| /****************************************************************************** |
| * |
| * Module Name: evregion - Operation Region support |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <contrib/dev/acpica/include/acpi.h> |
| #include <contrib/dev/acpica/include/accommon.h> |
| #include <contrib/dev/acpica/include/acevents.h> |
| #include <contrib/dev/acpica/include/acnamesp.h> |
| #include <contrib/dev/acpica/include/acinterp.h> |
| |
| #define _COMPONENT ACPI_EVENTS |
| ACPI_MODULE_NAME ("evregion") |
| |
| |
| extern UINT8 AcpiGbl_DefaultAddressSpaces[]; |
| |
| /* Local prototypes */ |
| |
| static void |
| AcpiEvOrphanEcRegMethod ( |
| ACPI_NAMESPACE_NODE *EcDeviceNode); |
| |
| static ACPI_STATUS |
| AcpiEvRegRun ( |
| ACPI_HANDLE ObjHandle, |
| UINT32 Level, |
| void *Context, |
| void **ReturnValue); |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiEvInitializeOpRegions |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Execute _REG methods for all Operation Regions that have |
| * an installed default region handler. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiEvInitializeOpRegions ( |
| void) |
| { |
| ACPI_STATUS Status; |
| UINT32 i; |
| |
| |
| ACPI_FUNCTION_TRACE (EvInitializeOpRegions); |
| |
| |
| Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Run the _REG methods for OpRegions in each default address space */ |
| |
| for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) |
| { |
| /* |
| * Make sure the installed handler is the DEFAULT handler. If not the |
| * default, the _REG methods will have already been run (when the |
| * handler was installed) |
| */ |
| if (AcpiEvHasDefaultHandler (AcpiGbl_RootNode, |
| AcpiGbl_DefaultAddressSpaces[i])) |
| { |
| Status = AcpiEvExecuteRegMethods (AcpiGbl_RootNode, |
| AcpiGbl_DefaultAddressSpaces[i]); |
| } |
| } |
| |
| AcpiGbl_RegMethodsExecuted = TRUE; |
| |
| (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiEvAddressSpaceDispatch |
| * |
| * PARAMETERS: RegionObj - Internal region object |
| * FieldObj - Corresponding field. Can be NULL. |
| * Function - Read or Write operation |
| * RegionOffset - Where in the region to read or write |
| * BitWidth - Field width in bits (8, 16, 32, or 64) |
| * Value - Pointer to in or out value, must be |
| * a full 64-bit integer |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Dispatch an address space or operation region access to |
| * a previously installed handler. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiEvAddressSpaceDispatch ( |
| ACPI_OPERAND_OBJECT *RegionObj, |
| ACPI_OPERAND_OBJECT *FieldObj, |
| UINT32 Function, |
| UINT32 RegionOffset, |
| UINT32 BitWidth, |
| UINT64 *Value) |
| { |
| ACPI_STATUS Status; |
| ACPI_ADR_SPACE_HANDLER Handler; |
| ACPI_ADR_SPACE_SETUP RegionSetup; |
| ACPI_OPERAND_OBJECT *HandlerDesc; |
| ACPI_OPERAND_OBJECT *RegionObj2; |
| void *RegionContext = NULL; |
| ACPI_CONNECTION_INFO *Context; |
| ACPI_PHYSICAL_ADDRESS Address; |
| |
| |
| ACPI_FUNCTION_TRACE (EvAddressSpaceDispatch); |
| |
| |
| RegionObj2 = AcpiNsGetSecondaryObject (RegionObj); |
| if (!RegionObj2) |
| { |
| return_ACPI_STATUS (AE_NOT_EXIST); |
| } |
| |
| /* Ensure that there is a handler associated with this region */ |
| |
| HandlerDesc = RegionObj->Region.Handler; |
| if (!HandlerDesc) |
| { |
| ACPI_ERROR ((AE_INFO, |
| "No handler for Region [%4.4s] (%p) [%s]", |
| AcpiUtGetNodeName (RegionObj->Region.Node), |
| RegionObj, AcpiUtGetRegionName (RegionObj->Region.SpaceId))); |
| |
| return_ACPI_STATUS (AE_NOT_EXIST); |
| } |
| |
| Context = HandlerDesc->AddressSpace.Context; |
| |
| /* |
| * It may be the case that the region has never been initialized. |
| * Some types of regions require special init code |
| */ |
| if (!(RegionObj->Region.Flags & AOPOBJ_SETUP_COMPLETE)) |
| { |
| /* This region has not been initialized yet, do it */ |
| |
| RegionSetup = HandlerDesc->AddressSpace.Setup; |
| if (!RegionSetup) |
| { |
| /* No initialization routine, exit with error */ |
| |
| ACPI_ERROR ((AE_INFO, |
| "No init routine for region(%p) [%s]", |
| RegionObj, AcpiUtGetRegionName (RegionObj->Region.SpaceId))); |
| return_ACPI_STATUS (AE_NOT_EXIST); |
| } |
| |
| /* |
| * We must exit the interpreter because the region setup will |
| * potentially execute control methods (for example, the _REG method |
| * for this region) |
| */ |
| AcpiExExitInterpreter (); |
| |
| Status = RegionSetup (RegionObj, ACPI_REGION_ACTIVATE, |
| Context, &RegionContext); |
| |
| /* Re-enter the interpreter */ |
| |
| AcpiExEnterInterpreter (); |
| |
| /* Check for failure of the Region Setup */ |
| |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_EXCEPTION ((AE_INFO, Status, |
| "During region initialization: [%s]", |
| AcpiUtGetRegionName (RegionObj->Region.SpaceId))); |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Region initialization may have been completed by RegionSetup */ |
| |
| if (!(RegionObj->Region.Flags & AOPOBJ_SETUP_COMPLETE)) |
| { |
| RegionObj->Region.Flags |= AOPOBJ_SETUP_COMPLETE; |
| |
| /* |
| * Save the returned context for use in all accesses to |
| * the handler for this particular region |
| */ |
| if (!(RegionObj2->Extra.RegionContext)) |
| { |
| RegionObj2->Extra.RegionContext = RegionContext; |
| } |
| } |
| } |
| |
| /* We have everything we need, we can invoke the address space handler */ |
| |
| Handler = HandlerDesc->AddressSpace.Handler; |
| Address = (RegionObj->Region.Address + RegionOffset); |
| |
| /* |
| * Special handling for GenericSerialBus and GeneralPurposeIo: |
| * There are three extra parameters that must be passed to the |
| * handler via the context: |
| * 1) Connection buffer, a resource template from Connection() op |
| * 2) Length of the above buffer |
| * 3) Actual access length from the AccessAs() op |
| * |
| * In addition, for GeneralPurposeIo, the Address and BitWidth fields |
| * are defined as follows: |
| * 1) Address is the pin number index of the field (bit offset from |
| * the previous Connection) |
| * 2) BitWidth is the actual bit length of the field (number of pins) |
| */ |
| if ((RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GSBUS) && |
| Context && |
| FieldObj) |
| { |
| /* Get the Connection (ResourceTemplate) buffer */ |
| |
| Context->Connection = FieldObj->Field.ResourceBuffer; |
| Context->Length = FieldObj->Field.ResourceLength; |
| Context->AccessLength = FieldObj->Field.AccessLength; |
| } |
| if ((RegionObj->Region.SpaceId == ACPI_ADR_SPACE_GPIO) && |
| Context && |
| FieldObj) |
| { |
| /* Get the Connection (ResourceTemplate) buffer */ |
| |
| Context->Connection = FieldObj->Field.ResourceBuffer; |
| Context->Length = FieldObj->Field.ResourceLength; |
| Context->AccessLength = FieldObj->Field.AccessLength; |
| Address = FieldObj->Field.PinNumberIndex; |
| BitWidth = FieldObj->Field.BitLength; |
| } |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, |
| "Handler %p (@%p) Address %8.8X%8.8X [%s]\n", |
| &RegionObj->Region.Handler->AddressSpace, Handler, |
| ACPI_FORMAT_UINT64 (Address), |
| AcpiUtGetRegionName (RegionObj->Region.SpaceId))); |
| |
| if (!(HandlerDesc->AddressSpace.HandlerFlags & |
| ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) |
| { |
| /* |
| * For handlers other than the default (supplied) handlers, we must |
| * exit the interpreter because the handler *might* block -- we don't |
| * know what it will do, so we can't hold the lock on the intepreter. |
| */ |
| AcpiExExitInterpreter(); |
| } |
| |
| /* Call the handler */ |
| |
| Status = Handler (Function, Address, BitWidth, Value, Context, |
| RegionObj2->Extra.RegionContext); |
| |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_EXCEPTION ((AE_INFO, Status, "Returned by Handler for [%s]", |
| AcpiUtGetRegionName (RegionObj->Region.SpaceId))); |
| } |
| |
| if (!(HandlerDesc->AddressSpace.HandlerFlags & |
| ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) |
| { |
| /* |
| * We just returned from a non-default handler, we must re-enter the |
| * interpreter |
| */ |
| AcpiExEnterInterpreter (); |
| } |
| |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiEvDetachRegion |
| * |
| * PARAMETERS: RegionObj - Region Object |
| * AcpiNsIsLocked - Namespace Region Already Locked? |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Break the association between the handler and the region |
| * this is a two way association. |
| * |
| ******************************************************************************/ |
| |
| void |
| AcpiEvDetachRegion( |
| ACPI_OPERAND_OBJECT *RegionObj, |
| BOOLEAN AcpiNsIsLocked) |
| { |
| ACPI_OPERAND_OBJECT *HandlerObj; |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| ACPI_OPERAND_OBJECT *StartDesc; |
| ACPI_OPERAND_OBJECT **LastObjPtr; |
| ACPI_ADR_SPACE_SETUP RegionSetup; |
| void **RegionContext; |
| ACPI_OPERAND_OBJECT *RegionObj2; |
| ACPI_STATUS Status; |
| |
| |
| ACPI_FUNCTION_TRACE (EvDetachRegion); |
| |
| |
| RegionObj2 = AcpiNsGetSecondaryObject (RegionObj); |
| if (!RegionObj2) |
| { |
| return_VOID; |
| } |
| RegionContext = &RegionObj2->Extra.RegionContext; |
| |
| /* Get the address handler from the region object */ |
| |
| HandlerObj = RegionObj->Region.Handler; |
| if (!HandlerObj) |
| { |
| /* This region has no handler, all done */ |
| |
| return_VOID; |
| } |
| |
| /* Find this region in the handler's list */ |
| |
| ObjDesc = HandlerObj->AddressSpace.RegionList; |
| StartDesc = ObjDesc; |
| LastObjPtr = &HandlerObj->AddressSpace.RegionList; |
| |
| while (ObjDesc) |
| { |
| /* Is this the correct Region? */ |
| |
| if (ObjDesc == RegionObj) |
| { |
| ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, |
| "Removing Region %p from address handler %p\n", |
| RegionObj, HandlerObj)); |
| |
| /* This is it, remove it from the handler's list */ |
| |
| *LastObjPtr = ObjDesc->Region.Next; |
| ObjDesc->Region.Next = NULL; /* Must clear field */ |
| |
| if (AcpiNsIsLocked) |
| { |
| Status = AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_VOID; |
| } |
| } |
| |
| /* Now stop region accesses by executing the _REG method */ |
| |
| Status = AcpiEvExecuteRegMethod (RegionObj, ACPI_REG_DISCONNECT); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_EXCEPTION ((AE_INFO, Status, "from region _REG, [%s]", |
| AcpiUtGetRegionName (RegionObj->Region.SpaceId))); |
| } |
| |
| if (AcpiNsIsLocked) |
| { |
| Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_VOID; |
| } |
| } |
| |
| /* |
| * If the region has been activated, call the setup handler with |
| * the deactivate notification |
| */ |
| if (RegionObj->Region.Flags & AOPOBJ_SETUP_COMPLETE) |
| { |
| RegionSetup = HandlerObj->AddressSpace.Setup; |
| Status = RegionSetup (RegionObj, ACPI_REGION_DEACTIVATE, |
| HandlerObj->AddressSpace.Context, RegionContext); |
| |
| /* |
| * RegionContext should have been released by the deactivate |
| * operation. We don't need access to it anymore here. |
| */ |
| if (RegionContext) |
| { |
| *RegionContext = NULL; |
| } |
| |
| /* Init routine may fail, Just ignore errors */ |
| |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_EXCEPTION ((AE_INFO, Status, |
| "from region handler - deactivate, [%s]", |
| AcpiUtGetRegionName (RegionObj->Region.SpaceId))); |
| } |
| |
| RegionObj->Region.Flags &= ~(AOPOBJ_SETUP_COMPLETE); |
| } |
| |
| /* |
| * Remove handler reference in the region |
| * |
| * NOTE: this doesn't mean that the region goes away, the region |
| * is just inaccessible as indicated to the _REG method |
| * |
| * If the region is on the handler's list, this must be the |
| * region's handler |
| */ |
| RegionObj->Region.Handler = NULL; |
| AcpiUtRemoveReference (HandlerObj); |
| |
| return_VOID; |
| } |
| |
| /* Walk the linked list of handlers */ |
| |
| LastObjPtr = &ObjDesc->Region.Next; |
| ObjDesc = ObjDesc->Region.Next; |
| |
| /* Prevent infinite loop if list is corrupted */ |
| |
| if (ObjDesc == StartDesc) |
| { |
| ACPI_ERROR ((AE_INFO, |
| "Circular handler list in region object %p", |
| RegionObj)); |
| return_VOID; |
| } |
| } |
| |
| /* If we get here, the region was not in the handler's region list */ |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, |
| "Cannot remove region %p from address handler %p\n", |
| RegionObj, HandlerObj)); |
| |
| return_VOID; |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiEvAttachRegion |
| * |
| * PARAMETERS: HandlerObj - Handler Object |
| * RegionObj - Region Object |
| * AcpiNsIsLocked - Namespace Region Already Locked? |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Create the association between the handler and the region |
| * this is a two way association. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiEvAttachRegion ( |
| ACPI_OPERAND_OBJECT *HandlerObj, |
| ACPI_OPERAND_OBJECT *RegionObj, |
| BOOLEAN AcpiNsIsLocked) |
| { |
| |
| ACPI_FUNCTION_TRACE (EvAttachRegion); |
| |
| |
| ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, |
| "Adding Region [%4.4s] %p to address handler %p [%s]\n", |
| AcpiUtGetNodeName (RegionObj->Region.Node), |
| RegionObj, HandlerObj, |
| AcpiUtGetRegionName (RegionObj->Region.SpaceId))); |
| |
| /* Link this region to the front of the handler's list */ |
| |
| RegionObj->Region.Next = HandlerObj->AddressSpace.RegionList; |
| HandlerObj->AddressSpace.RegionList = RegionObj; |
| |
| /* Install the region's handler */ |
| |
| if (RegionObj->Region.Handler) |
| { |
| return_ACPI_STATUS (AE_ALREADY_EXISTS); |
| } |
| |
| RegionObj->Region.Handler = HandlerObj; |
| AcpiUtAddReference (HandlerObj); |
| |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiEvExecuteRegMethod |
| * |
| * PARAMETERS: RegionObj - Region object |
| * Function - Passed to _REG: On (1) or Off (0) |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Execute _REG method for a region |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiEvExecuteRegMethod ( |
| ACPI_OPERAND_OBJECT *RegionObj, |
| UINT32 Function) |
| { |
| ACPI_EVALUATE_INFO *Info; |
| ACPI_OPERAND_OBJECT *Args[3]; |
| ACPI_OPERAND_OBJECT *RegionObj2; |
| ACPI_STATUS Status; |
| |
| |
| ACPI_FUNCTION_TRACE (EvExecuteRegMethod); |
| |
| |
| RegionObj2 = AcpiNsGetSecondaryObject (RegionObj); |
| if (!RegionObj2) |
| { |
| return_ACPI_STATUS (AE_NOT_EXIST); |
| } |
| |
| if (RegionObj2->Extra.Method_REG == NULL) |
| { |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| /* Allocate and initialize the evaluation information block */ |
| |
| Info = ACPI_ALLOCATE_ZEROED (sizeof (ACPI_EVALUATE_INFO)); |
| if (!Info) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| Info->PrefixNode = RegionObj2->Extra.Method_REG; |
| Info->RelativePathname = NULL; |
| Info->Parameters = Args; |
| Info->Flags = ACPI_IGNORE_RETURN_VALUE; |
| |
| /* |
| * The _REG method has two arguments: |
| * |
| * Arg0 - Integer: |
| * Operation region space ID Same value as RegionObj->Region.SpaceId |
| * |
| * Arg1 - Integer: |
| * connection status 1 for connecting the handler, 0 for disconnecting |
| * the handler (Passed as a parameter) |
| */ |
| Args[0] = AcpiUtCreateIntegerObject ((UINT64) RegionObj->Region.SpaceId); |
| if (!Args[0]) |
| { |
| Status = AE_NO_MEMORY; |
| goto Cleanup1; |
| } |
| |
| Args[1] = AcpiUtCreateIntegerObject ((UINT64) Function); |
| if (!Args[1]) |
| { |
| Status = AE_NO_MEMORY; |
| goto Cleanup2; |
| } |
| |
| Args[2] = NULL; /* Terminate list */ |
| |
| /* Execute the method, no return value */ |
| |
| ACPI_DEBUG_EXEC ( |
| AcpiUtDisplayInitPathname (ACPI_TYPE_METHOD, Info->PrefixNode, NULL)); |
| |
| Status = AcpiNsEvaluate (Info); |
| AcpiUtRemoveReference (Args[1]); |
| |
| Cleanup2: |
| AcpiUtRemoveReference (Args[0]); |
| |
| Cleanup1: |
| ACPI_FREE (Info); |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiEvExecuteRegMethods |
| * |
| * PARAMETERS: Node - Namespace node for the device |
| * SpaceId - The address space ID |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Run all _REG methods for the input Space ID; |
| * Note: assumes namespace is locked, or system init time. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiEvExecuteRegMethods ( |
| ACPI_NAMESPACE_NODE *Node, |
| ACPI_ADR_SPACE_TYPE SpaceId) |
| { |
| ACPI_STATUS Status; |
| ACPI_REG_WALK_INFO Info; |
| |
| |
| ACPI_FUNCTION_TRACE (EvExecuteRegMethods); |
| |
| Info.SpaceId = SpaceId; |
| Info.RegRunCount = 0; |
| |
| ACPI_DEBUG_PRINT_RAW ((ACPI_DB_NAMES, |
| " Running _REG methods for SpaceId %s\n", |
| AcpiUtGetRegionName (Info.SpaceId))); |
| |
| /* |
| * Run all _REG methods for all Operation Regions for this space ID. This |
| * is a separate walk in order to handle any interdependencies between |
| * regions and _REG methods. (i.e. handlers must be installed for all |
| * regions of this Space ID before we can run any _REG methods) |
| */ |
| Status = AcpiNsWalkNamespace (ACPI_TYPE_ANY, Node, ACPI_UINT32_MAX, |
| ACPI_NS_WALK_UNLOCK, AcpiEvRegRun, NULL, &Info, NULL); |
| |
| /* Special case for EC: handle "orphan" _REG methods with no region */ |
| |
| if (SpaceId == ACPI_ADR_SPACE_EC) |
| { |
| AcpiEvOrphanEcRegMethod (Node); |
| } |
| |
| ACPI_DEBUG_PRINT_RAW ((ACPI_DB_NAMES, |
| " Executed %u _REG methods for SpaceId %s\n", |
| Info.RegRunCount, AcpiUtGetRegionName (Info.SpaceId))); |
| |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiEvRegRun |
| * |
| * PARAMETERS: WalkNamespace callback |
| * |
| * DESCRIPTION: Run _REG method for region objects of the requested spaceID |
| * |
| ******************************************************************************/ |
| |
| static ACPI_STATUS |
| AcpiEvRegRun ( |
| ACPI_HANDLE ObjHandle, |
| UINT32 Level, |
| void *Context, |
| void **ReturnValue) |
| { |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| ACPI_NAMESPACE_NODE *Node; |
| ACPI_STATUS Status; |
| ACPI_REG_WALK_INFO *Info; |
| |
| |
| Info = ACPI_CAST_PTR (ACPI_REG_WALK_INFO, Context); |
| |
| /* Convert and validate the device handle */ |
| |
| Node = AcpiNsValidateHandle (ObjHandle); |
| if (!Node) |
| { |
| return (AE_BAD_PARAMETER); |
| } |
| |
| /* |
| * We only care about regions.and objects that are allowed to have address |
| * space handlers |
| */ |
| if ((Node->Type != ACPI_TYPE_REGION) && |
| (Node != AcpiGbl_RootNode)) |
| { |
| return (AE_OK); |
| } |
| |
| /* Check for an existing internal object */ |
| |
| ObjDesc = AcpiNsGetAttachedObject (Node); |
| if (!ObjDesc) |
| { |
| /* No object, just exit */ |
| |
| return (AE_OK); |
| } |
| |
| /* Object is a Region */ |
| |
| if (ObjDesc->Region.SpaceId != Info->SpaceId) |
| { |
| /* This region is for a different address space, just ignore it */ |
| |
| return (AE_OK); |
| } |
| |
| Info->RegRunCount++; |
| Status = AcpiEvExecuteRegMethod (ObjDesc, ACPI_REG_CONNECT); |
| return (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiEvOrphanEcRegMethod |
| * |
| * PARAMETERS: EcDeviceNode - Namespace node for an EC device |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Execute an "orphan" _REG method that appears under the EC |
| * device. This is a _REG method that has no corresponding region |
| * within the EC device scope. The orphan _REG method appears to |
| * have been enabled by the description of the ECDT in the ACPI |
| * specification: "The availability of the region space can be |
| * detected by providing a _REG method object underneath the |
| * Embedded Controller device." |
| * |
| * To quickly access the EC device, we use the EcDeviceNode used |
| * during EC handler installation. Otherwise, we would need to |
| * perform a time consuming namespace walk, executing _HID |
| * methods to find the EC device. |
| * |
| * MUTEX: Assumes the namespace is locked |
| * |
| ******************************************************************************/ |
| |
| static void |
| AcpiEvOrphanEcRegMethod ( |
| ACPI_NAMESPACE_NODE *EcDeviceNode) |
| { |
| ACPI_HANDLE RegMethod; |
| ACPI_NAMESPACE_NODE *NextNode; |
| ACPI_STATUS Status; |
| ACPI_OBJECT_LIST Args; |
| ACPI_OBJECT Objects[2]; |
| |
| |
| ACPI_FUNCTION_TRACE (EvOrphanEcRegMethod); |
| |
| |
| if (!EcDeviceNode) |
| { |
| return_VOID; |
| } |
| |
| /* Namespace is currently locked, must release */ |
| |
| (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); |
| |
| /* Get a handle to a _REG method immediately under the EC device */ |
| |
| Status = AcpiGetHandle (EcDeviceNode, METHOD_NAME__REG, &RegMethod); |
| if (ACPI_FAILURE (Status)) |
| { |
| goto Exit; /* There is no _REG method present */ |
| } |
| |
| /* |
| * Execute the _REG method only if there is no Operation Region in |
| * this scope with the Embedded Controller space ID. Otherwise, it |
| * will already have been executed. Note, this allows for Regions |
| * with other space IDs to be present; but the code below will then |
| * execute the _REG method with the EmbeddedControl SpaceID argument. |
| */ |
| NextNode = AcpiNsGetNextNode (EcDeviceNode, NULL); |
| while (NextNode) |
| { |
| if ((NextNode->Type == ACPI_TYPE_REGION) && |
| (NextNode->Object) && |
| (NextNode->Object->Region.SpaceId == ACPI_ADR_SPACE_EC)) |
| { |
| goto Exit; /* Do not execute the _REG */ |
| } |
| |
| NextNode = AcpiNsGetNextNode (EcDeviceNode, NextNode); |
| } |
| |
| /* Evaluate the _REG(EmbeddedControl,Connect) method */ |
| |
| Args.Count = 2; |
| Args.Pointer = Objects; |
| Objects[0].Type = ACPI_TYPE_INTEGER; |
| Objects[0].Integer.Value = ACPI_ADR_SPACE_EC; |
| Objects[1].Type = ACPI_TYPE_INTEGER; |
| Objects[1].Integer.Value = ACPI_REG_CONNECT; |
| |
| Status = AcpiEvaluateObject (RegMethod, NULL, &Args, NULL); |
| |
| Exit: |
| /* We ignore all errors from above, don't care */ |
| |
| Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); |
| return_VOID; |
| } |