| /****************************************************************************** |
| * |
| * Module Name: exconvrt - Object conversion routines |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <contrib/dev/acpica/include/acpi.h> |
| #include <contrib/dev/acpica/include/accommon.h> |
| #include <contrib/dev/acpica/include/acinterp.h> |
| #include <contrib/dev/acpica/include/amlcode.h> |
| |
| |
| #define _COMPONENT ACPI_EXECUTER |
| ACPI_MODULE_NAME ("exconvrt") |
| |
| /* Local prototypes */ |
| |
| static UINT32 |
| AcpiExConvertToAscii ( |
| UINT64 Integer, |
| UINT16 Base, |
| UINT8 *String, |
| UINT8 MaxLength); |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExConvertToInteger |
| * |
| * PARAMETERS: ObjDesc - Object to be converted. Must be an |
| * Integer, Buffer, or String |
| * ResultDesc - Where the new Integer object is returned |
| * Flags - Used for string conversion |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Convert an ACPI Object to an integer. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiExConvertToInteger ( |
| ACPI_OPERAND_OBJECT *ObjDesc, |
| ACPI_OPERAND_OBJECT **ResultDesc, |
| UINT32 Flags) |
| { |
| ACPI_OPERAND_OBJECT *ReturnDesc; |
| UINT8 *Pointer; |
| UINT64 Result; |
| UINT32 i; |
| UINT32 Count; |
| ACPI_STATUS Status; |
| |
| |
| ACPI_FUNCTION_TRACE_PTR (ExConvertToInteger, ObjDesc); |
| |
| |
| switch (ObjDesc->Common.Type) |
| { |
| case ACPI_TYPE_INTEGER: |
| |
| /* No conversion necessary */ |
| |
| *ResultDesc = ObjDesc; |
| return_ACPI_STATUS (AE_OK); |
| |
| case ACPI_TYPE_BUFFER: |
| case ACPI_TYPE_STRING: |
| |
| /* Note: Takes advantage of common buffer/string fields */ |
| |
| Pointer = ObjDesc->Buffer.Pointer; |
| Count = ObjDesc->Buffer.Length; |
| break; |
| |
| default: |
| |
| return_ACPI_STATUS (AE_TYPE); |
| } |
| |
| /* |
| * Convert the buffer/string to an integer. Note that both buffers and |
| * strings are treated as raw data - we don't convert ascii to hex for |
| * strings. |
| * |
| * There are two terminating conditions for the loop: |
| * 1) The size of an integer has been reached, or |
| * 2) The end of the buffer or string has been reached |
| */ |
| Result = 0; |
| |
| /* String conversion is different than Buffer conversion */ |
| |
| switch (ObjDesc->Common.Type) |
| { |
| case ACPI_TYPE_STRING: |
| /* |
| * Convert string to an integer - for most cases, the string must be |
| * hexadecimal as per the ACPI specification. The only exception (as |
| * of ACPI 3.0) is that the ToInteger() operator allows both decimal |
| * and hexadecimal strings (hex prefixed with "0x"). |
| */ |
| Status = AcpiUtStrtoul64 ((char *) Pointer, Flags, &Result); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| break; |
| |
| case ACPI_TYPE_BUFFER: |
| |
| /* Check for zero-length buffer */ |
| |
| if (!Count) |
| { |
| return_ACPI_STATUS (AE_AML_BUFFER_LIMIT); |
| } |
| |
| /* Transfer no more than an integer's worth of data */ |
| |
| if (Count > AcpiGbl_IntegerByteWidth) |
| { |
| Count = AcpiGbl_IntegerByteWidth; |
| } |
| |
| /* |
| * Convert buffer to an integer - we simply grab enough raw data |
| * from the buffer to fill an integer |
| */ |
| for (i = 0; i < Count; i++) |
| { |
| /* |
| * Get next byte and shift it into the Result. |
| * Little endian is used, meaning that the first byte of the buffer |
| * is the LSB of the integer |
| */ |
| Result |= (((UINT64) Pointer[i]) << (i * 8)); |
| } |
| break; |
| |
| default: |
| |
| /* No other types can get here */ |
| |
| break; |
| } |
| |
| /* Create a new integer */ |
| |
| ReturnDesc = AcpiUtCreateIntegerObject (Result); |
| if (!ReturnDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n", |
| ACPI_FORMAT_UINT64 (Result))); |
| |
| /* Save the Result */ |
| |
| (void) AcpiExTruncateFor32bitTable (ReturnDesc); |
| *ResultDesc = ReturnDesc; |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExConvertToBuffer |
| * |
| * PARAMETERS: ObjDesc - Object to be converted. Must be an |
| * Integer, Buffer, or String |
| * ResultDesc - Where the new buffer object is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Convert an ACPI Object to a Buffer |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiExConvertToBuffer ( |
| ACPI_OPERAND_OBJECT *ObjDesc, |
| ACPI_OPERAND_OBJECT **ResultDesc) |
| { |
| ACPI_OPERAND_OBJECT *ReturnDesc; |
| UINT8 *NewBuf; |
| |
| |
| ACPI_FUNCTION_TRACE_PTR (ExConvertToBuffer, ObjDesc); |
| |
| |
| switch (ObjDesc->Common.Type) |
| { |
| case ACPI_TYPE_BUFFER: |
| |
| /* No conversion necessary */ |
| |
| *ResultDesc = ObjDesc; |
| return_ACPI_STATUS (AE_OK); |
| |
| |
| case ACPI_TYPE_INTEGER: |
| /* |
| * Create a new Buffer object. |
| * Need enough space for one integer |
| */ |
| ReturnDesc = AcpiUtCreateBufferObject (AcpiGbl_IntegerByteWidth); |
| if (!ReturnDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| /* Copy the integer to the buffer, LSB first */ |
| |
| NewBuf = ReturnDesc->Buffer.Pointer; |
| memcpy (NewBuf, |
| &ObjDesc->Integer.Value, |
| AcpiGbl_IntegerByteWidth); |
| break; |
| |
| case ACPI_TYPE_STRING: |
| /* |
| * Create a new Buffer object |
| * Size will be the string length |
| * |
| * NOTE: Add one to the string length to include the null terminator. |
| * The ACPI spec is unclear on this subject, but there is existing |
| * ASL/AML code that depends on the null being transferred to the new |
| * buffer. |
| */ |
| ReturnDesc = AcpiUtCreateBufferObject ( |
| (ACPI_SIZE) ObjDesc->String.Length + 1); |
| if (!ReturnDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| /* Copy the string to the buffer */ |
| |
| NewBuf = ReturnDesc->Buffer.Pointer; |
| strncpy ((char *) NewBuf, (char *) ObjDesc->String.Pointer, |
| ObjDesc->String.Length); |
| break; |
| |
| default: |
| |
| return_ACPI_STATUS (AE_TYPE); |
| } |
| |
| /* Mark buffer initialized */ |
| |
| ReturnDesc->Common.Flags |= AOPOBJ_DATA_VALID; |
| *ResultDesc = ReturnDesc; |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExConvertToAscii |
| * |
| * PARAMETERS: Integer - Value to be converted |
| * Base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX |
| * String - Where the string is returned |
| * DataWidth - Size of data item to be converted, in bytes |
| * |
| * RETURN: Actual string length |
| * |
| * DESCRIPTION: Convert an ACPI Integer to a hex or decimal string |
| * |
| ******************************************************************************/ |
| |
| static UINT32 |
| AcpiExConvertToAscii ( |
| UINT64 Integer, |
| UINT16 Base, |
| UINT8 *String, |
| UINT8 DataWidth) |
| { |
| UINT64 Digit; |
| UINT32 i; |
| UINT32 j; |
| UINT32 k = 0; |
| UINT32 HexLength; |
| UINT32 DecimalLength; |
| UINT32 Remainder; |
| BOOLEAN SupressZeros; |
| |
| |
| ACPI_FUNCTION_ENTRY (); |
| |
| |
| switch (Base) |
| { |
| case 10: |
| |
| /* Setup max length for the decimal number */ |
| |
| switch (DataWidth) |
| { |
| case 1: |
| |
| DecimalLength = ACPI_MAX8_DECIMAL_DIGITS; |
| break; |
| |
| case 4: |
| |
| DecimalLength = ACPI_MAX32_DECIMAL_DIGITS; |
| break; |
| |
| case 8: |
| default: |
| |
| DecimalLength = ACPI_MAX64_DECIMAL_DIGITS; |
| break; |
| } |
| |
| SupressZeros = TRUE; /* No leading zeros */ |
| Remainder = 0; |
| |
| for (i = DecimalLength; i > 0; i--) |
| { |
| /* Divide by nth factor of 10 */ |
| |
| Digit = Integer; |
| for (j = 0; j < i; j++) |
| { |
| (void) AcpiUtShortDivide (Digit, 10, &Digit, &Remainder); |
| } |
| |
| /* Handle leading zeros */ |
| |
| if (Remainder != 0) |
| { |
| SupressZeros = FALSE; |
| } |
| |
| if (!SupressZeros) |
| { |
| String[k] = (UINT8) (ACPI_ASCII_ZERO + Remainder); |
| k++; |
| } |
| } |
| break; |
| |
| case 16: |
| |
| /* HexLength: 2 ascii hex chars per data byte */ |
| |
| HexLength = ACPI_MUL_2 (DataWidth); |
| for (i = 0, j = (HexLength-1); i < HexLength; i++, j--) |
| { |
| /* Get one hex digit, most significant digits first */ |
| |
| String[k] = (UINT8) AcpiUtHexToAsciiChar (Integer, ACPI_MUL_4 (j)); |
| k++; |
| } |
| break; |
| |
| default: |
| return (0); |
| } |
| |
| /* |
| * Since leading zeros are suppressed, we must check for the case where |
| * the integer equals 0 |
| * |
| * Finally, null terminate the string and return the length |
| */ |
| if (!k) |
| { |
| String [0] = ACPI_ASCII_ZERO; |
| k = 1; |
| } |
| |
| String [k] = 0; |
| return ((UINT32) k); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExConvertToString |
| * |
| * PARAMETERS: ObjDesc - Object to be converted. Must be an |
| * Integer, Buffer, or String |
| * ResultDesc - Where the string object is returned |
| * Type - String flags (base and conversion type) |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Convert an ACPI Object to a string |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiExConvertToString ( |
| ACPI_OPERAND_OBJECT *ObjDesc, |
| ACPI_OPERAND_OBJECT **ResultDesc, |
| UINT32 Type) |
| { |
| ACPI_OPERAND_OBJECT *ReturnDesc; |
| UINT8 *NewBuf; |
| UINT32 i; |
| UINT32 StringLength = 0; |
| UINT16 Base = 16; |
| UINT8 Separator = ','; |
| |
| |
| ACPI_FUNCTION_TRACE_PTR (ExConvertToString, ObjDesc); |
| |
| |
| switch (ObjDesc->Common.Type) |
| { |
| case ACPI_TYPE_STRING: |
| |
| /* No conversion necessary */ |
| |
| *ResultDesc = ObjDesc; |
| return_ACPI_STATUS (AE_OK); |
| |
| case ACPI_TYPE_INTEGER: |
| |
| switch (Type) |
| { |
| case ACPI_EXPLICIT_CONVERT_DECIMAL: |
| |
| /* Make room for maximum decimal number */ |
| |
| StringLength = ACPI_MAX_DECIMAL_DIGITS; |
| Base = 10; |
| break; |
| |
| default: |
| |
| /* Two hex string characters for each integer byte */ |
| |
| StringLength = ACPI_MUL_2 (AcpiGbl_IntegerByteWidth); |
| break; |
| } |
| |
| /* |
| * Create a new String |
| * Need enough space for one ASCII integer (plus null terminator) |
| */ |
| ReturnDesc = AcpiUtCreateStringObject ((ACPI_SIZE) StringLength); |
| if (!ReturnDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| NewBuf = ReturnDesc->Buffer.Pointer; |
| |
| /* Convert integer to string */ |
| |
| StringLength = AcpiExConvertToAscii (ObjDesc->Integer.Value, Base, |
| NewBuf, AcpiGbl_IntegerByteWidth); |
| |
| /* Null terminate at the correct place */ |
| |
| ReturnDesc->String.Length = StringLength; |
| NewBuf [StringLength] = 0; |
| break; |
| |
| case ACPI_TYPE_BUFFER: |
| |
| /* Setup string length, base, and separator */ |
| |
| switch (Type) |
| { |
| case ACPI_EXPLICIT_CONVERT_DECIMAL: /* Used by ToDecimalString */ |
| /* |
| * From ACPI: "If Data is a buffer, it is converted to a string of |
| * decimal values separated by commas." |
| */ |
| Base = 10; |
| |
| /* |
| * Calculate the final string length. Individual string values |
| * are variable length (include separator for each) |
| */ |
| for (i = 0; i < ObjDesc->Buffer.Length; i++) |
| { |
| if (ObjDesc->Buffer.Pointer[i] >= 100) |
| { |
| StringLength += 4; |
| } |
| else if (ObjDesc->Buffer.Pointer[i] >= 10) |
| { |
| StringLength += 3; |
| } |
| else |
| { |
| StringLength += 2; |
| } |
| } |
| break; |
| |
| case ACPI_IMPLICIT_CONVERT_HEX: |
| /* |
| * From the ACPI spec: |
| *"The entire contents of the buffer are converted to a string of |
| * two-character hexadecimal numbers, each separated by a space." |
| */ |
| Separator = ' '; |
| StringLength = (ObjDesc->Buffer.Length * 3); |
| break; |
| |
| case ACPI_EXPLICIT_CONVERT_HEX: /* Used by ToHexString */ |
| /* |
| * From ACPI: "If Data is a buffer, it is converted to a string of |
| * hexadecimal values separated by commas." |
| */ |
| StringLength = (ObjDesc->Buffer.Length * 3); |
| break; |
| |
| default: |
| return_ACPI_STATUS (AE_BAD_PARAMETER); |
| } |
| |
| /* |
| * Create a new string object and string buffer |
| * (-1 because of extra separator included in StringLength from above) |
| * Allow creation of zero-length strings from zero-length buffers. |
| */ |
| if (StringLength) |
| { |
| StringLength--; |
| } |
| |
| ReturnDesc = AcpiUtCreateStringObject ((ACPI_SIZE) StringLength); |
| if (!ReturnDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| NewBuf = ReturnDesc->Buffer.Pointer; |
| |
| /* |
| * Convert buffer bytes to hex or decimal values |
| * (separated by commas or spaces) |
| */ |
| for (i = 0; i < ObjDesc->Buffer.Length; i++) |
| { |
| NewBuf += AcpiExConvertToAscii ( |
| (UINT64) ObjDesc->Buffer.Pointer[i], Base, |
| NewBuf, 1); |
| *NewBuf++ = Separator; /* each separated by a comma or space */ |
| } |
| |
| /* |
| * Null terminate the string |
| * (overwrites final comma/space from above) |
| */ |
| if (ObjDesc->Buffer.Length) |
| { |
| NewBuf--; |
| } |
| *NewBuf = 0; |
| break; |
| |
| default: |
| |
| return_ACPI_STATUS (AE_TYPE); |
| } |
| |
| *ResultDesc = ReturnDesc; |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExConvertToTargetType |
| * |
| * PARAMETERS: DestinationType - Current type of the destination |
| * SourceDesc - Source object to be converted. |
| * ResultDesc - Where the converted object is returned |
| * WalkState - Current method state |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Implements "implicit conversion" rules for storing an object. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiExConvertToTargetType ( |
| ACPI_OBJECT_TYPE DestinationType, |
| ACPI_OPERAND_OBJECT *SourceDesc, |
| ACPI_OPERAND_OBJECT **ResultDesc, |
| ACPI_WALK_STATE *WalkState) |
| { |
| ACPI_STATUS Status = AE_OK; |
| |
| |
| ACPI_FUNCTION_TRACE (ExConvertToTargetType); |
| |
| |
| /* Default behavior */ |
| |
| *ResultDesc = SourceDesc; |
| |
| /* |
| * If required by the target, |
| * perform implicit conversion on the source before we store it. |
| */ |
| switch (GET_CURRENT_ARG_TYPE (WalkState->OpInfo->RuntimeArgs)) |
| { |
| case ARGI_SIMPLE_TARGET: |
| case ARGI_FIXED_TARGET: |
| case ARGI_INTEGER_REF: /* Handles Increment, Decrement cases */ |
| |
| switch (DestinationType) |
| { |
| case ACPI_TYPE_LOCAL_REGION_FIELD: |
| /* |
| * Named field can always handle conversions |
| */ |
| break; |
| |
| default: |
| |
| /* No conversion allowed for these types */ |
| |
| if (DestinationType != SourceDesc->Common.Type) |
| { |
| ACPI_DEBUG_PRINT ((ACPI_DB_INFO, |
| "Explicit operator, will store (%s) over existing type (%s)\n", |
| AcpiUtGetObjectTypeName (SourceDesc), |
| AcpiUtGetTypeName (DestinationType))); |
| Status = AE_TYPE; |
| } |
| } |
| break; |
| |
| case ARGI_TARGETREF: |
| |
| switch (DestinationType) |
| { |
| case ACPI_TYPE_INTEGER: |
| case ACPI_TYPE_BUFFER_FIELD: |
| case ACPI_TYPE_LOCAL_BANK_FIELD: |
| case ACPI_TYPE_LOCAL_INDEX_FIELD: |
| /* |
| * These types require an Integer operand. We can convert |
| * a Buffer or a String to an Integer if necessary. |
| */ |
| Status = AcpiExConvertToInteger (SourceDesc, ResultDesc, |
| 16); |
| break; |
| |
| case ACPI_TYPE_STRING: |
| /* |
| * The operand must be a String. We can convert an |
| * Integer or Buffer if necessary |
| */ |
| Status = AcpiExConvertToString (SourceDesc, ResultDesc, |
| ACPI_IMPLICIT_CONVERT_HEX); |
| break; |
| |
| case ACPI_TYPE_BUFFER: |
| /* |
| * The operand must be a Buffer. We can convert an |
| * Integer or String if necessary |
| */ |
| Status = AcpiExConvertToBuffer (SourceDesc, ResultDesc); |
| break; |
| |
| default: |
| |
| ACPI_ERROR ((AE_INFO, "Bad destination type during conversion: 0x%X", |
| DestinationType)); |
| Status = AE_AML_INTERNAL; |
| break; |
| } |
| break; |
| |
| case ARGI_REFERENCE: |
| /* |
| * CreateXxxxField cases - we are storing the field object into the name |
| */ |
| break; |
| |
| default: |
| |
| ACPI_ERROR ((AE_INFO, |
| "Unknown Target type ID 0x%X AmlOpcode 0x%X DestType %s", |
| GET_CURRENT_ARG_TYPE (WalkState->OpInfo->RuntimeArgs), |
| WalkState->Opcode, AcpiUtGetTypeName (DestinationType))); |
| Status = AE_AML_INTERNAL; |
| } |
| |
| /* |
| * Source-to-Target conversion semantics: |
| * |
| * If conversion to the target type cannot be performed, then simply |
| * overwrite the target with the new object and type. |
| */ |
| if (Status == AE_TYPE) |
| { |
| Status = AE_OK; |
| } |
| |
| return_ACPI_STATUS (Status); |
| } |