| /****************************************************************************** |
| * |
| * Module Name: exconfig - Namespace reconfiguration (Load/Unload opcodes) |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <contrib/dev/acpica/include/acpi.h> |
| #include <contrib/dev/acpica/include/accommon.h> |
| #include <contrib/dev/acpica/include/acinterp.h> |
| #include <contrib/dev/acpica/include/acnamesp.h> |
| #include <contrib/dev/acpica/include/actables.h> |
| #include <contrib/dev/acpica/include/acdispat.h> |
| #include <contrib/dev/acpica/include/acevents.h> |
| #include <contrib/dev/acpica/include/amlcode.h> |
| |
| |
| #define _COMPONENT ACPI_EXECUTER |
| ACPI_MODULE_NAME ("exconfig") |
| |
| /* Local prototypes */ |
| |
| static ACPI_STATUS |
| AcpiExAddTable ( |
| UINT32 TableIndex, |
| ACPI_NAMESPACE_NODE *ParentNode, |
| ACPI_OPERAND_OBJECT **DdbHandle); |
| |
| static ACPI_STATUS |
| AcpiExRegionRead ( |
| ACPI_OPERAND_OBJECT *ObjDesc, |
| UINT32 Length, |
| UINT8 *Buffer); |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExAddTable |
| * |
| * PARAMETERS: Table - Pointer to raw table |
| * ParentNode - Where to load the table (scope) |
| * DdbHandle - Where to return the table handle. |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Common function to Install and Load an ACPI table with a |
| * returned table handle. |
| * |
| ******************************************************************************/ |
| |
| static ACPI_STATUS |
| AcpiExAddTable ( |
| UINT32 TableIndex, |
| ACPI_NAMESPACE_NODE *ParentNode, |
| ACPI_OPERAND_OBJECT **DdbHandle) |
| { |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| ACPI_STATUS Status; |
| ACPI_OWNER_ID OwnerId; |
| |
| |
| ACPI_FUNCTION_TRACE (ExAddTable); |
| |
| |
| /* Create an object to be the table handle */ |
| |
| ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_LOCAL_REFERENCE); |
| if (!ObjDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| /* Init the table handle */ |
| |
| ObjDesc->Common.Flags |= AOPOBJ_DATA_VALID; |
| ObjDesc->Reference.Class = ACPI_REFCLASS_TABLE; |
| *DdbHandle = ObjDesc; |
| |
| /* Install the new table into the local data structures */ |
| |
| ObjDesc->Reference.Value = TableIndex; |
| |
| /* Add the table to the namespace */ |
| |
| Status = AcpiNsLoadTable (TableIndex, ParentNode); |
| if (ACPI_FAILURE (Status)) |
| { |
| AcpiUtRemoveReference (ObjDesc); |
| *DdbHandle = NULL; |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Execute any module-level code that was found in the table */ |
| |
| AcpiExExitInterpreter (); |
| AcpiNsExecModuleCodeList (); |
| AcpiExEnterInterpreter (); |
| |
| /* |
| * Update GPEs for any new _Lxx/_Exx methods. Ignore errors. The host is |
| * responsible for discovering any new wake GPEs by running _PRW methods |
| * that may have been loaded by this table. |
| */ |
| Status = AcpiTbGetOwnerId (TableIndex, &OwnerId); |
| if (ACPI_SUCCESS (Status)) |
| { |
| AcpiEvUpdateGpes (OwnerId); |
| } |
| |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExLoadTableOp |
| * |
| * PARAMETERS: WalkState - Current state with operands |
| * ReturnDesc - Where to store the return object |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Load an ACPI table from the RSDT/XSDT |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiExLoadTableOp ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_OPERAND_OBJECT **ReturnDesc) |
| { |
| ACPI_STATUS Status; |
| ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0]; |
| ACPI_NAMESPACE_NODE *ParentNode; |
| ACPI_NAMESPACE_NODE *StartNode; |
| ACPI_NAMESPACE_NODE *ParameterNode = NULL; |
| ACPI_OPERAND_OBJECT *DdbHandle; |
| ACPI_TABLE_HEADER *Table; |
| UINT32 TableIndex; |
| |
| |
| ACPI_FUNCTION_TRACE (ExLoadTableOp); |
| |
| |
| /* Find the ACPI table in the RSDT/XSDT */ |
| |
| Status = AcpiTbFindTable ( |
| Operand[0]->String.Pointer, |
| Operand[1]->String.Pointer, |
| Operand[2]->String.Pointer, &TableIndex); |
| if (ACPI_FAILURE (Status)) |
| { |
| if (Status != AE_NOT_FOUND) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Table not found, return an Integer=0 and AE_OK */ |
| |
| DdbHandle = AcpiUtCreateIntegerObject ((UINT64) 0); |
| if (!DdbHandle) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| *ReturnDesc = DdbHandle; |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| /* Default nodes */ |
| |
| StartNode = WalkState->ScopeInfo->Scope.Node; |
| ParentNode = AcpiGbl_RootNode; |
| |
| /* RootPath (optional parameter) */ |
| |
| if (Operand[3]->String.Length > 0) |
| { |
| /* |
| * Find the node referenced by the RootPathString. This is the |
| * location within the namespace where the table will be loaded. |
| */ |
| Status = AcpiNsGetNode (StartNode, Operand[3]->String.Pointer, |
| ACPI_NS_SEARCH_PARENT, &ParentNode); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| /* ParameterPath (optional parameter) */ |
| |
| if (Operand[4]->String.Length > 0) |
| { |
| if ((Operand[4]->String.Pointer[0] != AML_ROOT_PREFIX) && |
| (Operand[4]->String.Pointer[0] != AML_PARENT_PREFIX)) |
| { |
| /* |
| * Path is not absolute, so it will be relative to the node |
| * referenced by the RootPathString (or the NS root if omitted) |
| */ |
| StartNode = ParentNode; |
| } |
| |
| /* Find the node referenced by the ParameterPathString */ |
| |
| Status = AcpiNsGetNode (StartNode, Operand[4]->String.Pointer, |
| ACPI_NS_SEARCH_PARENT, &ParameterNode); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| /* Load the table into the namespace */ |
| |
| Status = AcpiExAddTable (TableIndex, ParentNode, &DdbHandle); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Parameter Data (optional) */ |
| |
| if (ParameterNode) |
| { |
| /* Store the parameter data into the optional parameter object */ |
| |
| Status = AcpiExStore (Operand[5], |
| ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, ParameterNode), |
| WalkState); |
| if (ACPI_FAILURE (Status)) |
| { |
| (void) AcpiExUnloadTable (DdbHandle); |
| |
| AcpiUtRemoveReference (DdbHandle); |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| Status = AcpiGetTableByIndex (TableIndex, &Table); |
| if (ACPI_SUCCESS (Status)) |
| { |
| ACPI_INFO ((AE_INFO, "Dynamic OEM Table Load:")); |
| AcpiTbPrintTableHeader (0, Table); |
| } |
| |
| /* Invoke table handler if present */ |
| |
| if (AcpiGbl_TableHandler) |
| { |
| (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_LOAD, Table, |
| AcpiGbl_TableHandlerContext); |
| } |
| |
| *ReturnDesc = DdbHandle; |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExRegionRead |
| * |
| * PARAMETERS: ObjDesc - Region descriptor |
| * Length - Number of bytes to read |
| * Buffer - Pointer to where to put the data |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Read data from an operation region. The read starts from the |
| * beginning of the region. |
| * |
| ******************************************************************************/ |
| |
| static ACPI_STATUS |
| AcpiExRegionRead ( |
| ACPI_OPERAND_OBJECT *ObjDesc, |
| UINT32 Length, |
| UINT8 *Buffer) |
| { |
| ACPI_STATUS Status; |
| UINT64 Value; |
| UINT32 RegionOffset = 0; |
| UINT32 i; |
| |
| |
| /* Bytewise reads */ |
| |
| for (i = 0; i < Length; i++) |
| { |
| Status = AcpiEvAddressSpaceDispatch (ObjDesc, NULL, ACPI_READ, |
| RegionOffset, 8, &Value); |
| if (ACPI_FAILURE (Status)) |
| { |
| return (Status); |
| } |
| |
| *Buffer = (UINT8) Value; |
| Buffer++; |
| RegionOffset++; |
| } |
| |
| return (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExLoadOp |
| * |
| * PARAMETERS: ObjDesc - Region or Buffer/Field where the table will be |
| * obtained |
| * Target - Where a handle to the table will be stored |
| * WalkState - Current state |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Load an ACPI table from a field or operation region |
| * |
| * NOTE: Region Fields (Field, BankField, IndexFields) are resolved to buffer |
| * objects before this code is reached. |
| * |
| * If source is an operation region, it must refer to SystemMemory, as |
| * per the ACPI specification. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiExLoadOp ( |
| ACPI_OPERAND_OBJECT *ObjDesc, |
| ACPI_OPERAND_OBJECT *Target, |
| ACPI_WALK_STATE *WalkState) |
| { |
| ACPI_OPERAND_OBJECT *DdbHandle; |
| ACPI_TABLE_HEADER *TableHeader; |
| ACPI_TABLE_HEADER *Table; |
| UINT32 TableIndex; |
| ACPI_STATUS Status; |
| UINT32 Length; |
| |
| |
| ACPI_FUNCTION_TRACE (ExLoadOp); |
| |
| |
| /* Source Object can be either an OpRegion or a Buffer/Field */ |
| |
| switch (ObjDesc->Common.Type) |
| { |
| case ACPI_TYPE_REGION: |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, |
| "Load table from Region %p\n", ObjDesc)); |
| |
| /* Region must be SystemMemory (from ACPI spec) */ |
| |
| if (ObjDesc->Region.SpaceId != ACPI_ADR_SPACE_SYSTEM_MEMORY) |
| { |
| return_ACPI_STATUS (AE_AML_OPERAND_TYPE); |
| } |
| |
| /* |
| * If the Region Address and Length have not been previously evaluated, |
| * evaluate them now and save the results. |
| */ |
| if (!(ObjDesc->Common.Flags & AOPOBJ_DATA_VALID)) |
| { |
| Status = AcpiDsGetRegionArguments (ObjDesc); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| /* Get the table header first so we can get the table length */ |
| |
| TableHeader = ACPI_ALLOCATE (sizeof (ACPI_TABLE_HEADER)); |
| if (!TableHeader) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| Status = AcpiExRegionRead (ObjDesc, sizeof (ACPI_TABLE_HEADER), |
| ACPI_CAST_PTR (UINT8, TableHeader)); |
| Length = TableHeader->Length; |
| ACPI_FREE (TableHeader); |
| |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Must have at least an ACPI table header */ |
| |
| if (Length < sizeof (ACPI_TABLE_HEADER)) |
| { |
| return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH); |
| } |
| |
| /* |
| * The original implementation simply mapped the table, with no copy. |
| * However, the memory region is not guaranteed to remain stable and |
| * we must copy the table to a local buffer. For example, the memory |
| * region is corrupted after suspend on some machines. Dynamically |
| * loaded tables are usually small, so this overhead is minimal. |
| * |
| * The latest implementation (5/2009) does not use a mapping at all. |
| * We use the low-level operation region interface to read the table |
| * instead of the obvious optimization of using a direct mapping. |
| * This maintains a consistent use of operation regions across the |
| * entire subsystem. This is important if additional processing must |
| * be performed in the (possibly user-installed) operation region |
| * handler. For example, AcpiExec and ASLTS depend on this. |
| */ |
| |
| /* Allocate a buffer for the table */ |
| |
| Table = ACPI_ALLOCATE (Length); |
| if (!Table) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| /* Read the entire table */ |
| |
| Status = AcpiExRegionRead (ObjDesc, Length, |
| ACPI_CAST_PTR (UINT8, Table)); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_FREE (Table); |
| return_ACPI_STATUS (Status); |
| } |
| break; |
| |
| case ACPI_TYPE_BUFFER: /* Buffer or resolved RegionField */ |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, |
| "Load table from Buffer or Field %p\n", ObjDesc)); |
| |
| /* Must have at least an ACPI table header */ |
| |
| if (ObjDesc->Buffer.Length < sizeof (ACPI_TABLE_HEADER)) |
| { |
| return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH); |
| } |
| |
| /* Get the actual table length from the table header */ |
| |
| TableHeader = ACPI_CAST_PTR (ACPI_TABLE_HEADER, ObjDesc->Buffer.Pointer); |
| Length = TableHeader->Length; |
| |
| /* Table cannot extend beyond the buffer */ |
| |
| if (Length > ObjDesc->Buffer.Length) |
| { |
| return_ACPI_STATUS (AE_AML_BUFFER_LIMIT); |
| } |
| if (Length < sizeof (ACPI_TABLE_HEADER)) |
| { |
| return_ACPI_STATUS (AE_INVALID_TABLE_LENGTH); |
| } |
| |
| /* |
| * Copy the table from the buffer because the buffer could be modified |
| * or even deleted in the future |
| */ |
| Table = ACPI_ALLOCATE (Length); |
| if (!Table) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| memcpy (Table, TableHeader, Length); |
| break; |
| |
| default: |
| |
| return_ACPI_STATUS (AE_AML_OPERAND_TYPE); |
| } |
| |
| /* Install the new table into the local data structures */ |
| |
| ACPI_INFO ((AE_INFO, "Dynamic OEM Table Load:")); |
| (void) AcpiUtAcquireMutex (ACPI_MTX_TABLES); |
| |
| Status = AcpiTbInstallStandardTable (ACPI_PTR_TO_PHYSADDR (Table), |
| ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL, TRUE, TRUE, |
| &TableIndex); |
| |
| (void) AcpiUtReleaseMutex (ACPI_MTX_TABLES); |
| if (ACPI_FAILURE (Status)) |
| { |
| /* Delete allocated table buffer */ |
| |
| ACPI_FREE (Table); |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* |
| * Note: Now table is "INSTALLED", it must be validated before |
| * loading. |
| */ |
| Status = AcpiTbValidateTable (&AcpiGbl_RootTableList.Tables[TableIndex]); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* |
| * Add the table to the namespace. |
| * |
| * Note: Load the table objects relative to the root of the namespace. |
| * This appears to go against the ACPI specification, but we do it for |
| * compatibility with other ACPI implementations. |
| */ |
| Status = AcpiExAddTable (TableIndex, AcpiGbl_RootNode, &DdbHandle); |
| if (ACPI_FAILURE (Status)) |
| { |
| /* On error, TablePtr was deallocated above */ |
| |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Store the DdbHandle into the Target operand */ |
| |
| Status = AcpiExStore (DdbHandle, Target, WalkState); |
| if (ACPI_FAILURE (Status)) |
| { |
| (void) AcpiExUnloadTable (DdbHandle); |
| |
| /* TablePtr was deallocated above */ |
| |
| AcpiUtRemoveReference (DdbHandle); |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Remove the reference by added by AcpiExStore above */ |
| |
| AcpiUtRemoveReference (DdbHandle); |
| |
| /* Invoke table handler if present */ |
| |
| if (AcpiGbl_TableHandler) |
| { |
| (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_LOAD, Table, |
| AcpiGbl_TableHandlerContext); |
| } |
| |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiExUnloadTable |
| * |
| * PARAMETERS: DdbHandle - Handle to a previously loaded table |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Unload an ACPI table |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiExUnloadTable ( |
| ACPI_OPERAND_OBJECT *DdbHandle) |
| { |
| ACPI_STATUS Status = AE_OK; |
| ACPI_OPERAND_OBJECT *TableDesc = DdbHandle; |
| UINT32 TableIndex; |
| ACPI_TABLE_HEADER *Table; |
| |
| |
| ACPI_FUNCTION_TRACE (ExUnloadTable); |
| |
| |
| /* |
| * Temporarily emit a warning so that the ASL for the machine can be |
| * hopefully obtained. This is to say that the Unload() operator is |
| * extremely rare if not completely unused. |
| */ |
| ACPI_WARNING ((AE_INFO, |
| "Received request to unload an ACPI table")); |
| |
| /* |
| * Validate the handle |
| * Although the handle is partially validated in AcpiExReconfiguration() |
| * when it calls AcpiExResolveOperands(), the handle is more completely |
| * validated here. |
| * |
| * Handle must be a valid operand object of type reference. Also, the |
| * DdbHandle must still be marked valid (table has not been previously |
| * unloaded) |
| */ |
| if ((!DdbHandle) || |
| (ACPI_GET_DESCRIPTOR_TYPE (DdbHandle) != ACPI_DESC_TYPE_OPERAND) || |
| (DdbHandle->Common.Type != ACPI_TYPE_LOCAL_REFERENCE) || |
| (!(DdbHandle->Common.Flags & AOPOBJ_DATA_VALID))) |
| { |
| return_ACPI_STATUS (AE_AML_OPERAND_TYPE); |
| } |
| |
| /* Get the table index from the DdbHandle */ |
| |
| TableIndex = TableDesc->Reference.Value; |
| |
| /* Ensure the table is still loaded */ |
| |
| if (!AcpiTbIsTableLoaded (TableIndex)) |
| { |
| return_ACPI_STATUS (AE_NOT_EXIST); |
| } |
| |
| /* Invoke table handler if present */ |
| |
| if (AcpiGbl_TableHandler) |
| { |
| Status = AcpiGetTableByIndex (TableIndex, &Table); |
| if (ACPI_SUCCESS (Status)) |
| { |
| (void) AcpiGbl_TableHandler (ACPI_TABLE_EVENT_UNLOAD, Table, |
| AcpiGbl_TableHandlerContext); |
| } |
| } |
| |
| /* Delete the portion of the namespace owned by this table */ |
| |
| Status = AcpiTbDeleteNamespaceByOwner (TableIndex); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| |
| (void) AcpiTbReleaseOwnerId (TableIndex); |
| AcpiTbSetTableLoadedFlag (TableIndex, FALSE); |
| |
| /* |
| * Invalidate the handle. We do this because the handle may be stored |
| * in a named object and may not be actually deleted until much later. |
| */ |
| DdbHandle->Common.Flags &= ~AOPOBJ_DATA_VALID; |
| return_ACPI_STATUS (AE_OK); |
| } |