| /****************************************************************************** |
| * |
| * Module Name: dsobject - Dispatcher object management routines |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <contrib/dev/acpica/include/acpi.h> |
| #include <contrib/dev/acpica/include/accommon.h> |
| #include <contrib/dev/acpica/include/acparser.h> |
| #include <contrib/dev/acpica/include/amlcode.h> |
| #include <contrib/dev/acpica/include/acdispat.h> |
| #include <contrib/dev/acpica/include/acnamesp.h> |
| #include <contrib/dev/acpica/include/acinterp.h> |
| |
| #define _COMPONENT ACPI_DISPATCHER |
| ACPI_MODULE_NAME ("dsobject") |
| |
| /* Local prototypes */ |
| |
| static ACPI_STATUS |
| AcpiDsBuildInternalObject ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Op, |
| ACPI_OPERAND_OBJECT **ObjDescPtr); |
| |
| |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsBuildInternalObject |
| * |
| * PARAMETERS: WalkState - Current walk state |
| * Op - Parser object to be translated |
| * ObjDescPtr - Where the ACPI internal object is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Translate a parser Op object to the equivalent namespace object |
| * Simple objects are any objects other than a package object! |
| * |
| ******************************************************************************/ |
| |
| static ACPI_STATUS |
| AcpiDsBuildInternalObject ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Op, |
| ACPI_OPERAND_OBJECT **ObjDescPtr) |
| { |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| ACPI_STATUS Status; |
| ACPI_OBJECT_TYPE Type; |
| |
| |
| ACPI_FUNCTION_TRACE (DsBuildInternalObject); |
| |
| |
| *ObjDescPtr = NULL; |
| if (Op->Common.AmlOpcode == AML_INT_NAMEPATH_OP) |
| { |
| /* |
| * This is a named object reference. If this name was |
| * previously looked up in the namespace, it was stored in this op. |
| * Otherwise, go ahead and look it up now |
| */ |
| if (!Op->Common.Node) |
| { |
| Status = AcpiNsLookup (WalkState->ScopeInfo, |
| Op->Common.Value.String, |
| ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, |
| ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE, NULL, |
| ACPI_CAST_INDIRECT_PTR (ACPI_NAMESPACE_NODE, &(Op->Common.Node))); |
| if (ACPI_FAILURE (Status)) |
| { |
| /* Check if we are resolving a named reference within a package */ |
| |
| if ((Status == AE_NOT_FOUND) && (AcpiGbl_EnableInterpreterSlack) && |
| |
| ((Op->Common.Parent->Common.AmlOpcode == AML_PACKAGE_OP) || |
| (Op->Common.Parent->Common.AmlOpcode == AML_VAR_PACKAGE_OP))) |
| { |
| /* |
| * We didn't find the target and we are populating elements |
| * of a package - ignore if slack enabled. Some ASL code |
| * contains dangling invalid references in packages and |
| * expects that no exception will be issued. Leave the |
| * element as a null element. It cannot be used, but it |
| * can be overwritten by subsequent ASL code - this is |
| * typically the case. |
| */ |
| ACPI_DEBUG_PRINT ((ACPI_DB_INFO, |
| "Ignoring unresolved reference in package [%4.4s]\n", |
| WalkState->ScopeInfo->Scope.Node->Name.Ascii)); |
| |
| return_ACPI_STATUS (AE_OK); |
| } |
| else |
| { |
| ACPI_ERROR_NAMESPACE (Op->Common.Value.String, Status); |
| } |
| |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| /* Special object resolution for elements of a package */ |
| |
| if ((Op->Common.Parent->Common.AmlOpcode == AML_PACKAGE_OP) || |
| (Op->Common.Parent->Common.AmlOpcode == AML_VAR_PACKAGE_OP)) |
| { |
| /* |
| * Attempt to resolve the node to a value before we insert it into |
| * the package. If this is a reference to a common data type, |
| * resolve it immediately. According to the ACPI spec, package |
| * elements can only be "data objects" or method references. |
| * Attempt to resolve to an Integer, Buffer, String or Package. |
| * If cannot, return the named reference (for things like Devices, |
| * Methods, etc.) Buffer Fields and Fields will resolve to simple |
| * objects (int/buf/str/pkg). |
| * |
| * NOTE: References to things like Devices, Methods, Mutexes, etc. |
| * will remain as named references. This behavior is not described |
| * in the ACPI spec, but it appears to be an oversight. |
| */ |
| ObjDesc = ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, Op->Common.Node); |
| |
| Status = AcpiExResolveNodeToValue ( |
| ACPI_CAST_INDIRECT_PTR (ACPI_NAMESPACE_NODE, &ObjDesc), |
| WalkState); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* |
| * Special handling for Alias objects. We need to setup the type |
| * and the Op->Common.Node to point to the Alias target. Note, |
| * Alias has at most one level of indirection internally. |
| */ |
| Type = Op->Common.Node->Type; |
| if (Type == ACPI_TYPE_LOCAL_ALIAS) |
| { |
| Type = ObjDesc->Common.Type; |
| Op->Common.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, |
| Op->Common.Node->Object); |
| } |
| |
| switch (Type) |
| { |
| /* |
| * For these types, we need the actual node, not the subobject. |
| * However, the subobject did not get an extra reference count above. |
| * |
| * TBD: should ExResolveNodeToValue be changed to fix this? |
| */ |
| case ACPI_TYPE_DEVICE: |
| case ACPI_TYPE_THERMAL: |
| |
| AcpiUtAddReference (Op->Common.Node->Object); |
| |
| /*lint -fallthrough */ |
| /* |
| * For these types, we need the actual node, not the subobject. |
| * The subobject got an extra reference count in ExResolveNodeToValue. |
| */ |
| case ACPI_TYPE_MUTEX: |
| case ACPI_TYPE_METHOD: |
| case ACPI_TYPE_POWER: |
| case ACPI_TYPE_PROCESSOR: |
| case ACPI_TYPE_EVENT: |
| case ACPI_TYPE_REGION: |
| |
| /* We will create a reference object for these types below */ |
| break; |
| |
| default: |
| /* |
| * All other types - the node was resolved to an actual |
| * object, we are done. |
| */ |
| goto Exit; |
| } |
| } |
| } |
| |
| /* Create and init a new internal ACPI object */ |
| |
| ObjDesc = AcpiUtCreateInternalObject ( |
| (AcpiPsGetOpcodeInfo (Op->Common.AmlOpcode))->ObjectType); |
| if (!ObjDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| Status = AcpiDsInitObjectFromOp (WalkState, Op, Op->Common.AmlOpcode, |
| &ObjDesc); |
| if (ACPI_FAILURE (Status)) |
| { |
| AcpiUtRemoveReference (ObjDesc); |
| return_ACPI_STATUS (Status); |
| } |
| |
| Exit: |
| *ObjDescPtr = ObjDesc; |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsBuildInternalBufferObj |
| * |
| * PARAMETERS: WalkState - Current walk state |
| * Op - Parser object to be translated |
| * BufferLength - Length of the buffer |
| * ObjDescPtr - Where the ACPI internal object is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Translate a parser Op package object to the equivalent |
| * namespace object |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDsBuildInternalBufferObj ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Op, |
| UINT32 BufferLength, |
| ACPI_OPERAND_OBJECT **ObjDescPtr) |
| { |
| ACPI_PARSE_OBJECT *Arg; |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| ACPI_PARSE_OBJECT *ByteList; |
| UINT32 ByteListLength = 0; |
| |
| |
| ACPI_FUNCTION_TRACE (DsBuildInternalBufferObj); |
| |
| |
| /* |
| * If we are evaluating a Named buffer object "Name (xxxx, Buffer)". |
| * The buffer object already exists (from the NS node), otherwise it must |
| * be created. |
| */ |
| ObjDesc = *ObjDescPtr; |
| if (!ObjDesc) |
| { |
| /* Create a new buffer object */ |
| |
| ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_BUFFER); |
| *ObjDescPtr = ObjDesc; |
| if (!ObjDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| } |
| |
| /* |
| * Second arg is the buffer data (optional) ByteList can be either |
| * individual bytes or a string initializer. In either case, a |
| * ByteList appears in the AML. |
| */ |
| Arg = Op->Common.Value.Arg; /* skip first arg */ |
| |
| ByteList = Arg->Named.Next; |
| if (ByteList) |
| { |
| if (ByteList->Common.AmlOpcode != AML_INT_BYTELIST_OP) |
| { |
| ACPI_ERROR ((AE_INFO, |
| "Expecting bytelist, found AML opcode 0x%X in op %p", |
| ByteList->Common.AmlOpcode, ByteList)); |
| |
| AcpiUtRemoveReference (ObjDesc); |
| return (AE_TYPE); |
| } |
| |
| ByteListLength = (UINT32) ByteList->Common.Value.Integer; |
| } |
| |
| /* |
| * The buffer length (number of bytes) will be the larger of: |
| * 1) The specified buffer length and |
| * 2) The length of the initializer byte list |
| */ |
| ObjDesc->Buffer.Length = BufferLength; |
| if (ByteListLength > BufferLength) |
| { |
| ObjDesc->Buffer.Length = ByteListLength; |
| } |
| |
| /* Allocate the buffer */ |
| |
| if (ObjDesc->Buffer.Length == 0) |
| { |
| ObjDesc->Buffer.Pointer = NULL; |
| ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, |
| "Buffer defined with zero length in AML, creating\n")); |
| } |
| else |
| { |
| ObjDesc->Buffer.Pointer = ACPI_ALLOCATE_ZEROED ( |
| ObjDesc->Buffer.Length); |
| if (!ObjDesc->Buffer.Pointer) |
| { |
| AcpiUtDeleteObjectDesc (ObjDesc); |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| /* Initialize buffer from the ByteList (if present) */ |
| |
| if (ByteList) |
| { |
| memcpy (ObjDesc->Buffer.Pointer, ByteList->Named.Data, |
| ByteListLength); |
| } |
| } |
| |
| ObjDesc->Buffer.Flags |= AOPOBJ_DATA_VALID; |
| Op->Common.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjDesc); |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsBuildInternalPackageObj |
| * |
| * PARAMETERS: WalkState - Current walk state |
| * Op - Parser object to be translated |
| * ElementCount - Number of elements in the package - this is |
| * the NumElements argument to Package() |
| * ObjDescPtr - Where the ACPI internal object is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Translate a parser Op package object to the equivalent |
| * namespace object |
| * |
| * NOTE: The number of elements in the package will be always be the NumElements |
| * count, regardless of the number of elements in the package list. If |
| * NumElements is smaller, only that many package list elements are used. |
| * if NumElements is larger, the Package object is padded out with |
| * objects of type Uninitialized (as per ACPI spec.) |
| * |
| * Even though the ASL compilers do not allow NumElements to be smaller |
| * than the Package list length (for the fixed length package opcode), some |
| * BIOS code modifies the AML on the fly to adjust the NumElements, and |
| * this code compensates for that. This also provides compatibility with |
| * other AML interpreters. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDsBuildInternalPackageObj ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Op, |
| UINT32 ElementCount, |
| ACPI_OPERAND_OBJECT **ObjDescPtr) |
| { |
| ACPI_PARSE_OBJECT *Arg; |
| ACPI_PARSE_OBJECT *Parent; |
| ACPI_OPERAND_OBJECT *ObjDesc = NULL; |
| ACPI_STATUS Status = AE_OK; |
| UINT32 i; |
| UINT16 Index; |
| UINT16 ReferenceCount; |
| |
| |
| ACPI_FUNCTION_TRACE (DsBuildInternalPackageObj); |
| |
| |
| /* Find the parent of a possibly nested package */ |
| |
| Parent = Op->Common.Parent; |
| while ((Parent->Common.AmlOpcode == AML_PACKAGE_OP) || |
| (Parent->Common.AmlOpcode == AML_VAR_PACKAGE_OP)) |
| { |
| Parent = Parent->Common.Parent; |
| } |
| |
| /* |
| * If we are evaluating a Named package object "Name (xxxx, Package)", |
| * the package object already exists, otherwise it must be created. |
| */ |
| ObjDesc = *ObjDescPtr; |
| if (!ObjDesc) |
| { |
| ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_PACKAGE); |
| *ObjDescPtr = ObjDesc; |
| if (!ObjDesc) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| ObjDesc->Package.Node = Parent->Common.Node; |
| } |
| |
| /* |
| * Allocate the element array (array of pointers to the individual |
| * objects) based on the NumElements parameter. Add an extra pointer slot |
| * so that the list is always null terminated. |
| */ |
| ObjDesc->Package.Elements = ACPI_ALLOCATE_ZEROED ( |
| ((ACPI_SIZE) ElementCount + 1) * sizeof (void *)); |
| |
| if (!ObjDesc->Package.Elements) |
| { |
| AcpiUtDeleteObjectDesc (ObjDesc); |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| |
| ObjDesc->Package.Count = ElementCount; |
| |
| /* |
| * Initialize the elements of the package, up to the NumElements count. |
| * Package is automatically padded with uninitialized (NULL) elements |
| * if NumElements is greater than the package list length. Likewise, |
| * Package is truncated if NumElements is less than the list length. |
| */ |
| Arg = Op->Common.Value.Arg; |
| Arg = Arg->Common.Next; |
| for (i = 0; Arg && (i < ElementCount); i++) |
| { |
| if (Arg->Common.AmlOpcode == AML_INT_RETURN_VALUE_OP) |
| { |
| if (Arg->Common.Node->Type == ACPI_TYPE_METHOD) |
| { |
| /* |
| * A method reference "looks" to the parser to be a method |
| * invocation, so we special case it here |
| */ |
| Arg->Common.AmlOpcode = AML_INT_NAMEPATH_OP; |
| Status = AcpiDsBuildInternalObject (WalkState, Arg, |
| &ObjDesc->Package.Elements[i]); |
| } |
| else |
| { |
| /* This package element is already built, just get it */ |
| |
| ObjDesc->Package.Elements[i] = |
| ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, Arg->Common.Node); |
| } |
| } |
| else |
| { |
| Status = AcpiDsBuildInternalObject (WalkState, Arg, |
| &ObjDesc->Package.Elements[i]); |
| } |
| |
| if (*ObjDescPtr) |
| { |
| /* Existing package, get existing reference count */ |
| |
| ReferenceCount = (*ObjDescPtr)->Common.ReferenceCount; |
| if (ReferenceCount > 1) |
| { |
| /* Make new element ref count match original ref count */ |
| |
| for (Index = 0; Index < (ReferenceCount - 1); Index++) |
| { |
| AcpiUtAddReference ((ObjDesc->Package.Elements[i])); |
| } |
| } |
| } |
| |
| Arg = Arg->Common.Next; |
| } |
| |
| /* Check for match between NumElements and actual length of PackageList */ |
| |
| if (Arg) |
| { |
| /* |
| * NumElements was exhausted, but there are remaining elements in the |
| * PackageList. Truncate the package to NumElements. |
| * |
| * Note: technically, this is an error, from ACPI spec: "It is an error |
| * for NumElements to be less than the number of elements in the |
| * PackageList". However, we just print a message and |
| * no exception is returned. This provides Windows compatibility. Some |
| * BIOSs will alter the NumElements on the fly, creating this type |
| * of ill-formed package object. |
| */ |
| while (Arg) |
| { |
| /* |
| * We must delete any package elements that were created earlier |
| * and are not going to be used because of the package truncation. |
| */ |
| if (Arg->Common.Node) |
| { |
| AcpiUtRemoveReference ( |
| ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, Arg->Common.Node)); |
| Arg->Common.Node = NULL; |
| } |
| |
| /* Find out how many elements there really are */ |
| |
| i++; |
| Arg = Arg->Common.Next; |
| } |
| |
| ACPI_INFO ((AE_INFO, |
| "Actual Package length (%u) is larger than NumElements field (%u), truncated", |
| i, ElementCount)); |
| } |
| else if (i < ElementCount) |
| { |
| /* |
| * Arg list (elements) was exhausted, but we did not reach NumElements count. |
| * Note: this is not an error, the package is padded out with NULLs. |
| */ |
| ACPI_DEBUG_PRINT ((ACPI_DB_INFO, |
| "Package List length (%u) smaller than NumElements count (%u), padded with null elements\n", |
| i, ElementCount)); |
| } |
| |
| ObjDesc->Package.Flags |= AOPOBJ_DATA_VALID; |
| Op->Common.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, ObjDesc); |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsCreateNode |
| * |
| * PARAMETERS: WalkState - Current walk state |
| * Node - NS Node to be initialized |
| * Op - Parser object to be translated |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Create the object to be associated with a namespace node |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDsCreateNode ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_NAMESPACE_NODE *Node, |
| ACPI_PARSE_OBJECT *Op) |
| { |
| ACPI_STATUS Status; |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| |
| |
| ACPI_FUNCTION_TRACE_PTR (DsCreateNode, Op); |
| |
| |
| /* |
| * Because of the execution pass through the non-control-method |
| * parts of the table, we can arrive here twice. Only init |
| * the named object node the first time through |
| */ |
| if (AcpiNsGetAttachedObject (Node)) |
| { |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| if (!Op->Common.Value.Arg) |
| { |
| /* No arguments, there is nothing to do */ |
| |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| /* Build an internal object for the argument(s) */ |
| |
| Status = AcpiDsBuildInternalObject (WalkState, Op->Common.Value.Arg, |
| &ObjDesc); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Re-type the object according to its argument */ |
| |
| Node->Type = ObjDesc->Common.Type; |
| |
| /* Attach obj to node */ |
| |
| Status = AcpiNsAttachObject (Node, ObjDesc, Node->Type); |
| |
| /* Remove local reference to the object */ |
| |
| AcpiUtRemoveReference (ObjDesc); |
| return_ACPI_STATUS (Status); |
| } |
| |
| #endif /* ACPI_NO_METHOD_EXECUTION */ |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsInitObjectFromOp |
| * |
| * PARAMETERS: WalkState - Current walk state |
| * Op - Parser op used to init the internal object |
| * Opcode - AML opcode associated with the object |
| * RetObjDesc - Namespace object to be initialized |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Initialize a namespace object from a parser Op and its |
| * associated arguments. The namespace object is a more compact |
| * representation of the Op and its arguments. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDsInitObjectFromOp ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Op, |
| UINT16 Opcode, |
| ACPI_OPERAND_OBJECT **RetObjDesc) |
| { |
| const ACPI_OPCODE_INFO *OpInfo; |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| ACPI_STATUS Status = AE_OK; |
| |
| |
| ACPI_FUNCTION_TRACE (DsInitObjectFromOp); |
| |
| |
| ObjDesc = *RetObjDesc; |
| OpInfo = AcpiPsGetOpcodeInfo (Opcode); |
| if (OpInfo->Class == AML_CLASS_UNKNOWN) |
| { |
| /* Unknown opcode */ |
| |
| return_ACPI_STATUS (AE_TYPE); |
| } |
| |
| /* Perform per-object initialization */ |
| |
| switch (ObjDesc->Common.Type) |
| { |
| case ACPI_TYPE_BUFFER: |
| /* |
| * Defer evaluation of Buffer TermArg operand |
| */ |
| ObjDesc->Buffer.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, |
| WalkState->Operands[0]); |
| ObjDesc->Buffer.AmlStart = Op->Named.Data; |
| ObjDesc->Buffer.AmlLength = Op->Named.Length; |
| break; |
| |
| case ACPI_TYPE_PACKAGE: |
| /* |
| * Defer evaluation of Package TermArg operand |
| */ |
| ObjDesc->Package.Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, |
| WalkState->Operands[0]); |
| ObjDesc->Package.AmlStart = Op->Named.Data; |
| ObjDesc->Package.AmlLength = Op->Named.Length; |
| break; |
| |
| case ACPI_TYPE_INTEGER: |
| |
| switch (OpInfo->Type) |
| { |
| case AML_TYPE_CONSTANT: |
| /* |
| * Resolve AML Constants here - AND ONLY HERE! |
| * All constants are integers. |
| * We mark the integer with a flag that indicates that it started |
| * life as a constant -- so that stores to constants will perform |
| * as expected (noop). ZeroOp is used as a placeholder for optional |
| * target operands. |
| */ |
| ObjDesc->Common.Flags = AOPOBJ_AML_CONSTANT; |
| |
| switch (Opcode) |
| { |
| case AML_ZERO_OP: |
| |
| ObjDesc->Integer.Value = 0; |
| break; |
| |
| case AML_ONE_OP: |
| |
| ObjDesc->Integer.Value = 1; |
| break; |
| |
| case AML_ONES_OP: |
| |
| ObjDesc->Integer.Value = ACPI_UINT64_MAX; |
| |
| /* Truncate value if we are executing from a 32-bit ACPI table */ |
| |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| (void) AcpiExTruncateFor32bitTable (ObjDesc); |
| #endif |
| break; |
| |
| case AML_REVISION_OP: |
| |
| ObjDesc->Integer.Value = ACPI_CA_VERSION; |
| break; |
| |
| default: |
| |
| ACPI_ERROR ((AE_INFO, |
| "Unknown constant opcode 0x%X", Opcode)); |
| Status = AE_AML_OPERAND_TYPE; |
| break; |
| } |
| break; |
| |
| case AML_TYPE_LITERAL: |
| |
| ObjDesc->Integer.Value = Op->Common.Value.Integer; |
| |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| if (AcpiExTruncateFor32bitTable (ObjDesc)) |
| { |
| /* Warn if we found a 64-bit constant in a 32-bit table */ |
| |
| ACPI_WARNING ((AE_INFO, |
| "Truncated 64-bit constant found in 32-bit table: %8.8X%8.8X => %8.8X", |
| ACPI_FORMAT_UINT64 (Op->Common.Value.Integer), |
| (UINT32) ObjDesc->Integer.Value)); |
| } |
| #endif |
| break; |
| |
| default: |
| |
| ACPI_ERROR ((AE_INFO, "Unknown Integer type 0x%X", |
| OpInfo->Type)); |
| Status = AE_AML_OPERAND_TYPE; |
| break; |
| } |
| break; |
| |
| case ACPI_TYPE_STRING: |
| |
| ObjDesc->String.Pointer = Op->Common.Value.String; |
| ObjDesc->String.Length = (UINT32) strlen (Op->Common.Value.String); |
| |
| /* |
| * The string is contained in the ACPI table, don't ever try |
| * to delete it |
| */ |
| ObjDesc->Common.Flags |= AOPOBJ_STATIC_POINTER; |
| break; |
| |
| case ACPI_TYPE_METHOD: |
| break; |
| |
| case ACPI_TYPE_LOCAL_REFERENCE: |
| |
| switch (OpInfo->Type) |
| { |
| case AML_TYPE_LOCAL_VARIABLE: |
| |
| /* Local ID (0-7) is (AML opcode - base AML_LOCAL_OP) */ |
| |
| ObjDesc->Reference.Value = ((UINT32) Opcode) - AML_LOCAL_OP; |
| ObjDesc->Reference.Class = ACPI_REFCLASS_LOCAL; |
| |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| Status = AcpiDsMethodDataGetNode (ACPI_REFCLASS_LOCAL, |
| ObjDesc->Reference.Value, WalkState, |
| ACPI_CAST_INDIRECT_PTR (ACPI_NAMESPACE_NODE, |
| &ObjDesc->Reference.Object)); |
| #endif |
| break; |
| |
| case AML_TYPE_METHOD_ARGUMENT: |
| |
| /* Arg ID (0-6) is (AML opcode - base AML_ARG_OP) */ |
| |
| ObjDesc->Reference.Value = ((UINT32) Opcode) - AML_ARG_OP; |
| ObjDesc->Reference.Class = ACPI_REFCLASS_ARG; |
| |
| #ifndef ACPI_NO_METHOD_EXECUTION |
| Status = AcpiDsMethodDataGetNode (ACPI_REFCLASS_ARG, |
| ObjDesc->Reference.Value, WalkState, |
| ACPI_CAST_INDIRECT_PTR (ACPI_NAMESPACE_NODE, |
| &ObjDesc->Reference.Object)); |
| #endif |
| break; |
| |
| default: /* Object name or Debug object */ |
| |
| switch (Op->Common.AmlOpcode) |
| { |
| case AML_INT_NAMEPATH_OP: |
| |
| /* Node was saved in Op */ |
| |
| ObjDesc->Reference.Node = Op->Common.Node; |
| ObjDesc->Reference.Object = Op->Common.Node->Object; |
| ObjDesc->Reference.Class = ACPI_REFCLASS_NAME; |
| break; |
| |
| case AML_DEBUG_OP: |
| |
| ObjDesc->Reference.Class = ACPI_REFCLASS_DEBUG; |
| break; |
| |
| default: |
| |
| ACPI_ERROR ((AE_INFO, |
| "Unimplemented reference type for AML opcode: 0x%4.4X", Opcode)); |
| return_ACPI_STATUS (AE_AML_OPERAND_TYPE); |
| } |
| break; |
| } |
| break; |
| |
| default: |
| |
| ACPI_ERROR ((AE_INFO, "Unimplemented data type: 0x%X", |
| ObjDesc->Common.Type)); |
| |
| Status = AE_AML_OPERAND_TYPE; |
| break; |
| } |
| |
| return_ACPI_STATUS (Status); |
| } |