encoded fieldflags (contains access bits) |
| * ReturnByteAlignment - Where the byte alignment is returned |
| * |
| * RETURN: Field granularity (8, 16, 32 or 64) and |
| * ByteAlignment (1, 2, 3, or 4) |
| * |
| * DESCRIPTION: Decode the AccessType bits of a field definition. |
| * |
| ******************************************************************************/ |
| |
| static UINT32 |
| AcpiExDecodeFieldAccess ( |
| ACPI_OPERAND_OBJECT *ObjDesc, |
| UINT8 FieldFlags, |
| UINT32 *ReturnByteAlignment) |
| { |
| UINT32 Access; |
| UINT32 ByteAlignment; |
| UINT32 BitLength; |
| |
| |
| ACPI_FUNCTION_TRACE (ExDecodeFieldAccess); |
| |
| |
| Access = (FieldFlags & AML_FIELD_ACCESS_TYPE_MASK); |
| |
| switch (Access) |
| { |
| case AML_FIELD_ACCESS_ANY: |
| |
| #ifdef ACPI_UNDER_DEVELOPMENT |
| ByteAlignment = |
| AcpiExGenerateAccess (ObjDesc->CommonField.StartFieldBitOffset, |
| ObjDesc->CommonField.BitLength, |
| 0xFFFFFFFF /* Temp until we pass RegionLength as parameter */); |
| BitLength = ByteAlignment * 8; |
| #endif |
| |
| ByteAlignment = 1; |
| BitLength = 8; |
| break; |
| |
| case AML_FIELD_ACCESS_BYTE: |
| case AML_FIELD_ACCESS_BUFFER: /* ACPI 2.0 (SMBus Buffer) */ |
| |
| ByteAlignment = 1; |
| BitLength = 8; |
| break; |
| |
| case AML_FIELD_ACCESS_WORD: |
| |
| ByteAlignment = 2; |
| BitLength = 16; |
| break; |
| |
| case AML_FIELD_ACCESS_DWORD: |
| |
| ByteAlignment = 4; |
| BitLength = 32; |
| break; |
| |
| case AML_FIELD_ACCESS_QWORD: /* ACPI 2.0 */ |
| |
| ByteAlignment = 8; |
| BitLength = 64; |
| break; |
| |
| default: |
| |
| /* Invalid field access type */ |
| |
| ACPI_ERROR ((AE_INFO, |
| "Unknown field access type 0x%X", |
| Access)); |
| return_UINT32 (0); |
| } |
| |
| if (ObjDesc->Common.Type == ACPI_TYPE_BUFFER_FIELD) |
| { |
| /* |
| * BufferField access can be on any byte boundary, so the |
| * ByteAlignment is always 1 byte -- regardless of any ByteAlignment |
| * implied by the field access type. |
| */ |
| ByteAlignment = 1; |
| } |
| |
| *ReturnByteAlignment = ByteAlignment; |
| return_UINT32 (BitLength); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExPrepCommonFieldObject |
| * |
| * PARAMETERS: ObjDesc - The field object |
| * FieldFlags - Access, LockRule, and UpdateRule. |
| * The format of a FieldFlag is described |
| * in the ACPI specification |
| * FieldAttribute - Special attributes (not used) |
| * FieldBitPosition - Field start position |
| * FieldBitLength - Field length in number of bits |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Initialize the areas of the field object that are common |
| * to the various types of fields. Note: This is very "sensitive" |
| * code because we are solving the general case for field |
| * alignment. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiExPrepCommonFieldObject ( |
| ACPI_OPERAND_OBJECT *ObjDesc, |
| UINT8 FieldFlags, |
| UINT8 FieldAttribute, |
| UINT32 FieldBitPosition, |
| UINT32 FieldBitLength) |
| { |
| UINT32 AccessBitWidth; |
| UINT32 ByteAlignment; |
| UINT32 NearestByteAddress; |
| |
| |
| ACPI_FUNCTION_TRACE (ExPrepCommonFieldObject); |
| |
| |
| /* |
| * Note: the structure being initialized is the |
| * ACPI_COMMON_FIELD_INFO; No structure fields outside of the common |
| * area are initialized by this procedure. |
| */ |
| ObjDesc->CommonField.FieldFlags = FieldFlags; |
| ObjDesc->CommonField.Attribute = FieldAttribute; |
| ObjDesc->CommonField.BitLength = FieldBitLength; |
| |
| /* |
| * Decode the access type so we can compute offsets. The access type gives |
| * two pieces of information - the width of each field access and the |
| * necessary ByteAlignment (address granularity) of the access. |
| * |
| * For AnyAcc, the AccessBitWidth is the largest width that is both |
| * necessary and possible in an attempt to access the whole field in one |
| * I/O operation. However, for AnyAcc, the ByteAlignment is always one |
| * byte. |
| * |
| * For all Buffer Fields, the ByteAlignment is always one byte. |
| * |
| * For all other access types (Byte, Word, Dword, Qword), the Bitwidth is |
| * the same (equivalent) as the ByteAlignment. |
| */ |
| AccessBitWidth = AcpiExDecodeFieldAccess (ObjDesc, FieldFlags, |
| &ByteAlignment); |
| if (!AccessBitWidth) |
| { |
| return_ACPI_STATUS (AE_AML_OPERAND_VALUE); |
| } |
| |
| /* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */ |
| |
| ObjDesc->CommonField.AccessByteWidth = (UINT8) |
| ACPI_DIV_8 (AccessBitWidth); |
| |
| /* |
| * BaseByteOffset is the address of the start of the field within the |
| * region. It is the byte address of the first *datum* (field-width data |
| * unit) of the field. (i.e., the first datum that contains at least the |
| * first *bit* of the field.) |
| * |
| * Note: ByteAlignment is always either equal to the AccessBitWidth or 8 |
| * (Byte access), and it defines the addressing granularity of the parent |
| * region or buffer. |
| */ |
| NearestByteAddress = |
| ACPI_ROUND_BITS_DOWN_TO_BYTES (FieldBitPosition); |
| ObjDesc->CommonField.BaseByteOffset = (UINT32) |
| ACPI_ROUND_DOWN (NearestByteAddress, ByteAlignment); |
| |
| /* |
| * StartFieldBitOffset is the offset of the first bit of the field within |
| * a field datum. |
| */ |
| ObjDesc->CommonField.StartFieldBitOffset = (UINT8) |
| (FieldBitPosition - ACPI_MUL_8 (ObjDesc->CommonField.BaseByteOffset)); |
| |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExPrepFieldValue |
| * |
| * PARAMETERS: Info - Contains all field creation info |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Construct an object of type ACPI_OPERAND_OBJECT with a |
| * subtype of DefField and connect it to the parent Node. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiExPrepFieldValue ( |
| ACPI_CREATE_FIELD_INFO *Info) |
| { |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| ACPI_OPERAND_OBJECT *SecondDesc = NULL; |
| ACPI_STATUS Status; |
| UINT32 AccessByteWidth; |
| UINT32 Type; |
| |
| |
| ACPI_FUNCTION_TRACE (ExPrepFieldValue); |
| |
| |
| /* Parameter validation */ |
| |
| if (Info->FieldType != ACPI_TYPE_LOCAL_INDEX_FIELD) |
| { |
| if (!Info->RegionNode) |
| { |
| ACPI_ERROR ((AE_INFO, "Null RegionNode")); |
| return_ACPI_STATUS (AE_AML_NO_OPERAND); |
| } |
| |
| Type = AcpiNsGetType (Info->RegionNode); |
| if (Type != ACPI_TYPE_REGION) |
| { |
| ACPI_ERROR ((AE_INFO, "Needed Region, found type 0x%X (%s)", |
| Type, AcpiUtGetTypeName (Type))); |
| |
| return_ACPI_STATUS (AE_AML_OPERAND_TYPE); |
| } |
| } |
| |
| /* Allocate a new field object */ |
| |
| ObjDesc = AcpiUtCreateInternalObject (Info->FieldType); |
| if (!ObjDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| /* Initialize areas of the object that are common to all fields */ |
| |
| ObjDesc->CommonField.Node = Info->FieldNode; |
| Status = AcpiExPrepCommonFieldObject (ObjDesc, |
| Info->FieldFlags, Info->Attribute, |
| Info->FieldBitPosition, Info->FieldBitLength); |
| if (ACPI_FAILURE (Status)) |
| { |
| AcpiUtDeleteObjectDesc (ObjDesc); |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Initialize areas of the object that are specific to the field type */ |
| |
| switch (Info->FieldType) |
| { |
| case ACPI_TYPE_LOCAL_REGION_FIELD: |
| |
| ObjDesc->Field.RegionObj = AcpiNsGetAttachedObject (Info->RegionNode); |
| |
| /* Fields specific to GenericSerialBus fields */ |
| |
| ObjDesc->Field.AccessLength = Info->AccessLength; |
| |
| if (Info->ConnectionNode) |
| { |
| SecondDesc = Info->ConnectionNode->Object; |
| if (!(SecondDesc->Common.Flags & AOPOBJ_DATA_VALID)) |
| { |
| Status = AcpiDsGetBufferArguments (SecondDesc); |
| if (ACPI_FAILURE (Status)) |
| { |
| AcpiUtDeleteObjectDesc (ObjDesc); |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| ObjDesc->Field.ResourceBuffer = SecondDesc->Buffer.Pointer; |
| ObjDesc->Field.ResourceLength = (UINT16) SecondDesc->Buffer.Length; |
| } |
| else if (Info->ResourceBuffer) |
| { |
| ObjDesc->Field.ResourceBuffer = Info->ResourceBuffer; |
| ObjDesc->Field.ResourceLength = Info->ResourceLength; |
| } |
| |
| ObjDesc->Field.PinNumberIndex = Info->PinNumberIndex; |
| |
| /* Allow full data read from EC address space */ |
| |
| if ((ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_EC) && |
| (ObjDesc->CommonField.BitLength > 8)) |
| { |
| AccessByteWidth = ACPI_ROUND_BITS_UP_TO_BYTES ( |
| ObjDesc->CommonField.BitLength); |
| |
| /* Maximum byte width supported is 255 */ |
| |
| if (AccessByteWidth < 256) |
| { |
| ObjDesc->CommonField.AccessByteWidth = (UINT8) AccessByteWidth; |
| } |
| } |
| |
| /* An additional reference for the container */ |
| |
| AcpiUtAddReference (ObjDesc->Field.RegionObj); |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n", |
| ObjDesc->Field.StartFieldBitOffset, ObjDesc->Field.BaseByteOffset, |
| ObjDesc->Field.AccessByteWidth, ObjDesc->Field.RegionObj)); |
| break; |
| |
| case ACPI_TYPE_LOCAL_BANK_FIELD: |
| |
| ObjDesc->BankField.Value = Info->BankValue; |
| ObjDesc->BankField.RegionObj = |
| AcpiNsGetAttachedObject (Info->RegionNode); |
| ObjDesc->BankField.BankObj = |
| AcpiNsGetAttachedObject (Info->RegisterNode); |
| |
| /* An additional reference for the attached objects */ |
| |
| AcpiUtAddReference (ObjDesc->BankField.RegionObj); |
| AcpiUtAddReference (ObjDesc->BankField.BankObj); |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n", |
| ObjDesc->BankField.StartFieldBitOffset, |
| ObjDesc->BankField.BaseByteOffset, |
| ObjDesc->Field.AccessByteWidth, |
| ObjDesc->BankField.RegionObj, |
| ObjDesc->BankField.BankObj)); |
| |
| /* |
| * Remember location in AML stream of the field unit |
| * opcode and operands -- since the BankValue |
| * operands must be evaluated. |
| */ |
| SecondDesc = ObjDesc->Common.NextObject; |
| SecondDesc->Extra.AmlStart = ACPI_CAST_PTR (ACPI_PARSE_OBJECT, |
| Info->DataRegisterNode)->Named.Data; |
| SecondDesc->Extra.AmlLength = ACPI_CAST_PTR (ACPI_PARSE_OBJECT, |
| Info->DataRegisterNode)->Named.Length; |
| |
| break; |
| |
| case ACPI_TYPE_LOCAL_INDEX_FIELD: |
| |
| /* Get the Index and Data registers */ |
| |
| ObjDesc->IndexField.IndexObj = |
| AcpiNsGetAttachedObject (Info->RegisterNode); |
| ObjDesc->IndexField.DataObj = |
| AcpiNsGetAttachedObject (Info->DataRegisterNode); |
| |
| if (!ObjDesc->IndexField.DataObj || !ObjDesc->IndexField.IndexObj) |
| { |
| ACPI_ERROR ((AE_INFO, "Null Index Object during field prep")); |
| AcpiUtDeleteObjectDesc (ObjDesc); |
| return_ACPI_STATUS (AE_AML_INTERNAL); |
| } |
| |
| /* An additional reference for the attached objects */ |
| |
| AcpiUtAddReference (ObjDesc->IndexField.DataObj); |
| AcpiUtAddReference (ObjDesc->IndexField.IndexObj); |
| |
| /* |
| * April 2006: Changed to match MS behavior |
| * |
| * The value written to the Index register is the byte offset of the |
| * target field in units of the granularity of the IndexField |
| * |
| * Previously, the value was calculated as an index in terms of the |
| * width of the Data register, as below: |
| * |
| * ObjDesc->IndexField.Value = (UINT32) |
| * (Info->FieldBitPosition / ACPI_MUL_8 ( |
| * ObjDesc->Field.AccessByteWidth)); |
| * |
| * February 2006: Tried value as a byte offset: |
| * ObjDesc->IndexField.Value = (UINT32) |
| * ACPI_DIV_8 (Info->FieldBitPosition); |
| */ |
| ObjDesc->IndexField.Value = (UINT32) ACPI_ROUND_DOWN ( |
| ACPI_DIV_8 (Info->FieldBitPosition), |
| ObjDesc->IndexField.AccessByteWidth); |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, |
| "IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n", |
| ObjDesc->IndexField.StartFieldBitOffset, |
| ObjDesc->IndexField.BaseByteOffset, |
| ObjDesc->IndexField.Value, |
| ObjDesc->Field.AccessByteWidth, |
| ObjDesc->IndexField.IndexObj, |
| ObjDesc->IndexField.DataObj)); |
| break; |
| |
| default: |
| |
| /* No other types should get here */ |
| |
| break; |
| } |
| |
| /* |
| * Store the constructed descriptor (ObjDesc) into the parent Node, |
| * preserving the current type of that NamedObj. |
| */ |
| Status = AcpiNsAttachObject (Info->FieldNode, ObjDesc, |
| AcpiNsGetType (Info->FieldNode)); |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Set NamedObj %p [%4.4s], ObjDesc %p\n", |
| Info->FieldNode, AcpiUtGetNodeName (Info->FieldNode), ObjDesc)); |
| |
| /* Remove local reference to the object */ |
| |
| AcpiUtRemoveReference (ObjDesc); |
| return_ACPI_STATUS (Status); |
| } |