| /******************************************************************************* |
| * |
| * Module Name: dbxface - AML Debugger external interfaces |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2015, Intel Corp. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <contrib/dev/acpica/include/acpi.h> |
| #include <contrib/dev/acpica/include/accommon.h> |
| #include <contrib/dev/acpica/include/amlcode.h> |
| #include <contrib/dev/acpica/include/acdebug.h> |
| |
| |
| #define _COMPONENT ACPI_CA_DEBUGGER |
| ACPI_MODULE_NAME ("dbxface") |
| |
| |
| /* Local prototypes */ |
| |
| static ACPI_STATUS |
| AcpiDbStartCommand ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Op); |
| |
| #ifdef ACPI_OBSOLETE_FUNCTIONS |
| void |
| AcpiDbMethodEnd ( |
| ACPI_WALK_STATE *WalkState); |
| #endif |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDbStartCommand |
| * |
| * PARAMETERS: WalkState - Current walk |
| * Op - Current executing Op, from AML interpreter |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Enter debugger command loop |
| * |
| ******************************************************************************/ |
| |
| static ACPI_STATUS |
| AcpiDbStartCommand ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Op) |
| { |
| ACPI_STATUS Status; |
| |
| |
| /* TBD: [Investigate] are there namespace locking issues here? */ |
| |
| /* AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); */ |
| |
| /* Go into the command loop and await next user command */ |
| |
| |
| AcpiGbl_MethodExecuting = TRUE; |
| Status = AE_CTRL_TRUE; |
| while (Status == AE_CTRL_TRUE) |
| { |
| if (AcpiGbl_DebuggerConfiguration == DEBUGGER_MULTI_THREADED) |
| { |
| /* Handshake with the front-end that gets user command lines */ |
| |
| Status = AcpiUtReleaseMutex (ACPI_MTX_DEBUG_CMD_COMPLETE); |
| if (ACPI_FAILURE (Status)) |
| { |
| return (Status); |
| } |
| Status = AcpiUtAcquireMutex (ACPI_MTX_DEBUG_CMD_READY); |
| if (ACPI_FAILURE (Status)) |
| { |
| return (Status); |
| } |
| } |
| else |
| { |
| /* Single threaded, we must get a command line ourselves */ |
| |
| /* Force output to console until a command is entered */ |
| |
| AcpiDbSetOutputDestination (ACPI_DB_CONSOLE_OUTPUT); |
| |
| /* Different prompt if method is executing */ |
| |
| if (!AcpiGbl_MethodExecuting) |
| { |
| AcpiOsPrintf ("%1c ", ACPI_DEBUGGER_COMMAND_PROMPT); |
| } |
| else |
| { |
| AcpiOsPrintf ("%1c ", ACPI_DEBUGGER_EXECUTE_PROMPT); |
| } |
| |
| /* Get the user input line */ |
| |
| Status = AcpiOsGetLine (AcpiGbl_DbLineBuf, |
| ACPI_DB_LINE_BUFFER_SIZE, NULL); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_EXCEPTION ((AE_INFO, Status, |
| "While parsing command line")); |
| return (Status); |
| } |
| } |
| |
| Status = AcpiDbCommandDispatch (AcpiGbl_DbLineBuf, WalkState, Op); |
| } |
| |
| /* AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); */ |
| |
| return (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDbSingleStep |
| * |
| * PARAMETERS: WalkState - Current walk |
| * Op - Current executing op (from aml interpreter) |
| * OpcodeClass - Class of the current AML Opcode |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Called just before execution of an AML opcode. |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiDbSingleStep ( |
| ACPI_WALK_STATE *WalkState, |
| ACPI_PARSE_OBJECT *Op, |
| UINT32 OpcodeClass) |
| { |
| ACPI_PARSE_OBJECT *Next; |
| ACPI_STATUS Status = AE_OK; |
| UINT32 OriginalDebugLevel; |
| ACPI_PARSE_OBJECT *DisplayOp; |
| ACPI_PARSE_OBJECT *ParentOp; |
| UINT32 AmlOffset; |
| |
| |
| ACPI_FUNCTION_ENTRY (); |
| |
| |
| /* Check the abort flag */ |
| |
| if (AcpiGbl_AbortMethod) |
| { |
| AcpiGbl_AbortMethod = FALSE; |
| return (AE_ABORT_METHOD); |
| } |
| |
| AmlOffset = (UINT32) ACPI_PTR_DIFF (Op->Common.Aml, |
| WalkState->ParserState.AmlStart); |
| |
| /* Check for single-step breakpoint */ |
| |
| if (WalkState->MethodBreakpoint && |
| (WalkState->MethodBreakpoint <= AmlOffset)) |
| { |
| /* Check if the breakpoint has been reached or passed */ |
| /* Hit the breakpoint, resume single step, reset breakpoint */ |
| |
| AcpiOsPrintf ("***Break*** at AML offset %X\n", AmlOffset); |
| AcpiGbl_CmSingleStep = TRUE; |
| AcpiGbl_StepToNextCall = FALSE; |
| WalkState->MethodBreakpoint = 0; |
| } |
| |
| /* Check for user breakpoint (Must be on exact Aml offset) */ |
| |
| else if (WalkState->UserBreakpoint && |
| (WalkState->UserBreakpoint == AmlOffset)) |
| { |
| AcpiOsPrintf ("***UserBreakpoint*** at AML offset %X\n", |
| AmlOffset); |
| AcpiGbl_CmSingleStep = TRUE; |
| AcpiGbl_StepToNextCall = FALSE; |
| WalkState->MethodBreakpoint = 0; |
| } |
| |
| /* |
| * Check if this is an opcode that we are interested in -- |
| * namely, opcodes that have arguments |
| */ |
| if (Op->Common.AmlOpcode == AML_INT_NAMEDFIELD_OP) |
| { |
| return (AE_OK); |
| } |
| |
| switch (OpcodeClass) |
| { |
| case AML_CLASS_UNKNOWN: |
| case AML_CLASS_ARGUMENT: /* constants, literals, etc. do nothing */ |
| |
| return (AE_OK); |
| |
| default: |
| |
| /* All other opcodes -- continue */ |
| break; |
| } |
| |
| /* |
| * Under certain debug conditions, display this opcode and its operands |
| */ |
| if ((AcpiGbl_DbOutputToFile) || |
| (AcpiGbl_CmSingleStep) || |
| (AcpiDbgLevel & ACPI_LV_PARSE)) |
| { |
| if ((AcpiGbl_DbOutputToFile) || |
| (AcpiDbgLevel & ACPI_LV_PARSE)) |
| { |
| AcpiOsPrintf ("\n[AmlDebug] Next AML Opcode to execute:\n"); |
| } |
| |
| /* |
| * Display this op (and only this op - zero out the NEXT field |
| * temporarily, and disable parser trace output for the duration of |
| * the display because we don't want the extraneous debug output) |
| */ |
| OriginalDebugLevel = AcpiDbgLevel; |
| AcpiDbgLevel &= ~(ACPI_LV_PARSE | ACPI_LV_FUNCTIONS); |
| Next = Op->Common.Next; |
| Op->Common.Next = NULL; |
| |
| |
| DisplayOp = Op; |
| ParentOp = Op->Common.Parent; |
| if (ParentOp) |
| { |
| if ((WalkState->ControlState) && |
| (WalkState->ControlState->Common.State == |
| ACPI_CONTROL_PREDICATE_EXECUTING)) |
| { |
| /* |
| * We are executing the predicate of an IF or WHILE statement |
| * Search upwards for the containing IF or WHILE so that the |
| * entire predicate can be displayed. |
| */ |
| while (ParentOp) |
| { |
| if ((ParentOp->Common.AmlOpcode == AML_IF_OP) || |
| (ParentOp->Common.AmlOpcode == AML_WHILE_OP)) |
| { |
| DisplayOp = ParentOp; |
| break; |
| } |
| ParentOp = ParentOp->Common.Parent; |
| } |
| } |
| else |
| { |
| while (ParentOp) |
| { |
| if ((ParentOp->Common.AmlOpcode == AML_IF_OP) || |
| (ParentOp->Common.AmlOpcode == AML_ELSE_OP) || |
| (ParentOp->Common.AmlOpcode == AML_SCOPE_OP) || |
| (ParentOp->Common.AmlOpcode == AML_METHOD_OP) || |
| (ParentOp->Common.AmlOpcode == AML_WHILE_OP)) |
| { |
| break; |
| } |
| DisplayOp = ParentOp; |
| ParentOp = ParentOp->Common.Parent; |
| } |
| } |
| } |
| |
| /* Now we can display it */ |
| |
| #ifdef ACPI_DISASSEMBLER |
| AcpiDmDisassemble (WalkState, DisplayOp, ACPI_UINT32_MAX); |
| #endif |
| |
| if ((Op->Common.AmlOpcode == AML_IF_OP) || |
| (Op->Common.AmlOpcode == AML_WHILE_OP)) |
| { |
| if (WalkState->ControlState->Common.Value) |
| { |
| AcpiOsPrintf ("Predicate = [True], IF block was executed\n"); |
| } |
| else |
| { |
| AcpiOsPrintf ("Predicate = [False], Skipping IF block\n"); |
| } |
| } |
| else if (Op->Common.AmlOpcode == AML_ELSE_OP) |
| { |
| AcpiOsPrintf ("Predicate = [False], ELSE block was executed\n"); |
| } |
| |
| /* Restore everything */ |
| |
| Op->Common.Next = Next; |
| AcpiOsPrintf ("\n"); |
| if ((AcpiGbl_DbOutputToFile) || |
| (AcpiDbgLevel & ACPI_LV_PARSE)) |
| { |
| AcpiOsPrintf ("\n"); |
| } |
| AcpiDbgLevel = OriginalDebugLevel; |
| } |
| |
| /* If we are not single stepping, just continue executing the method */ |
| |
| if (!AcpiGbl_CmSingleStep) |
| { |
| return (AE_OK); |
| } |
| |
| /* |
| * If we are executing a step-to-call command, |
| * Check if this is a method call. |
| */ |
| if (AcpiGbl_StepToNextCall) |
| { |
| if (Op->Common.AmlOpcode != AML_INT_METHODCALL_OP) |
| { |
| /* Not a method call, just keep executing */ |
| |
| return (AE_OK); |
| } |
| |
| /* Found a method call, stop executing */ |
| |
| AcpiGbl_StepToNextCall = FALSE; |
| } |
| |
| /* |
| * If the next opcode is a method call, we will "step over" it |
| * by default. |
| */ |
| if (Op->Common.AmlOpcode == AML_INT_METHODCALL_OP) |
| { |
| /* Force no more single stepping while executing called method */ |
| |
| AcpiGbl_CmSingleStep = FALSE; |
| |
| /* |
| * Set the breakpoint on/before the call, it will stop execution |
| * as soon as we return |
| */ |
| WalkState->MethodBreakpoint = 1; /* Must be non-zero! */ |
| } |
| |
| |
| Status = AcpiDbStartCommand (WalkState, Op); |
| |
| /* User commands complete, continue execution of the interrupted method */ |
| |
| return (Status); |
| } |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiInitializeDebugger |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Init and start debugger |
| * |
| ******************************************************************************/ |
| |
| ACPI_STATUS |
| AcpiInitializeDebugger ( |
| void) |
| { |
| ACPI_STATUS Status; |
| |
| |
| ACPI_FUNCTION_TRACE (AcpiInitializeDebugger); |
| |
| |
| /* Init globals */ |
| |
| AcpiGbl_DbBuffer = NULL; |
| AcpiGbl_DbFilename = NULL; |
| AcpiGbl_DbOutputToFile = FALSE; |
| |
| AcpiGbl_DbDebugLevel = ACPI_LV_VERBOSITY2; |
| AcpiGbl_DbConsoleDebugLevel = ACPI_NORMAL_DEFAULT | ACPI_LV_TABLES; |
| AcpiGbl_DbOutputFlags = ACPI_DB_CONSOLE_OUTPUT; |
| |
| AcpiGbl_DbOpt_NoIniMethods = FALSE; |
| |
| AcpiGbl_DbBuffer = AcpiOsAllocate (ACPI_DEBUG_BUFFER_SIZE); |
| if (!AcpiGbl_DbBuffer) |
| { |
| return_ACPI_STATUS (AE_NO_MEMORY); |
| } |
| memset (AcpiGbl_DbBuffer, 0, ACPI_DEBUG_BUFFER_SIZE); |
| |
| /* Initial scope is the root */ |
| |
| AcpiGbl_DbScopeBuf [0] = AML_ROOT_PREFIX; |
| AcpiGbl_DbScopeBuf [1] = 0; |
| AcpiGbl_DbScopeNode = AcpiGbl_RootNode; |
| |
| /* |
| * If configured for multi-thread support, the debug executor runs in |
| * a separate thread so that the front end can be in another address |
| * space, environment, or even another machine. |
| */ |
| if (AcpiGbl_DebuggerConfiguration & DEBUGGER_MULTI_THREADED) |
| { |
| /* These were created with one unit, grab it */ |
| |
| Status = AcpiUtAcquireMutex (ACPI_MTX_DEBUG_CMD_COMPLETE); |
| if (ACPI_FAILURE (Status)) |
| { |
| AcpiOsPrintf ("Could not get debugger mutex\n"); |
| return_ACPI_STATUS (Status); |
| } |
| |
| Status = AcpiUtAcquireMutex (ACPI_MTX_DEBUG_CMD_READY); |
| if (ACPI_FAILURE (Status)) |
| { |
| AcpiOsPrintf ("Could not get debugger mutex\n"); |
| return_ACPI_STATUS (Status); |
| } |
| |
| /* Create the debug execution thread to execute commands */ |
| |
| Status = AcpiOsExecute (OSL_DEBUGGER_THREAD, |
| AcpiDbExecuteThread, NULL); |
| if (ACPI_FAILURE (Status)) |
| { |
| ACPI_EXCEPTION ((AE_INFO, Status, |
| "Could not start debugger thread")); |
| return_ACPI_STATUS (Status); |
| } |
| } |
| |
| return_ACPI_STATUS (AE_OK); |
| } |
| |
| ACPI_EXPORT_SYMBOL (AcpiInitializeDebugger) |
| |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiTerminateDebugger |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Stop debugger |
| * |
| ******************************************************************************/ |
| |
| void |
| AcpiTerminateDebugger ( |
| void) |
| { |
| |
| if (AcpiGbl_DbBuffer) |
| { |
| AcpiOsFree (AcpiGbl_DbBuffer); |
| AcpiGbl_DbBuffer = NULL; |
| } |
| |
| /* Ensure that debug output is now disabled */ |
| |
| AcpiGbl_DbOutputFlags = ACPI_DB_DISABLE_OUTPUT; |
| } |
| |
| ACPI_EXPORT_SYMBOL (AcpiTerminateDebugger) |
| |
| |
| #ifdef ACPI_OBSOLETE_FUNCTIONS |
| /******************************************************************************* |
| * |
| * FUNCTION: AcpiDbMethodEnd |
| * |
| * PARAMETERS: WalkState - Current walk |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Called at method termination |
| * |
| ******************************************************************************/ |
| |
| void |
| AcpiDbMethodEnd ( |
| ACPI_WALK_STATE *WalkState) |
| { |
| |
| if (!AcpiGbl_CmSingleStep) |
| { |
| return; |
| } |
| |
| AcpiOsPrintf ("<Method Terminating>\n"); |
| |
| AcpiDbStartCommand (WalkState, NULL); |
| } |
| #endif |