| /****************************************************************************** |
| * |
| * Module Name: dsfield - Dispatcher field routines |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <contrib/dev/acpica/include/acpi.h> |
| #include <contrib/dev/acpica/include/accommon.h> |
| #include <contrib/dev/acpica/include/amlcode.h> |
| #include <contrib/dev/acpica/include/acdispat.h> |
| #include <contrib/dev/acpica/include/acinterp.h> |
| #include <contrib/dev/acpica/include/acnamesp.h> |
| #include <contrib/dev/acpica/include/acparser.h> |
| |
| |
| #define _COMPONENT ACPI_DISPATCHER |
| ACPI_MODULE_NAME ("dsfield") |
| |
| /* Local prototypes */ |
| |
| #ifdef ACPI_ASL_COMPILER |
| #include <contrib/dev/acpica/include/acdisasm.h> |
| |
| static ACPI_STATUS |
| AcpiDsCreateExternalRegion ( |
| ACPI_STATUS LookupStatus, |
| ACPI_PARSE_OBJECT *Op, |
| char *Path, |
| ACPI_WALK_STATE *WalkState, |
| ACPI_NAMESPACE_NODE **Node); |
| #endif |
| |
| static ACPI_STATUS |
| AcpiDsGetFieldNames ( |
| ACPI_CREATE_FIELD_INFO *Info, |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Arg); |
| |
| |
| #ifdef ACPI_ASL_COMPILER |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsCreateExternalRegion (iASL Disassembler only) |
| * |
| * PARAMETERS: LookupStatus - Status from NsLookup operation |
| * Op - Op containing the Field definition and args |
| * Path - Pathname of the region |
| * ` WalkState - Current method state |
| * Node - Where the new region node is returned |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Add region to the external list if NOT_FOUND. Create a new |
| * region node/object. |
| * |
| ******************************************************************************/ |
| |
| static ACPI_STATUS |
| AcpiDsCreateExternalRegion ( |
| ACPI_STATUS LookupStatus, |
| ACPI_PARSE_OBJECT *Op, |
| char *Path, |
| ACPI_WALK_STATE *WalkState, |
| ACPI_NAMESPACE_NODE **Node) |
| { |
| ACPI_STATUS Status; |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| |
| |
| if (LookupStatus != AE_NOT_FOUND) |
| { |
| return (LookupStatus); |
| } |
| |
| /* |
| * Table disassembly: |
| * OperationRegion not found. Generate an External for it, and |
| * insert the name into the namespace. |
| */ |
| AcpiDmAddOpToExternalList (Op, Path, ACPI_TYPE_REGION, 0, 0); |
| Status = AcpiNsLookup (WalkState->ScopeInfo, Path, ACPI_TYPE_REGION, |
| ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT, WalkState, Node); |
| if (ACPI_FAILURE (Status)) |
| { |
| return (Status); |
| } |
| |
| /* Must create and install a region object for the new node */ |
| |
| ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_REGION); |
| if (!ObjDesc) |
| { |
| return (AE_NO_MEMORY); |
| } |
| |
| ObjDesc->Region.Node = *Node; |
| Status = AcpiNsAttachObject (*Node, ObjDesc, ACPI_TYPE_REGION); |
| return (Status); |
| } |
| #endif |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsCreateBufferField |
| * |
| * PARAMETERS: Op - Current parse op (CreateXXField) |
| * WalkState - Current state |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Execute the CreateField operators: |
| * CreateBitFieldOp, |
| * CreateByteFieldOp, |
| * CreateWordFieldOp, |
| * CreateDwordFieldOp, |
| * CreateQwordFieldOp, |
| * CreateFieldOp (all of which define a field in a buffer) |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDsCreateBufferField ( |
| ACPI_PARSE_OBJECT *Op, |
| ACPI_WALK_STATE *WalkState) |
| { |
| ACPI_PARSE_OBJECT *Arg; |
| ACPI_NAMESPACE_NODE *Node; |
| ACPI_STATUS Status; |
| ACPI_OPERAND_OBJECT *ObjDesc; |
| ACPI_OPERAND_OBJECT *SecondDesc = NULL; |
| UINT32 Flags; |
| |
| |
| ACPI_FUNCTION_TRACE (DsCreateBufferField); |
| |
| |
| /* |
| * Get the NameString argument (name of the new BufferField) |
| */ |
| if (Op->Common.AmlOpcode == AML_CREATE_FIELD_OP) |
| { |
| /* For CreateField, name is the 4th argument */ |
| |
| Arg = AcpiPsGetArg (Op, 3); |
| } |
| else |
| { |
| /* For all other CreateXXXField operators, name is the 3rd argument */ |
| |
| Arg = AcpiPsGetArg (Op, 2); |
| } |
| |
| if (!Arg) |
| { |
| return_ACPI_STATUS (AE_AML_NO_OPERAND); |
| } |
| |
| if (WalkState->DeferredNode) |
| { |
| Node = WalkState->DeferredNode; |
| Status = AE_OK; |
| } |
| else |
| { |
| /* Execute flag should always be set when this function is entered */ |
| |
| if (!(WalkState->ParseFlags & ACPI_PARSE_EXECUTE)) |
| { |
| return_ACPI_STATUS (AE_AML_INTERNAL); |
| } |
| |
| /* Creating new namespace node, should not already exist */ |
| |
| Flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | |
| ACPI_NS_ERROR_IF_FOUND; |
| |
| /* |
| * Mark node temporary if we are executing a normal control |
| * method. (Don't mark if this is a module-level code method) |
| */ |
| if (WalkState->MethodNode && |
| !(WalkState->ParseFlags & ACPI_PARSE_MODULE_LEVEL)) |
| { |
| Flags |= ACPI_NS_TEMPORARY; |
| } |
| |
| /* Enter the NameString into the namespace */ |
| |
| Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.String, |
| ACPI_TYPE_ANY, ACPI_IMODE_LOAD_PASS1, |
| Flags, WalkState, &Node); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_ERROR_NAMESPACE (Arg->Common.Value.String, Status); |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| /* |
| * We could put the returned object (Node) on the object stack for later, |
| * but for now, we will put it in the "op" object that the parser uses, |
| * so we can get it again at the end of this scope. |
| */ |
| Op->Common.Node = Node; |
| |
| /* |
| * If there is no object attached to the node, this node was just created |
| * and we need to create the field object. Otherwise, this was a lookup |
| * of an existing node and we don't want to create the field object again. |
| */ |
| ObjDesc = AcpiNsGetAttachedObject (Node); |
| if (ObjDesc) |
| { |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| /* |
| * The Field definition is not fully parsed at this time. |
| * (We must save the address of the AML for the buffer and index operands) |
| */ |
| |
| /* Create the buffer field object */ |
| |
| ObjDesc = AcpiUtCreateInternalObject (ACPI_TYPE_BUFFER_FIELD); |
| if (!ObjDesc) |
| { |
| Status = AE_NO_MEMORY; |
| goto Cleanup; |
| } |
| |
| /* |
| * Remember location in AML stream of the field unit opcode and operands -- |
| * since the buffer and index operands must be evaluated. |
| */ |
| SecondDesc = ObjDesc->Common.NextObject; |
| SecondDesc->Extra.AmlStart = Op->Named.Data; |
| SecondDesc->Extra.AmlLength = Op->Named.Length; |
| ObjDesc->BufferField.Node = Node; |
| |
| /* Attach constructed field descriptors to parent node */ |
| |
| Status = AcpiNsAttachObject (Node, ObjDesc, ACPI_TYPE_BUFFER_FIELD); |
| if (ACPI_FAILURE (Status)) |
| { |
| goto Cleanup; |
| } |
| |
| |
| Cleanup: |
| |
| /* Remove local reference to the object */ |
| |
| AcpiUtRemoveReference (ObjDesc); |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsGetFieldNames |
| * |
| * PARAMETERS: Info - CreateField info structure |
| * ` WalkState - Current method state |
| * Arg - First parser arg for the field name list |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Process all named fields in a field declaration. Names are |
| * entered into the namespace. |
| * |
| ******************************************************************************/ |
| |
| static ACPI_STATUS |
| AcpiDsGetFieldNames ( |
| ACPI_CREATE_FIELD_INFO *Info, |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Arg) |
| { |
| ACPI_STATUS Status; |
| UINT64 Position; |
| ACPI_PARSE_OBJECT *Child; |
| |
| |
| ACPI_FUNCTION_TRACE_PTR (DsGetFieldNames, Info); |
| |
| |
| /* First field starts at bit zero */ |
| |
| Info->FieldBitPosition = 0; |
| |
| /* Process all elements in the field list (of parse nodes) */ |
| |
| while (Arg) |
| { |
| /* |
| * Four types of field elements are handled: |
| * 1) Name - Enters a new named field into the namespace |
| * 2) Offset - specifies a bit offset |
| * 3) AccessAs - changes the access mode/attributes |
| * 4) Connection - Associate a resource template with the field |
| */ |
| switch (Arg->Common.AmlOpcode) |
| { |
| case AML_INT_RESERVEDFIELD_OP: |
| |
| Position = (UINT64) Info->FieldBitPosition |
| + (UINT64) Arg->Common.Value.Size; |
| |
| if (Position > ACPI_UINT32_MAX) |
| { |
| ACPI_ERROR ((AE_INFO, |
| "Bit offset within field too large (> 0xFFFFFFFF)")); |
| return_ACPI_STATUS (AE_SUPPORT); |
| } |
| |
| Info->FieldBitPosition = (UINT32) Position; |
| break; |
| |
| case AML_INT_ACCESSFIELD_OP: |
| case AML_INT_EXTACCESSFIELD_OP: |
| /* |
| * Get new AccessType, AccessAttribute, and AccessLength fields |
| * -- to be used for all field units that follow, until the |
| * end-of-field or another AccessAs keyword is encountered. |
| * NOTE. These three bytes are encoded in the integer value |
| * of the parseop for convenience. |
| * |
| * In FieldFlags, preserve the flag bits other than the |
| * ACCESS_TYPE bits. |
| */ |
| |
| /* AccessType (ByteAcc, WordAcc, etc.) */ |
| |
| Info->FieldFlags = (UINT8) |
| ((Info->FieldFlags & ~(AML_FIELD_ACCESS_TYPE_MASK)) | |
| ((UINT8) ((UINT32) (Arg->Common.Value.Integer & 0x07)))); |
| |
| /* AccessAttribute (AttribQuick, AttribByte, etc.) */ |
| |
| Info->Attribute = (UINT8) ((Arg->Common.Value.Integer >> 8) & 0xFF); |
| |
| /* AccessLength (for serial/buffer protocols) */ |
| |
| Info->AccessLength = (UINT8) ((Arg->Common.Value.Integer >> 16) & 0xFF); |
| break; |
| |
| case AML_INT_CONNECTION_OP: |
| /* |
| * Clear any previous connection. New connection is used for all |
| * fields that follow, similar to AccessAs |
| */ |
| Info->ResourceBuffer = NULL; |
| Info->ConnectionNode = NULL; |
| Info->PinNumberIndex = 0; |
| |
| /* |
| * A Connection() is either an actual resource descriptor (buffer) |
| * or a named reference to a resource template |
| */ |
| Child = Arg->Common.Value.Arg; |
| if (Child->Common.AmlOpcode == AML_INT_BYTELIST_OP) |
| { |
| Info->ResourceBuffer = Child->Named.Data; |
| Info->ResourceLength = (UINT16) Child->Named.Value.Integer; |
| } |
| else |
| { |
| /* Lookup the Connection() namepath, it should already exist */ |
| |
| Status = AcpiNsLookup (WalkState->ScopeInfo, |
| Child->Common.Value.Name, ACPI_TYPE_ANY, |
| ACPI_IMODE_EXECUTE, ACPI_NS_DONT_OPEN_SCOPE, |
| WalkState, &Info->ConnectionNode); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_ERROR_NAMESPACE (Child->Common.Value.Name, Status); |
| return_ACPI_STATUS (Status); |
| } |
| } |
| break; |
| |
| case AML_INT_NAMEDFIELD_OP: |
| |
| /* Lookup the name, it should already exist */ |
| |
| Status = AcpiNsLookup (WalkState->ScopeInfo, |
| (char *) &Arg->Named.Name, Info->FieldType, |
| ACPI_IMODE_EXECUTE, ACPI_NS_DONT_OPEN_SCOPE, |
| WalkState, &Info->FieldNode); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_ERROR_NAMESPACE ((char *) &Arg->Named.Name, Status); |
| return_ACPI_STATUS (Status); |
| } |
| else |
| { |
| Arg->Common.Node = Info->FieldNode; |
| Info->FieldBitLength = Arg->Common.Value.Size; |
| |
| /* |
| * If there is no object attached to the node, this node was |
| * just created and we need to create the field object. |
| * Otherwise, this was a lookup of an existing node and we |
| * don't want to create the field object again. |
| */ |
| if (!AcpiNsGetAttachedObject (Info->FieldNode)) |
| { |
| Status = AcpiExPrepFieldValue (Info); |
| if (ACPI_FAILURE (Status)) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| } |
| } |
| |
| /* Keep track of bit position for the next field */ |
| |
| Position = (UINT64) Info->FieldBitPosition |
| + (UINT64) Arg->Common.Value.Size; |
| |
| if (Position > ACPI_UINT32_MAX) |
| { |
| ACPI_ERROR ((AE_INFO, |
| "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)", |
| ACPI_CAST_PTR (char, &Info->FieldNode->Name))); |
| return_ACPI_STATUS (AE_SUPPORT); |
| } |
| |
| Info->FieldBitPosition += Info->FieldBitLength; |
| Info->PinNumberIndex++; /* Index relative to previous Connection() */ |
| break; |
| |
| default: |
| |
| ACPI_ERROR ((AE_INFO, |
| "Invalid opcode in field list: 0x%X", Arg->Common.AmlOpcode)); |
| return_ACPI_STATUS (AE_AML_BAD_OPCODE); |
| } |
| |
| Arg = Arg->Common.Next; |
| } |
| |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsCreateField |
| * |
| * PARAMETERS: Op - Op containing the Field definition and args |
| * RegionNode - Object for the containing Operation Region |
| * ` WalkState - Current method state |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Create a new field in the specified operation region |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDsCreateField ( |
| ACPI_PARSE_OBJECT *Op, |
| ACPI_NAMESPACE_NODE *RegionNode, |
| ACPI_WALK_STATE *WalkState) |
| { |
| ACPI_STATUS Status; |
| ACPI_PARSE_OBJECT *Arg; |
| ACPI_CREATE_FIELD_INFO Info; |
| |
| |
| ACPI_FUNCTION_TRACE_PTR (DsCreateField, Op); |
| |
| |
| /* First arg is the name of the parent OpRegion (must already exist) */ |
| |
| Arg = Op->Common.Value.Arg; |
| |
| if (!RegionNode) |
| { |
| Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.Name, |
| ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE, |
| ACPI_NS_SEARCH_PARENT, WalkState, &RegionNode); |
| #ifdef ACPI_ASL_COMPILER |
| Status = AcpiDsCreateExternalRegion (Status, Arg, |
| Arg->Common.Value.Name, WalkState, &RegionNode); |
| #endif |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_ERROR_NAMESPACE (Arg->Common.Value.Name, Status); |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| memset (&Info, 0, sizeof (ACPI_CREATE_FIELD_INFO)); |
| |
| /* Second arg is the field flags */ |
| |
| Arg = Arg->Common.Next; |
| Info.FieldFlags = (UINT8) Arg->Common.Value.Integer; |
| Info.Attribute = 0; |
| |
| /* Each remaining arg is a Named Field */ |
| |
| Info.FieldType = ACPI_TYPE_LOCAL_REGION_FIELD; |
| Info.RegionNode = RegionNode; |
| |
| Status = AcpiDsGetFieldNames (&Info, WalkState, Arg->Common.Next); |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsInitFieldObjects |
| * |
| * PARAMETERS: Op - Op containing the Field definition and args |
| * ` WalkState - Current method state |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: For each "Field Unit" name in the argument list that is |
| * part of the field declaration, enter the name into the |
| * namespace. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDsInitFieldObjects ( |
| ACPI_PARSE_OBJECT *Op, |
| ACPI_WALK_STATE *WalkState) |
| { |
| ACPI_STATUS Status; |
| ACPI_PARSE_OBJECT *Arg = NULL; |
| ACPI_NAMESPACE_NODE *Node; |
| UINT8 Type = 0; |
| UINT32 Flags; |
| |
| |
| ACPI_FUNCTION_TRACE_PTR (DsInitFieldObjects, Op); |
| |
| |
| /* Execute flag should always be set when this function is entered */ |
| |
| if (!(WalkState->ParseFlags & ACPI_PARSE_EXECUTE)) |
| { |
| if (WalkState->ParseFlags & ACPI_PARSE_DEFERRED_OP) |
| { |
| /* BankField Op is deferred, just return OK */ |
| |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| return_ACPI_STATUS (AE_AML_INTERNAL); |
| } |
| |
| /* |
| * Get the FieldList argument for this opcode. This is the start of the |
| * list of field elements. |
| */ |
| switch (WalkState->Opcode) |
| { |
| case AML_FIELD_OP: |
| |
| Arg = AcpiPsGetArg (Op, 2); |
| Type = ACPI_TYPE_LOCAL_REGION_FIELD; |
| break; |
| |
| case AML_BANK_FIELD_OP: |
| |
| Arg = AcpiPsGetArg (Op, 4); |
| Type = ACPI_TYPE_LOCAL_BANK_FIELD; |
| break; |
| |
| case AML_INDEX_FIELD_OP: |
| |
| Arg = AcpiPsGetArg (Op, 3); |
| Type = ACPI_TYPE_LOCAL_INDEX_FIELD; |
| break; |
| |
| default: |
| |
| return_ACPI_STATUS (AE_BAD_PARAMETER); |
| } |
| |
| /* Creating new namespace node(s), should not already exist */ |
| |
| Flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | |
| ACPI_NS_ERROR_IF_FOUND; |
| |
| /* |
| * Mark node(s) temporary if we are executing a normal control |
| * method. (Don't mark if this is a module-level code method) |
| */ |
| if (WalkState->MethodNode && |
| !(WalkState->ParseFlags & ACPI_PARSE_MODULE_LEVEL)) |
| { |
| Flags |= ACPI_NS_TEMPORARY; |
| } |
| |
| /* |
| * Walk the list of entries in the FieldList |
| * Note: FieldList can be of zero length. In this case, Arg will be NULL. |
| */ |
| while (Arg) |
| { |
| /* |
| * Ignore OFFSET/ACCESSAS/CONNECTION terms here; we are only interested |
| * in the field names in order to enter them into the namespace. |
| */ |
| if (Arg->Common.AmlOpcode == AML_INT_NAMEDFIELD_OP) |
| { |
| Status = AcpiNsLookup (WalkState->ScopeInfo, |
| (char *) &Arg->Named.Name, Type, ACPI_IMODE_LOAD_PASS1, |
| Flags, WalkState, &Node); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_ERROR_NAMESPACE ((char *) &Arg->Named.Name, Status); |
| if (Status != AE_ALREADY_EXISTS) |
| { |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Name already exists, just ignore this error */ |
| |
| Status = AE_OK; |
| } |
| |
| Arg->Common.Node = Node; |
| } |
| |
| /* Get the next field element in the list */ |
| |
| Arg = Arg->Common.Next; |
| } |
| |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsCreateBankField |
| * |
| * PARAMETERS: Op - Op containing the Field definition and args |
| * RegionNode - Object for the containing Operation Region |
| * WalkState - Current method state |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Create a new bank field in the specified operation region |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDsCreateBankField ( |
| ACPI_PARSE_OBJECT *Op, |
| ACPI_NAMESPACE_NODE *RegionNode, |
| ACPI_WALK_STATE *WalkState) |
| { |
| ACPI_STATUS Status; |
| ACPI_PARSE_OBJECT *Arg; |
| ACPI_CREATE_FIELD_INFO Info; |
| |
| |
| ACPI_FUNCTION_TRACE_PTR (DsCreateBankField, Op); |
| |
| |
| /* First arg is the name of the parent OpRegion (must already exist) */ |
| |
| Arg = Op->Common.Value.Arg; |
| if (!RegionNode) |
| { |
| Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.Name, |
| ACPI_TYPE_REGION, ACPI_IMODE_EXECUTE, |
| ACPI_NS_SEARCH_PARENT, WalkState, &RegionNode); |
| #ifdef ACPI_ASL_COMPILER |
| Status = AcpiDsCreateExternalRegion (Status, Arg, |
| Arg->Common.Value.Name, WalkState, &RegionNode); |
| #endif |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_ERROR_NAMESPACE (Arg->Common.Value.Name, Status); |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| /* Second arg is the Bank Register (Field) (must already exist) */ |
| |
| Arg = Arg->Common.Next; |
| Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.String, |
| ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, |
| ACPI_NS_SEARCH_PARENT, WalkState, &Info.RegisterNode); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_ERROR_NAMESPACE (Arg->Common.Value.String, Status); |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* |
| * Third arg is the BankValue |
| * This arg is a TermArg, not a constant |
| * It will be evaluated later, by AcpiDsEvalBankFieldOperands |
| */ |
| Arg = Arg->Common.Next; |
| |
| /* Fourth arg is the field flags */ |
| |
| Arg = Arg->Common.Next; |
| Info.FieldFlags = (UINT8) Arg->Common.Value.Integer; |
| |
| /* Each remaining arg is a Named Field */ |
| |
| Info.FieldType = ACPI_TYPE_LOCAL_BANK_FIELD; |
| Info.RegionNode = RegionNode; |
| |
| /* |
| * Use Info.DataRegisterNode to store BankField Op |
| * It's safe because DataRegisterNode will never be used when create bank field |
| * We store AmlStart and AmlLength in the BankField Op for late evaluation |
| * Used in AcpiExPrepFieldValue(Info) |
| * |
| * TBD: Or, should we add a field in ACPI_CREATE_FIELD_INFO, like "void *ParentOp"? |
| */ |
| Info.DataRegisterNode = (ACPI_NAMESPACE_NODE*) Op; |
| |
| Status = AcpiDsGetFieldNames (&Info, WalkState, Arg->Common.Next); |
| return_ACPI_STATUS (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDsCreateIndexField |
| * |
| * PARAMETERS: Op - Op containing the Field definition and args |
| * RegionNode - Object for the containing Operation Region |
| * ` WalkState - Current method state |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Create a new index field in the specified operation region |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDsCreateIndexField ( |
| ACPI_PARSE_OBJECT *Op, |
| ACPI_NAMESPACE_NODE *RegionNode, |
| ACPI_WALK_STATE *WalkState) |
| { |
| ACPI_STATUS Status; |
| ACPI_PARSE_OBJECT *Arg; |
| ACPI_CREATE_FIELD_INFO Info; |
| |
| |
| ACPI_FUNCTION_TRACE_PTR (DsCreateIndexField, Op); |
| |
| |
| /* First arg is the name of the Index register (must already exist) */ |
| |
| Arg = Op->Common.Value.Arg; |
| Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.String, |
| ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, |
| ACPI_NS_SEARCH_PARENT, WalkState, &Info.RegisterNode); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_ERROR_NAMESPACE (Arg->Common.Value.String, Status); |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Second arg is the data register (must already exist) */ |
| |
| Arg = Arg->Common.Next; |
| Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.String, |
| ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE, |
| ACPI_NS_SEARCH_PARENT, WalkState, &Info.DataRegisterNode); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_ERROR_NAMESPACE (Arg->Common.Value.String, Status); |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Next arg is the field flags */ |
| |
| Arg = Arg->Common.Next; |
| Info.FieldFlags = (UINT8) Arg->Common.Value.Integer; |
| |
| /* Each remaining arg is a Named Field */ |
| |
| Info.FieldType = ACPI_TYPE_LOCAL_INDEX_FIELD; |
| Info.RegionNode = RegionNode; |
| |
| Status = AcpiDsGetFieldNames (&Info, WalkState, Arg->Common.Next); |
| return_ACPI_STATUS (Status); |
| } |