| /*- |
| * Copyright (c) 2002 McAfee, Inc. |
| * All rights reserved. |
| * |
| * This software was developed for the FreeBSD Project by Marshall |
| * Kirk McKusick and McAfee Research,, the Security Research Division of |
| * McAfee, Inc. under DARPA/SPAWAR contract N66001-01-C-8035 ("CBOSS"), as |
| * part of the DARPA CHATS research program |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| /* |
| * CDDL HEADER START |
| * |
| * The contents of this file are subject to the terms of the |
| * Common Development and Distribution License (the "License"). |
| * You may not use this file except in compliance with the License. |
| * |
| * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE |
| * or http://www.opensolaris.org/os/licensing. |
| * See the License for the specific language governing permissions |
| * and limitations under the License. |
| * |
| * When distributing Covered Code, include this CDDL HEADER in each |
| * file and include the License file at usr/src/OPENSOLARIS.LICENSE. |
| * If applicable, add the following below this CDDL HEADER, with the |
| * fields enclosed by brackets "[]" replaced with your own identifying |
| * information: Portions Copyright [yyyy] [name of copyright owner] |
| * |
| * CDDL HEADER END |
| */ |
| /* |
| * Copyright 2009 Sun Microsystems, Inc. All rights reserved. |
| * Use is subject to license terms. |
| */ |
| /* |
| * Copyright 2013 by Saso Kiselkov. All rights reserved. |
| */ |
| /* |
| * Copyright (c) 2013 by Delphix. All rights reserved. |
| */ |
| |
| #define MAXNAMELEN 256 |
| |
| #define _NOTE(s) |
| |
| typedef enum { B_FALSE, B_TRUE } boolean_t; |
| |
| /* CRC64 table */ |
| #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */ |
| |
| /* |
| * Macros for various sorts of alignment and rounding when the alignment |
| * is known to be a power of 2. |
| */ |
| #define P2ALIGN(x, align) ((x) & -(align)) |
| #define P2PHASE(x, align) ((x) & ((align) - 1)) |
| #define P2NPHASE(x, align) (-(x) & ((align) - 1)) |
| #define P2ROUNDUP(x, align) (-(-(x) & -(align))) |
| #define P2END(x, align) (-(~(x) & -(align))) |
| #define P2PHASEUP(x, align, phase) ((phase) - (((phase) - (x)) & -(align))) |
| #define P2BOUNDARY(off, len, align) (((off) ^ ((off) + (len) - 1)) > (align) - 1) |
| |
| /* |
| * General-purpose 32-bit and 64-bit bitfield encodings. |
| */ |
| #define BF32_DECODE(x, low, len) P2PHASE((x) >> (low), 1U << (len)) |
| #define BF64_DECODE(x, low, len) P2PHASE((x) >> (low), 1ULL << (len)) |
| #define BF32_ENCODE(x, low, len) (P2PHASE((x), 1U << (len)) << (low)) |
| #define BF64_ENCODE(x, low, len) (P2PHASE((x), 1ULL << (len)) << (low)) |
| |
| #define BF32_GET(x, low, len) BF32_DECODE(x, low, len) |
| #define BF64_GET(x, low, len) BF64_DECODE(x, low, len) |
| |
| #define BF32_SET(x, low, len, val) \ |
| ((x) ^= BF32_ENCODE((x >> low) ^ (val), low, len)) |
| #define BF64_SET(x, low, len, val) \ |
| ((x) ^= BF64_ENCODE((x >> low) ^ (val), low, len)) |
| |
| #define BF32_GET_SB(x, low, len, shift, bias) \ |
| ((BF32_GET(x, low, len) + (bias)) << (shift)) |
| #define BF64_GET_SB(x, low, len, shift, bias) \ |
| ((BF64_GET(x, low, len) + (bias)) << (shift)) |
| |
| #define BF32_SET_SB(x, low, len, shift, bias, val) \ |
| BF32_SET(x, low, len, ((val) >> (shift)) - (bias)) |
| #define BF64_SET_SB(x, low, len, shift, bias, val) \ |
| BF64_SET(x, low, len, ((val) >> (shift)) - (bias)) |
| |
| /* |
| * Macros to reverse byte order |
| */ |
| #define BSWAP_8(x) ((x) & 0xff) |
| #define BSWAP_16(x) ((BSWAP_8(x) << 8) | BSWAP_8((x) >> 8)) |
| #define BSWAP_32(x) ((BSWAP_16(x) << 16) | BSWAP_16((x) >> 16)) |
| #define BSWAP_64(x) ((BSWAP_32(x) << 32) | BSWAP_32((x) >> 32)) |
| |
| #define SPA_MINBLOCKSHIFT 9 |
| #define SPA_OLDMAXBLOCKSHIFT 17 |
| #define SPA_MAXBLOCKSHIFT 24 |
| #define SPA_MINBLOCKSIZE (1ULL << SPA_MINBLOCKSHIFT) |
| #define SPA_OLDMAXBLOCKSIZE (1ULL << SPA_OLDMAXBLOCKSHIFT) |
| #define SPA_MAXBLOCKSIZE (1ULL << SPA_MAXBLOCKSHIFT) |
| |
| /* |
| * The DVA size encodings for LSIZE and PSIZE support blocks up to 32MB. |
| * The ASIZE encoding should be at least 64 times larger (6 more bits) |
| * to support up to 4-way RAID-Z mirror mode with worst-case gang block |
| * overhead, three DVAs per bp, plus one more bit in case we do anything |
| * else that expands the ASIZE. |
| */ |
| #define SPA_LSIZEBITS 16 /* LSIZE up to 32M (2^16 * 512) */ |
| #define SPA_PSIZEBITS 16 /* PSIZE up to 32M (2^16 * 512) */ |
| #define SPA_ASIZEBITS 24 /* ASIZE up to 64 times larger */ |
| |
| /* |
| * All SPA data is represented by 128-bit data virtual addresses (DVAs). |
| * The members of the dva_t should be considered opaque outside the SPA. |
| */ |
| typedef struct dva { |
| uint64_t dva_word[2]; |
| } dva_t; |
| |
| /* |
| * Each block has a 256-bit checksum -- strong enough for cryptographic hashes. |
| */ |
| typedef struct zio_cksum { |
| uint64_t zc_word[4]; |
| } zio_cksum_t; |
| |
| /* |
| * Some checksums/hashes need a 256-bit initialization salt. This salt is kept |
| * secret and is suitable for use in MAC algorithms as the key. |
| */ |
| typedef struct zio_cksum_salt { |
| uint8_t zcs_bytes[32]; |
| } zio_cksum_salt_t; |
| |
| /* |
| * Each block is described by its DVAs, time of birth, checksum, etc. |
| * The word-by-word, bit-by-bit layout of the blkptr is as follows: |
| * |
| * 64 56 48 40 32 24 16 8 0 |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 0 | vdev1 | GRID | ASIZE | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 1 |G| offset1 | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 2 | vdev2 | GRID | ASIZE | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 3 |G| offset2 | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 4 | vdev3 | GRID | ASIZE | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 5 |G| offset3 | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 6 |BDX|lvl| type | cksum |E| comp| PSIZE | LSIZE | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 7 | padding | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 8 | padding | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 9 | physical birth txg | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * a | logical birth txg | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * b | fill count | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * c | checksum[0] | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * d | checksum[1] | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * e | checksum[2] | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * f | checksum[3] | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * |
| * Legend: |
| * |
| * vdev virtual device ID |
| * offset offset into virtual device |
| * LSIZE logical size |
| * PSIZE physical size (after compression) |
| * ASIZE allocated size (including RAID-Z parity and gang block headers) |
| * GRID RAID-Z layout information (reserved for future use) |
| * cksum checksum function |
| * comp compression function |
| * G gang block indicator |
| * B byteorder (endianness) |
| * D dedup |
| * X encryption (on version 30, which is not supported) |
| * E blkptr_t contains embedded data (see below) |
| * lvl level of indirection |
| * type DMU object type |
| * phys birth txg of block allocation; zero if same as logical birth txg |
| * log. birth transaction group in which the block was logically born |
| * fill count number of non-zero blocks under this bp |
| * checksum[4] 256-bit checksum of the data this bp describes |
| */ |
| |
| /* |
| * "Embedded" blkptr_t's don't actually point to a block, instead they |
| * have a data payload embedded in the blkptr_t itself. See the comment |
| * in blkptr.c for more details. |
| * |
| * The blkptr_t is laid out as follows: |
| * |
| * 64 56 48 40 32 24 16 8 0 |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 0 | payload | |
| * 1 | payload | |
| * 2 | payload | |
| * 3 | payload | |
| * 4 | payload | |
| * 5 | payload | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 6 |BDX|lvl| type | etype |E| comp| PSIZE| LSIZE | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * 7 | payload | |
| * 8 | payload | |
| * 9 | payload | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * a | logical birth txg | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * b | payload | |
| * c | payload | |
| * d | payload | |
| * e | payload | |
| * f | payload | |
| * +-------+-------+-------+-------+-------+-------+-------+-------+ |
| * |
| * Legend: |
| * |
| * payload contains the embedded data |
| * B (byteorder) byteorder (endianness) |
| * D (dedup) padding (set to zero) |
| * X encryption (set to zero; see above) |
| * E (embedded) set to one |
| * lvl indirection level |
| * type DMU object type |
| * etype how to interpret embedded data (BP_EMBEDDED_TYPE_*) |
| * comp compression function of payload |
| * PSIZE size of payload after compression, in bytes |
| * LSIZE logical size of payload, in bytes |
| * note that 25 bits is enough to store the largest |
| * "normal" BP's LSIZE (2^16 * 2^9) in bytes |
| * log. birth transaction group in which the block was logically born |
| * |
| * Note that LSIZE and PSIZE are stored in bytes, whereas for non-embedded |
| * bp's they are stored in units of SPA_MINBLOCKSHIFT. |
| * Generally, the generic BP_GET_*() macros can be used on embedded BP's. |
| * The B, D, X, lvl, type, and comp fields are stored the same as with normal |
| * BP's so the BP_SET_* macros can be used with them. etype, PSIZE, LSIZE must |
| * be set with the BPE_SET_* macros. BP_SET_EMBEDDED() should be called before |
| * other macros, as they assert that they are only used on BP's of the correct |
| * "embedded-ness". |
| */ |
| |
| #define BPE_GET_ETYPE(bp) \ |
| (ASSERT(BP_IS_EMBEDDED(bp)), \ |
| BF64_GET((bp)->blk_prop, 40, 8)) |
| #define BPE_SET_ETYPE(bp, t) do { \ |
| ASSERT(BP_IS_EMBEDDED(bp)); \ |
| BF64_SET((bp)->blk_prop, 40, 8, t); \ |
| _NOTE(CONSTCOND) } while (0) |
| |
| #define BPE_GET_LSIZE(bp) \ |
| (ASSERT(BP_IS_EMBEDDED(bp)), \ |
| BF64_GET_SB((bp)->blk_prop, 0, 25, 0, 1)) |
| #define BPE_SET_LSIZE(bp, x) do { \ |
| ASSERT(BP_IS_EMBEDDED(bp)); \ |
| BF64_SET_SB((bp)->blk_prop, 0, 25, 0, 1, x); \ |
| _NOTE(CONSTCOND) } while (0) |
| |
| #define BPE_GET_PSIZE(bp) \ |
| (ASSERT(BP_IS_EMBEDDED(bp)), \ |
| BF64_GET_SB((bp)->blk_prop, 25, 7, 0, 1)) |
| #define BPE_SET_PSIZE(bp, x) do { \ |
| ASSERT(BP_IS_EMBEDDED(bp)); \ |
| BF64_SET_SB((bp)->blk_prop, 25, 7, 0, 1, x); \ |
| _NOTE(CONSTCOND) } while (0) |
| |
| typedef enum bp_embedded_type { |
| BP_EMBEDDED_TYPE_DATA, |
| BP_EMBEDDED_TYPE_RESERVED, /* Reserved for an unintegrated feature. */ |
| NUM_BP_EMBEDDED_TYPES = BP_EMBEDDED_TYPE_RESERVED |
| } bp_embedded_type_t; |
| |
| #define BPE_NUM_WORDS 14 |
| #define BPE_PAYLOAD_SIZE (BPE_NUM_WORDS * sizeof (uint64_t)) |
| #define BPE_IS_PAYLOADWORD(bp, wp) \ |
| ((wp) != &(bp)->blk_prop && (wp) != &(bp)->blk_birth) |
| |
| #define SPA_BLKPTRSHIFT 7 /* blkptr_t is 128 bytes */ |
| #define SPA_DVAS_PER_BP 3 /* Number of DVAs in a bp */ |
| |
| typedef struct blkptr { |
| dva_t blk_dva[SPA_DVAS_PER_BP]; /* Data Virtual Addresses */ |
| uint64_t blk_prop; /* size, compression, type, etc */ |
| uint64_t blk_pad[2]; /* Extra space for the future */ |
| uint64_t blk_phys_birth; /* txg when block was allocated */ |
| uint64_t blk_birth; /* transaction group at birth */ |
| uint64_t blk_fill; /* fill count */ |
| zio_cksum_t blk_cksum; /* 256-bit checksum */ |
| } blkptr_t; |
| |
| /* |
| * Macros to get and set fields in a bp or DVA. |
| */ |
| #define DVA_GET_ASIZE(dva) \ |
| BF64_GET_SB((dva)->dva_word[0], 0, SPA_ASIZEBITS, SPA_MINBLOCKSHIFT, 0) |
| #define DVA_SET_ASIZE(dva, x) \ |
| BF64_SET_SB((dva)->dva_word[0], 0, SPA_ASIZEBITS, \ |
| SPA_MINBLOCKSHIFT, 0, x) |
| |
| #define DVA_GET_GRID(dva) BF64_GET((dva)->dva_word[0], 24, 8) |
| #define DVA_SET_GRID(dva, x) BF64_SET((dva)->dva_word[0], 24, 8, x) |
| |
| #define DVA_GET_VDEV(dva) BF64_GET((dva)->dva_word[0], 32, 32) |
| #define DVA_SET_VDEV(dva, x) BF64_SET((dva)->dva_word[0], 32, 32, x) |
| |
| #define DVA_GET_OFFSET(dva) \ |
| BF64_GET_SB((dva)->dva_word[1], 0, 63, SPA_MINBLOCKSHIFT, 0) |
| #define DVA_SET_OFFSET(dva, x) \ |
| BF64_SET_SB((dva)->dva_word[1], 0, 63, SPA_MINBLOCKSHIFT, 0, x) |
| |
| #define DVA_GET_GANG(dva) BF64_GET((dva)->dva_word[1], 63, 1) |
| #define DVA_SET_GANG(dva, x) BF64_SET((dva)->dva_word[1], 63, 1, x) |
| |
| #define BP_GET_LSIZE(bp) \ |
| (BP_IS_EMBEDDED(bp) ? \ |
| (BPE_GET_ETYPE(bp) == BP_EMBEDDED_TYPE_DATA ? BPE_GET_LSIZE(bp) : 0): \ |
| BF64_GET_SB((bp)->blk_prop, 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1)) |
| #define BP_SET_LSIZE(bp, x) do { \ |
| ASSERT(!BP_IS_EMBEDDED(bp)); \ |
| BF64_SET_SB((bp)->blk_prop, \ |
| 0, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1, x); \ |
| _NOTE(CONSTCOND) } while (0) |
| |
| #define BP_GET_PSIZE(bp) \ |
| BF64_GET_SB((bp)->blk_prop, 16, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1) |
| #define BP_SET_PSIZE(bp, x) \ |
| BF64_SET_SB((bp)->blk_prop, 16, SPA_LSIZEBITS, SPA_MINBLOCKSHIFT, 1, x) |
| |
| #define BP_GET_COMPRESS(bp) BF64_GET((bp)->blk_prop, 32, 7) |
| #define BP_SET_COMPRESS(bp, x) BF64_SET((bp)->blk_prop, 32, 7, x) |
| |
| #define BP_GET_CHECKSUM(bp) BF64_GET((bp)->blk_prop, 40, 8) |
| #define BP_SET_CHECKSUM(bp, x) BF64_SET((bp)->blk_prop, 40, 8, x) |
| |
| #define BP_GET_TYPE(bp) BF64_GET((bp)->blk_prop, 48, 8) |
| #define BP_SET_TYPE(bp, x) BF64_SET((bp)->blk_prop, 48, 8, x) |
| |
| #define BP_GET_LEVEL(bp) BF64_GET((bp)->blk_prop, 56, 5) |
| #define BP_SET_LEVEL(bp, x) BF64_SET((bp)->blk_prop, 56, 5, x) |
| |
| #define BP_IS_EMBEDDED(bp) BF64_GET((bp)->blk_prop, 39, 1) |
| |
| #define BP_GET_DEDUP(bp) BF64_GET((bp)->blk_prop, 62, 1) |
| #define BP_SET_DEDUP(bp, x) BF64_SET((bp)->blk_prop, 62, 1, x) |
| |
| #define BP_GET_BYTEORDER(bp) BF64_GET((bp)->blk_prop, 63, 1) |
| #define BP_SET_BYTEORDER(bp, x) BF64_SET((bp)->blk_prop, 63, 1, x) |
| |
| #define BP_PHYSICAL_BIRTH(bp) \ |
| ((bp)->blk_phys_birth ? (bp)->blk_phys_birth : (bp)->blk_birth) |
| |
| #define BP_GET_ASIZE(bp) \ |
| (DVA_GET_ASIZE(&(bp)->blk_dva[0]) + DVA_GET_ASIZE(&(bp)->blk_dva[1]) + \ |
| DVA_GET_ASIZE(&(bp)->blk_dva[2])) |
| |
| #define BP_GET_UCSIZE(bp) \ |
| ((BP_GET_LEVEL(bp) > 0 || dmu_ot[BP_GET_TYPE(bp)].ot_metadata) ? \ |
| BP_GET_PSIZE(bp) : BP_GET_LSIZE(bp)); |
| |
| #define BP_GET_NDVAS(bp) \ |
| (!!DVA_GET_ASIZE(&(bp)->blk_dva[0]) + \ |
| !!DVA_GET_ASIZE(&(bp)->blk_dva[1]) + \ |
| !!DVA_GET_ASIZE(&(bp)->blk_dva[2])) |
| |
| #define DVA_EQUAL(dva1, dva2) \ |
| ((dva1)->dva_word[1] == (dva2)->dva_word[1] && \ |
| (dva1)->dva_word[0] == (dva2)->dva_word[0]) |
| |
| #define ZIO_CHECKSUM_EQUAL(zc1, zc2) \ |
| (0 == (((zc1).zc_word[0] - (zc2).zc_word[0]) | \ |
| ((zc1).zc_word[1] - (zc2).zc_word[1]) | \ |
| ((zc1).zc_word[2] - (zc2).zc_word[2]) | \ |
| ((zc1).zc_word[3] - (zc2).zc_word[3]))) |
| |
| |
| #define DVA_IS_VALID(dva) (DVA_GET_ASIZE(dva) != 0) |
| |
| #define ZIO_SET_CHECKSUM(zcp, w0, w1, w2, w3) \ |
| { \ |
| (zcp)->zc_word[0] = w0; \ |
| (zcp)->zc_word[1] = w1; \ |
| (zcp)->zc_word[2] = w2; \ |
| (zcp)->zc_word[3] = w3; \ |
| } |
| |
| #define BP_IDENTITY(bp) (&(bp)->blk_dva[0]) |
| #define BP_IS_GANG(bp) DVA_GET_GANG(BP_IDENTITY(bp)) |
| #define DVA_IS_EMPTY(dva) ((dva)->dva_word[0] == 0ULL && \ |
| (dva)->dva_word[1] == 0ULL) |
| #define BP_IS_HOLE(bp) DVA_IS_EMPTY(BP_IDENTITY(bp)) |
| #define BP_IS_OLDER(bp, txg) (!BP_IS_HOLE(bp) && (bp)->blk_birth < (txg)) |
| |
| #define BP_ZERO(bp) \ |
| { \ |
| (bp)->blk_dva[0].dva_word[0] = 0; \ |
| (bp)->blk_dva[0].dva_word[1] = 0; \ |
| (bp)->blk_dva[1].dva_word[0] = 0; \ |
| (bp)->blk_dva[1].dva_word[1] = 0; \ |
| (bp)->blk_dva[2].dva_word[0] = 0; \ |
| (bp)->blk_dva[2].dva_word[1] = 0; \ |
| (bp)->blk_prop = 0; \ |
| (bp)->blk_pad[0] = 0; \ |
| (bp)->blk_pad[1] = 0; \ |
| (bp)->blk_phys_birth = 0; \ |
| (bp)->blk_birth = 0; \ |
| (bp)->blk_fill = 0; \ |
| ZIO_SET_CHECKSUM(&(bp)->blk_cksum, 0, 0, 0, 0); \ |
| } |
| |
| #define BPE_NUM_WORDS 14 |
| #define BPE_PAYLOAD_SIZE (BPE_NUM_WORDS * sizeof (uint64_t)) |
| #define BPE_IS_PAYLOADWORD(bp, wp) \ |
| ((wp) != &(bp)->blk_prop && (wp) != &(bp)->blk_birth) |
| |
| /* |
| * Embedded checksum |
| */ |
| #define ZEC_MAGIC 0x210da7ab10c7a11ULL |
| |
| typedef struct zio_eck { |
| uint64_t zec_magic; /* for validation, endianness */ |
| zio_cksum_t zec_cksum; /* 256-bit checksum */ |
| } zio_eck_t; |
| |
| /* |
| * Gang block headers are self-checksumming and contain an array |
| * of block pointers. |
| */ |
| #define SPA_GANGBLOCKSIZE SPA_MINBLOCKSIZE |
| #define SPA_GBH_NBLKPTRS ((SPA_GANGBLOCKSIZE - \ |
| sizeof (zio_eck_t)) / sizeof (blkptr_t)) |
| #define SPA_GBH_FILLER ((SPA_GANGBLOCKSIZE - \ |
| sizeof (zio_eck_t) - \ |
| (SPA_GBH_NBLKPTRS * sizeof (blkptr_t))) /\ |
| sizeof (uint64_t)) |
| |
| typedef struct zio_gbh { |
| blkptr_t zg_blkptr[SPA_GBH_NBLKPTRS]; |
| uint64_t zg_filler[SPA_GBH_FILLER]; |
| zio_eck_t zg_tail; |
| } zio_gbh_phys_t; |
| |
| #define VDEV_RAIDZ_MAXPARITY 3 |
| |
| #define VDEV_PAD_SIZE (8 << 10) |
| /* 2 padding areas (vl_pad1 and vl_pad2) to skip */ |
| #define VDEV_SKIP_SIZE VDEV_PAD_SIZE * 2 |
| #define VDEV_PHYS_SIZE (112 << 10) |
| #define VDEV_UBERBLOCK_RING (128 << 10) |
| |
| #define VDEV_UBERBLOCK_SHIFT(vd) \ |
| MAX((vd)->v_top->v_ashift, UBERBLOCK_SHIFT) |
| #define VDEV_UBERBLOCK_COUNT(vd) \ |
| (VDEV_UBERBLOCK_RING >> VDEV_UBERBLOCK_SHIFT(vd)) |
| #define VDEV_UBERBLOCK_OFFSET(vd, n) \ |
| offsetof(vdev_label_t, vl_uberblock[(n) << VDEV_UBERBLOCK_SHIFT(vd)]) |
| #define VDEV_UBERBLOCK_SIZE(vd) (1ULL << VDEV_UBERBLOCK_SHIFT(vd)) |
| |
| typedef struct vdev_phys { |
| char vp_nvlist[VDEV_PHYS_SIZE - sizeof (zio_eck_t)]; |
| zio_eck_t vp_zbt; |
| } vdev_phys_t; |
| |
| typedef struct vdev_label { |
| char vl_pad1[VDEV_PAD_SIZE]; /* 8K */ |
| char vl_pad2[VDEV_PAD_SIZE]; /* 8K */ |
| vdev_phys_t vl_vdev_phys; /* 112K */ |
| char vl_uberblock[VDEV_UBERBLOCK_RING]; /* 128K */ |
| } vdev_label_t; /* 256K total */ |
| |
| /* |
| * vdev_dirty() flags |
| */ |
| #define VDD_METASLAB 0x01 |
| #define VDD_DTL 0x02 |
| |
| /* |
| * Size and offset of embedded boot loader region on each label. |
| * The total size of the first two labels plus the boot area is 4MB. |
| */ |
| #define VDEV_BOOT_OFFSET (2 * sizeof (vdev_label_t)) |
| #define VDEV_BOOT_SIZE (7ULL << 19) /* 3.5M */ |
| |
| /* |
| * Size of label regions at the start and end of each leaf device. |
| */ |
| #define VDEV_LABEL_START_SIZE (2 * sizeof (vdev_label_t) + VDEV_BOOT_SIZE) |
| #define VDEV_LABEL_END_SIZE (2 * sizeof (vdev_label_t)) |
| #define VDEV_LABELS 4 |
| |
| enum zio_checksum { |
| ZIO_CHECKSUM_INHERIT = 0, |
| ZIO_CHECKSUM_ON, |
| ZIO_CHECKSUM_OFF, |
| ZIO_CHECKSUM_LABEL, |
| ZIO_CHECKSUM_GANG_HEADER, |
| ZIO_CHECKSUM_ZILOG, |
| ZIO_CHECKSUM_FLETCHER_2, |
| ZIO_CHECKSUM_FLETCHER_4, |
| ZIO_CHECKSUM_SHA256, |
| ZIO_CHECKSUM_ZILOG2, |
| ZIO_CHECKSUM_NOPARITY, |
| ZIO_CHECKSUM_SHA512, |
| ZIO_CHECKSUM_SKEIN, |
| ZIO_CHECKSUM_EDONR, |
| ZIO_CHECKSUM_FUNCTIONS |
| }; |
| |
| #define ZIO_CHECKSUM_ON_VALUE ZIO_CHECKSUM_FLETCHER_4 |
| #define ZIO_CHECKSUM_DEFAULT ZIO_CHECKSUM_ON |
| |
| enum zio_compress { |
| ZIO_COMPRESS_INHERIT = 0, |
| ZIO_COMPRESS_ON, |
| ZIO_COMPRESS_OFF, |
| ZIO_COMPRESS_LZJB, |
| ZIO_COMPRESS_EMPTY, |
| ZIO_COMPRESS_GZIP_1, |
| ZIO_COMPRESS_GZIP_2, |
| ZIO_COMPRESS_GZIP_3, |
| ZIO_COMPRESS_GZIP_4, |
| ZIO_COMPRESS_GZIP_5, |
| ZIO_COMPRESS_GZIP_6, |
| ZIO_COMPRESS_GZIP_7, |
| ZIO_COMPRESS_GZIP_8, |
| ZIO_COMPRESS_GZIP_9, |
| ZIO_COMPRESS_ZLE, |
| ZIO_COMPRESS_LZ4, |
| ZIO_COMPRESS_FUNCTIONS |
| }; |
| |
| #define ZIO_COMPRESS_ON_VALUE ZIO_COMPRESS_LZJB |
| #define ZIO_COMPRESS_DEFAULT ZIO_COMPRESS_OFF |
| |
| /* nvlist pack encoding */ |
| #define NV_ENCODE_NATIVE 0 |
| #define NV_ENCODE_XDR 1 |
| |
| typedef enum { |
| DATA_TYPE_UNKNOWN = 0, |
| DATA_TYPE_BOOLEAN, |
| DATA_TYPE_BYTE, |
| DATA_TYPE_INT16, |
| DATA_TYPE_UINT16, |
| DATA_TYPE_INT32, |
| DATA_TYPE_UINT32, |
| DATA_TYPE_INT64, |
| DATA_TYPE_UINT64, |
| DATA_TYPE_STRING, |
| DATA_TYPE_BYTE_ARRAY, |
| DATA_TYPE_INT16_ARRAY, |
| DATA_TYPE_UINT16_ARRAY, |
| DATA_TYPE_INT32_ARRAY, |
| DATA_TYPE_UINT32_ARRAY, |
| DATA_TYPE_INT64_ARRAY, |
| DATA_TYPE_UINT64_ARRAY, |
| DATA_TYPE_STRING_ARRAY, |
| DATA_TYPE_HRTIME, |
| DATA_TYPE_NVLIST, |
| DATA_TYPE_NVLIST_ARRAY, |
| DATA_TYPE_BOOLEAN_VALUE, |
| DATA_TYPE_INT8, |
| DATA_TYPE_UINT8, |
| DATA_TYPE_BOOLEAN_ARRAY, |
| DATA_TYPE_INT8_ARRAY, |
| DATA_TYPE_UINT8_ARRAY |
| } data_type_t; |
| |
| /* |
| * On-disk version number. |
| */ |
| #define SPA_VERSION_1 1ULL |
| #define SPA_VERSION_2 2ULL |
| #define SPA_VERSION_3 3ULL |
| #define SPA_VERSION_4 4ULL |
| #define SPA_VERSION_5 5ULL |
| #define SPA_VERSION_6 6ULL |
| #define SPA_VERSION_7 7ULL |
| #define SPA_VERSION_8 8ULL |
| #define SPA_VERSION_9 9ULL |
| #define SPA_VERSION_10 10ULL |
| #define SPA_VERSION_11 11ULL |
| #define SPA_VERSION_12 12ULL |
| #define SPA_VERSION_13 13ULL |
| #define SPA_VERSION_14 14ULL |
| #define SPA_VERSION_15 15ULL |
| #define SPA_VERSION_16 16ULL |
| #define SPA_VERSION_17 17ULL |
| #define SPA_VERSION_18 18ULL |
| #define SPA_VERSION_19 19ULL |
| #define SPA_VERSION_20 20ULL |
| #define SPA_VERSION_21 21ULL |
| #define SPA_VERSION_22 22ULL |
| #define SPA_VERSION_23 23ULL |
| #define SPA_VERSION_24 24ULL |
| #define SPA_VERSION_25 25ULL |
| #define SPA_VERSION_26 26ULL |
| #define SPA_VERSION_27 27ULL |
| #define SPA_VERSION_28 28ULL |
| #define SPA_VERSION_5000 5000ULL |
| |
| /* |
| * When bumping up SPA_VERSION, make sure GRUB ZFS understands the on-disk |
| * format change. Go to usr/src/grub/grub-0.97/stage2/{zfs-include/, fsys_zfs*}, |
| * and do the appropriate changes. Also bump the version number in |
| * usr/src/grub/capability. |
| */ |
| #define SPA_VERSION SPA_VERSION_5000 |
| #define SPA_VERSION_STRING "5000" |
| |
| /* |
| * Symbolic names for the changes that caused a SPA_VERSION switch. |
| * Used in the code when checking for presence or absence of a feature. |
| * Feel free to define multiple symbolic names for each version if there |
| * were multiple changes to on-disk structures during that version. |
| * |
| * NOTE: When checking the current SPA_VERSION in your code, be sure |
| * to use spa_version() since it reports the version of the |
| * last synced uberblock. Checking the in-flight version can |
| * be dangerous in some cases. |
| */ |
| #define SPA_VERSION_INITIAL SPA_VERSION_1 |
| #define SPA_VERSION_DITTO_BLOCKS SPA_VERSION_2 |
| #define SPA_VERSION_SPARES SPA_VERSION_3 |
| #define SPA_VERSION_RAID6 SPA_VERSION_3 |
| #define SPA_VERSION_BPLIST_ACCOUNT SPA_VERSION_3 |
| #define SPA_VERSION_RAIDZ_DEFLATE SPA_VERSION_3 |
| #define SPA_VERSION_DNODE_BYTES SPA_VERSION_3 |
| #define SPA_VERSION_ZPOOL_HISTORY SPA_VERSION_4 |
| #define SPA_VERSION_GZIP_COMPRESSION SPA_VERSION_5 |
| #define SPA_VERSION_BOOTFS SPA_VERSION_6 |
| #define SPA_VERSION_SLOGS SPA_VERSION_7 |
| #define SPA_VERSION_DELEGATED_PERMS SPA_VERSION_8 |
| #define SPA_VERSION_FUID SPA_VERSION_9 |
| #define SPA_VERSION_REFRESERVATION SPA_VERSION_9 |
| #define SPA_VERSION_REFQUOTA SPA_VERSION_9 |
| #define SPA_VERSION_UNIQUE_ACCURATE SPA_VERSION_9 |
| #define SPA_VERSION_L2CACHE SPA_VERSION_10 |
| #define SPA_VERSION_NEXT_CLONES SPA_VERSION_11 |
| #define SPA_VERSION_ORIGIN SPA_VERSION_11 |
| #define SPA_VERSION_DSL_SCRUB SPA_VERSION_11 |
| #define SPA_VERSION_SNAP_PROPS SPA_VERSION_12 |
| #define SPA_VERSION_USED_BREAKDOWN SPA_VERSION_13 |
| #define SPA_VERSION_PASSTHROUGH_X SPA_VERSION_14 |
| #define SPA_VERSION_USERSPACE SPA_VERSION_15 |
| #define SPA_VERSION_STMF_PROP SPA_VERSION_16 |
| #define SPA_VERSION_RAIDZ3 SPA_VERSION_17 |
| #define SPA_VERSION_USERREFS SPA_VERSION_18 |
| #define SPA_VERSION_HOLES SPA_VERSION_19 |
| #define SPA_VERSION_ZLE_COMPRESSION SPA_VERSION_20 |
| #define SPA_VERSION_DEDUP SPA_VERSION_21 |
| #define SPA_VERSION_RECVD_PROPS SPA_VERSION_22 |
| #define SPA_VERSION_SLIM_ZIL SPA_VERSION_23 |
| #define SPA_VERSION_SA SPA_VERSION_24 |
| #define SPA_VERSION_SCAN SPA_VERSION_25 |
| #define SPA_VERSION_DIR_CLONES SPA_VERSION_26 |
| #define SPA_VERSION_DEADLISTS SPA_VERSION_26 |
| #define SPA_VERSION_FAST_SNAP SPA_VERSION_27 |
| #define SPA_VERSION_MULTI_REPLACE SPA_VERSION_28 |
| #define SPA_VERSION_BEFORE_FEATURES SPA_VERSION_28 |
| #define SPA_VERSION_FEATURES SPA_VERSION_5000 |
| |
| #define SPA_VERSION_IS_SUPPORTED(v) \ |
| (((v) >= SPA_VERSION_INITIAL && (v) <= SPA_VERSION_BEFORE_FEATURES) || \ |
| ((v) >= SPA_VERSION_FEATURES && (v) <= SPA_VERSION)) |
| |
| /* |
| * The following are configuration names used in the nvlist describing a pool's |
| * configuration. |
| */ |
| #define ZPOOL_CONFIG_VERSION "version" |
| #define ZPOOL_CONFIG_POOL_NAME "name" |
| #define ZPOOL_CONFIG_POOL_STATE "state" |
| #define ZPOOL_CONFIG_POOL_TXG "txg" |
| #define ZPOOL_CONFIG_POOL_GUID "pool_guid" |
| #define ZPOOL_CONFIG_CREATE_TXG "create_txg" |
| #define ZPOOL_CONFIG_TOP_GUID "top_guid" |
| #define ZPOOL_CONFIG_VDEV_TREE "vdev_tree" |
| #define ZPOOL_CONFIG_TYPE "type" |
| #define ZPOOL_CONFIG_CHILDREN "children" |
| #define ZPOOL_CONFIG_ID "id" |
| #define ZPOOL_CONFIG_GUID "guid" |
| #define ZPOOL_CONFIG_PATH "path" |
| #define ZPOOL_CONFIG_DEVID "devid" |
| #define ZPOOL_CONFIG_PHYS_PATH "phys_path" |
| #define ZPOOL_CONFIG_METASLAB_ARRAY "metaslab_array" |
| #define ZPOOL_CONFIG_METASLAB_SHIFT "metaslab_shift" |
| #define ZPOOL_CONFIG_ASHIFT "ashift" |
| #define ZPOOL_CONFIG_ASIZE "asize" |
| #define ZPOOL_CONFIG_DTL "DTL" |
| #define ZPOOL_CONFIG_STATS "stats" |
| #define ZPOOL_CONFIG_WHOLE_DISK "whole_disk" |
| #define ZPOOL_CONFIG_ERRCOUNT "error_count" |
| #define ZPOOL_CONFIG_NOT_PRESENT "not_present" |
| #define ZPOOL_CONFIG_SPARES "spares" |
| #define ZPOOL_CONFIG_IS_SPARE "is_spare" |
| #define ZPOOL_CONFIG_NPARITY "nparity" |
| #define ZPOOL_CONFIG_HOSTID "hostid" |
| #define ZPOOL_CONFIG_HOSTNAME "hostname" |
| #define ZPOOL_CONFIG_IS_LOG "is_log" |
| #define ZPOOL_CONFIG_TIMESTAMP "timestamp" /* not stored on disk */ |
| #define ZPOOL_CONFIG_FEATURES_FOR_READ "features_for_read" |
| |
| /* |
| * The persistent vdev state is stored as separate values rather than a single |
| * 'vdev_state' entry. This is because a device can be in multiple states, such |
| * as offline and degraded. |
| */ |
| #define ZPOOL_CONFIG_OFFLINE "offline" |
| #define ZPOOL_CONFIG_FAULTED "faulted" |
| #define ZPOOL_CONFIG_DEGRADED "degraded" |
| #define ZPOOL_CONFIG_REMOVED "removed" |
| #define ZPOOL_CONFIG_FRU "fru" |
| #define ZPOOL_CONFIG_AUX_STATE "aux_state" |
| |
| #define VDEV_TYPE_ROOT "root" |
| #define VDEV_TYPE_MIRROR "mirror" |
| #define VDEV_TYPE_REPLACING "replacing" |
| #define VDEV_TYPE_RAIDZ "raidz" |
| #define VDEV_TYPE_DISK "disk" |
| #define VDEV_TYPE_FILE "file" |
| #define VDEV_TYPE_MISSING "missing" |
| #define VDEV_TYPE_HOLE "hole" |
| #define VDEV_TYPE_SPARE "spare" |
| #define VDEV_TYPE_LOG "log" |
| #define VDEV_TYPE_L2CACHE "l2cache" |
| |
| /* |
| * This is needed in userland to report the minimum necessary device size. |
| */ |
| #define SPA_MINDEVSIZE (64ULL << 20) |
| |
| /* |
| * The location of the pool configuration repository, shared between kernel and |
| * userland. |
| */ |
| #define ZPOOL_CACHE "/boot/zfs/zpool.cache" |
| |
| /* |
| * vdev states are ordered from least to most healthy. |
| * A vdev that's CANT_OPEN or below is considered unusable. |
| */ |
| typedef enum vdev_state { |
| VDEV_STATE_UNKNOWN = 0, /* Uninitialized vdev */ |
| VDEV_STATE_CLOSED, /* Not currently open */ |
| VDEV_STATE_OFFLINE, /* Not allowed to open */ |
| VDEV_STATE_REMOVED, /* Explicitly removed from system */ |
| VDEV_STATE_CANT_OPEN, /* Tried to open, but failed */ |
| VDEV_STATE_FAULTED, /* External request to fault device */ |
| VDEV_STATE_DEGRADED, /* Replicated vdev with unhealthy kids */ |
| VDEV_STATE_HEALTHY /* Presumed good */ |
| } vdev_state_t; |
| |
| /* |
| * vdev aux states. When a vdev is in the CANT_OPEN state, the aux field |
| * of the vdev stats structure uses these constants to distinguish why. |
| */ |
| typedef enum vdev_aux { |
| VDEV_AUX_NONE, /* no error */ |
| VDEV_AUX_OPEN_FAILED, /* ldi_open_*() or vn_open() failed */ |
| VDEV_AUX_CORRUPT_DATA, /* bad label or disk contents */ |
| VDEV_AUX_NO_REPLICAS, /* insufficient number of replicas */ |
| VDEV_AUX_BAD_GUID_SUM, /* vdev guid sum doesn't match */ |
| VDEV_AUX_TOO_SMALL, /* vdev size is too small */ |
| VDEV_AUX_BAD_LABEL, /* the label is OK but invalid */ |
| VDEV_AUX_VERSION_NEWER, /* on-disk version is too new */ |
| VDEV_AUX_VERSION_OLDER, /* on-disk version is too old */ |
| VDEV_AUX_SPARED /* hot spare used in another pool */ |
| } vdev_aux_t; |
| |
| /* |
| * pool state. The following states are written to disk as part of the normal |
| * SPA lifecycle: ACTIVE, EXPORTED, DESTROYED, SPARE. The remaining states are |
| * software abstractions used at various levels to communicate pool state. |
| */ |
| typedef enum pool_state { |
| POOL_STATE_ACTIVE = 0, /* In active use */ |
| POOL_STATE_EXPORTED, /* Explicitly exported */ |
| POOL_STATE_DESTROYED, /* Explicitly destroyed */ |
| POOL_STATE_SPARE, /* Reserved for hot spare use */ |
| POOL_STATE_UNINITIALIZED, /* Internal spa_t state */ |
| POOL_STATE_UNAVAIL, /* Internal libzfs state */ |
| POOL_STATE_POTENTIALLY_ACTIVE /* Internal libzfs state */ |
| } pool_state_t; |
| |
| /* |
| * The uberblock version is incremented whenever an incompatible on-disk |
| * format change is made to the SPA, DMU, or ZAP. |
| * |
| * Note: the first two fields should never be moved. When a storage pool |
| * is opened, the uberblock must be read off the disk before the version |
| * can be checked. If the ub_version field is moved, we may not detect |
| * version mismatch. If the ub_magic field is moved, applications that |
| * expect the magic number in the first word won't work. |
| */ |
| #define UBERBLOCK_MAGIC 0x00bab10c /* oo-ba-bloc! */ |
| #define UBERBLOCK_SHIFT 10 /* up to 1K */ |
| |
| struct uberblock { |
| uint64_t ub_magic; /* UBERBLOCK_MAGIC */ |
| uint64_t ub_version; /* SPA_VERSION */ |
| uint64_t ub_txg; /* txg of last sync */ |
| uint64_t ub_guid_sum; /* sum of all vdev guids */ |
| uint64_t ub_timestamp; /* UTC time of last sync */ |
| blkptr_t ub_rootbp; /* MOS objset_phys_t */ |
| }; |
| |
| /* |
| * Flags. |
| */ |
| #define DNODE_MUST_BE_ALLOCATED 1 |
| #define DNODE_MUST_BE_FREE 2 |
| |
| /* |
| * Fixed constants. |
| */ |
| #define DNODE_SHIFT 9 /* 512 bytes */ |
| #define DN_MIN_INDBLKSHIFT 12 /* 4k */ |
| #define DN_MAX_INDBLKSHIFT 14 /* 16k */ |
| #define DNODE_BLOCK_SHIFT 14 /* 16k */ |
| #define DNODE_CORE_SIZE 64 /* 64 bytes for dnode sans blkptrs */ |
| #define DN_MAX_OBJECT_SHIFT 48 /* 256 trillion (zfs_fid_t limit) */ |
| #define DN_MAX_OFFSET_SHIFT 64 /* 2^64 bytes in a dnode */ |
| |
| /* |
| * Derived constants. |
| */ |
| #define DNODE_SIZE (1 << DNODE_SHIFT) |
| #define DN_MAX_NBLKPTR ((DNODE_SIZE - DNODE_CORE_SIZE) >> SPA_BLKPTRSHIFT) |
| #define DN_MAX_BONUSLEN (DNODE_SIZE - DNODE_CORE_SIZE - (1 << SPA_BLKPTRSHIFT)) |
| #define DN_MAX_OBJECT (1ULL << DN_MAX_OBJECT_SHIFT) |
| |
| #define DNODES_PER_BLOCK_SHIFT (DNODE_BLOCK_SHIFT - DNODE_SHIFT) |
| #define DNODES_PER_BLOCK (1ULL << DNODES_PER_BLOCK_SHIFT) |
| #define DNODES_PER_LEVEL_SHIFT (DN_MAX_INDBLKSHIFT - SPA_BLKPTRSHIFT) |
| |
| /* The +2 here is a cheesy way to round up */ |
| #define DN_MAX_LEVELS (2 + ((DN_MAX_OFFSET_SHIFT - SPA_MINBLOCKSHIFT) / \ |
| (DN_MIN_INDBLKSHIFT - SPA_BLKPTRSHIFT))) |
| |
| #define DN_BONUS(dnp) ((void*)((dnp)->dn_bonus + \ |
| (((dnp)->dn_nblkptr - 1) * sizeof (blkptr_t)))) |
| |
| #define DN_USED_BYTES(dnp) (((dnp)->dn_flags & DNODE_FLAG_USED_BYTES) ? \ |
| (dnp)->dn_used : (dnp)->dn_used << SPA_MINBLOCKSHIFT) |
| |
| #define EPB(blkshift, typeshift) (1 << (blkshift - typeshift)) |
| |
| /* Is dn_used in bytes? if not, it's in multiples of SPA_MINBLOCKSIZE */ |
| #define DNODE_FLAG_USED_BYTES (1<<0) |
| #define DNODE_FLAG_USERUSED_ACCOUNTED (1<<1) |
| |
| /* Does dnode have a SA spill blkptr in bonus? */ |
| #define DNODE_FLAG_SPILL_BLKPTR (1<<2) |
| |
| typedef struct dnode_phys { |
| uint8_t dn_type; /* dmu_object_type_t */ |
| uint8_t dn_indblkshift; /* ln2(indirect block size) */ |
| uint8_t dn_nlevels; /* 1=dn_blkptr->data blocks */ |
| uint8_t dn_nblkptr; /* length of dn_blkptr */ |
| uint8_t dn_bonustype; /* type of data in bonus buffer */ |
| uint8_t dn_checksum; /* ZIO_CHECKSUM type */ |
| uint8_t dn_compress; /* ZIO_COMPRESS type */ |
| uint8_t dn_flags; /* DNODE_FLAG_* */ |
| uint16_t dn_datablkszsec; /* data block size in 512b sectors */ |
| uint16_t dn_bonuslen; /* length of dn_bonus */ |
| uint8_t dn_pad2[4]; |
| |
| /* accounting is protected by dn_dirty_mtx */ |
| uint64_t dn_maxblkid; /* largest allocated block ID */ |
| uint64_t dn_used; /* bytes (or sectors) of disk space */ |
| |
| uint64_t dn_pad3[4]; |
| |
| blkptr_t dn_blkptr[1]; |
| uint8_t dn_bonus[DN_MAX_BONUSLEN - sizeof (blkptr_t)]; |
| blkptr_t dn_spill; |
| } dnode_phys_t; |
| |
| typedef enum dmu_object_byteswap { |
| DMU_BSWAP_UINT8, |
| DMU_BSWAP_UINT16, |
| DMU_BSWAP_UINT32, |
| DMU_BSWAP_UINT64, |
| DMU_BSWAP_ZAP, |
| DMU_BSWAP_DNODE, |
| DMU_BSWAP_OBJSET, |
| DMU_BSWAP_ZNODE, |
| DMU_BSWAP_OLDACL, |
| DMU_BSWAP_ACL, |
| /* |
| * Allocating a new byteswap type number makes the on-disk format |
| * incompatible with any other format that uses the same number. |
| * |
| * Data can usually be structured to work with one of the |
| * DMU_BSWAP_UINT* or DMU_BSWAP_ZAP types. |
| */ |
| DMU_BSWAP_NUMFUNCS |
| } dmu_object_byteswap_t; |
| |
| #define DMU_OT_NEWTYPE 0x80 |
| #define DMU_OT_METADATA 0x40 |
| #define DMU_OT_BYTESWAP_MASK 0x3f |
| |
| /* |
| * Defines a uint8_t object type. Object types specify if the data |
| * in the object is metadata (boolean) and how to byteswap the data |
| * (dmu_object_byteswap_t). |
| */ |
| #define DMU_OT(byteswap, metadata) \ |
| (DMU_OT_NEWTYPE | \ |
| ((metadata) ? DMU_OT_METADATA : 0) | \ |
| ((byteswap) & DMU_OT_BYTESWAP_MASK)) |
| |
| typedef enum dmu_object_type { |
| DMU_OT_NONE, |
| /* general: */ |
| DMU_OT_OBJECT_DIRECTORY, /* ZAP */ |
| DMU_OT_OBJECT_ARRAY, /* UINT64 */ |
| DMU_OT_PACKED_NVLIST, /* UINT8 (XDR by nvlist_pack/unpack) */ |
| DMU_OT_PACKED_NVLIST_SIZE, /* UINT64 */ |
| DMU_OT_BPLIST, /* UINT64 */ |
| DMU_OT_BPLIST_HDR, /* UINT64 */ |
| /* spa: */ |
| DMU_OT_SPACE_MAP_HEADER, /* UINT64 */ |
| DMU_OT_SPACE_MAP, /* UINT64 */ |
| /* zil: */ |
| DMU_OT_INTENT_LOG, /* UINT64 */ |
| /* dmu: */ |
| DMU_OT_DNODE, /* DNODE */ |
| DMU_OT_OBJSET, /* OBJSET */ |
| /* dsl: */ |
| DMU_OT_DSL_DIR, /* UINT64 */ |
| DMU_OT_DSL_DIR_CHILD_MAP, /* ZAP */ |
| DMU_OT_DSL_DS_SNAP_MAP, /* ZAP */ |
| DMU_OT_DSL_PROPS, /* ZAP */ |
| DMU_OT_DSL_DATASET, /* UINT64 */ |
| /* zpl: */ |
| DMU_OT_ZNODE, /* ZNODE */ |
| DMU_OT_OLDACL, /* Old ACL */ |
| DMU_OT_PLAIN_FILE_CONTENTS, /* UINT8 */ |
| DMU_OT_DIRECTORY_CONTENTS, /* ZAP */ |
| DMU_OT_MASTER_NODE, /* ZAP */ |
| DMU_OT_UNLINKED_SET, /* ZAP */ |
| /* zvol: */ |
| DMU_OT_ZVOL, /* UINT8 */ |
| DMU_OT_ZVOL_PROP, /* ZAP */ |
| /* other; for testing only! */ |
| DMU_OT_PLAIN_OTHER, /* UINT8 */ |
| DMU_OT_UINT64_OTHER, /* UINT64 */ |
| DMU_OT_ZAP_OTHER, /* ZAP */ |
| /* new object types: */ |
| DMU_OT_ERROR_LOG, /* ZAP */ |
| DMU_OT_SPA_HISTORY, /* UINT8 */ |
| DMU_OT_SPA_HISTORY_OFFSETS, /* spa_his_phys_t */ |
| DMU_OT_POOL_PROPS, /* ZAP */ |
| DMU_OT_DSL_PERMS, /* ZAP */ |
| DMU_OT_ACL, /* ACL */ |
| DMU_OT_SYSACL, /* SYSACL */ |
| DMU_OT_FUID, /* FUID table (Packed NVLIST UINT8) */ |
| DMU_OT_FUID_SIZE, /* FUID table size UINT64 */ |
| DMU_OT_NEXT_CLONES, /* ZAP */ |
| DMU_OT_SCAN_QUEUE, /* ZAP */ |
| DMU_OT_USERGROUP_USED, /* ZAP */ |
| DMU_OT_USERGROUP_QUOTA, /* ZAP */ |
| DMU_OT_USERREFS, /* ZAP */ |
| DMU_OT_DDT_ZAP, /* ZAP */ |
| DMU_OT_DDT_STATS, /* ZAP */ |
| DMU_OT_SA, /* System attr */ |
| DMU_OT_SA_MASTER_NODE, /* ZAP */ |
| DMU_OT_SA_ATTR_REGISTRATION, /* ZAP */ |
| DMU_OT_SA_ATTR_LAYOUTS, /* ZAP */ |
| DMU_OT_SCAN_XLATE, /* ZAP */ |
| DMU_OT_DEDUP, /* fake dedup BP from ddt_bp_create() */ |
| DMU_OT_NUMTYPES, |
| |
| /* |
| * Names for valid types declared with DMU_OT(). |
| */ |
| DMU_OTN_UINT8_DATA = DMU_OT(DMU_BSWAP_UINT8, B_FALSE), |
| DMU_OTN_UINT8_METADATA = DMU_OT(DMU_BSWAP_UINT8, B_TRUE), |
| DMU_OTN_UINT16_DATA = DMU_OT(DMU_BSWAP_UINT16, B_FALSE), |
| DMU_OTN_UINT16_METADATA = DMU_OT(DMU_BSWAP_UINT16, B_TRUE), |
| DMU_OTN_UINT32_DATA = DMU_OT(DMU_BSWAP_UINT32, B_FALSE), |
| DMU_OTN_UINT32_METADATA = DMU_OT(DMU_BSWAP_UINT32, B_TRUE), |
| DMU_OTN_UINT64_DATA = DMU_OT(DMU_BSWAP_UINT64, B_FALSE), |
| DMU_OTN_UINT64_METADATA = DMU_OT(DMU_BSWAP_UINT64, B_TRUE), |
| DMU_OTN_ZAP_DATA = DMU_OT(DMU_BSWAP_ZAP, B_FALSE), |
| DMU_OTN_ZAP_METADATA = DMU_OT(DMU_BSWAP_ZAP, B_TRUE) |
| } dmu_object_type_t; |
| |
| typedef enum dmu_objset_type { |
| DMU_OST_NONE, |
| DMU_OST_META, |
| DMU_OST_ZFS, |
| DMU_OST_ZVOL, |
| DMU_OST_OTHER, /* For testing only! */ |
| DMU_OST_ANY, /* Be careful! */ |
| DMU_OST_NUMTYPES |
| } dmu_objset_type_t; |
| |
| /* |
| * header for all bonus and spill buffers. |
| * The header has a fixed portion with a variable number |
| * of "lengths" depending on the number of variable sized |
| * attribues which are determined by the "layout number" |
| */ |
| |
| #define SA_MAGIC 0x2F505A /* ZFS SA */ |
| typedef struct sa_hdr_phys { |
| uint32_t sa_magic; |
| uint16_t sa_layout_info; /* Encoded with hdrsize and layout number */ |
| uint16_t sa_lengths[1]; /* optional sizes for variable length attrs */ |
| /* ... Data follows the lengths. */ |
| } sa_hdr_phys_t; |
| |
| /* |
| * sa_hdr_phys -> sa_layout_info |
| * |
| * 16 10 0 |
| * +--------+-------+ |
| * | hdrsz |layout | |
| * +--------+-------+ |
| * |
| * Bits 0-10 are the layout number |
| * Bits 11-16 are the size of the header. |
| * The hdrsize is the number * 8 |
| * |
| * For example. |
| * hdrsz of 1 ==> 8 byte header |
| * 2 ==> 16 byte header |
| * |
| */ |
| |
| #define SA_HDR_LAYOUT_NUM(hdr) BF32_GET(hdr->sa_layout_info, 0, 10) |
| #define SA_HDR_SIZE(hdr) BF32_GET_SB(hdr->sa_layout_info, 10, 16, 3, 0) |
| #define SA_HDR_LAYOUT_INFO_ENCODE(x, num, size) \ |
| { \ |
| BF32_SET_SB(x, 10, 6, 3, 0, size); \ |
| BF32_SET(x, 0, 10, num); \ |
| } |
| |
| #define SA_MODE_OFFSET 0 |
| #define SA_SIZE_OFFSET 8 |
| #define SA_GEN_OFFSET 16 |
| #define SA_UID_OFFSET 24 |
| #define SA_GID_OFFSET 32 |
| #define SA_PARENT_OFFSET 40 |
| |
| /* |
| * Intent log header - this on disk structure holds fields to manage |
| * the log. All fields are 64 bit to easily handle cross architectures. |
| */ |
| typedef struct zil_header { |
| uint64_t zh_claim_txg; /* txg in which log blocks were claimed */ |
| uint64_t zh_replay_seq; /* highest replayed sequence number */ |
| blkptr_t zh_log; /* log chain */ |
| uint64_t zh_claim_seq; /* highest claimed sequence number */ |
| uint64_t zh_pad[5]; |
| } zil_header_t; |
| |
| #define OBJSET_PHYS_SIZE 2048 |
| |
| typedef struct objset_phys { |
| dnode_phys_t os_meta_dnode; |
| zil_header_t os_zil_header; |
| uint64_t os_type; |
| uint64_t os_flags; |
| char os_pad[OBJSET_PHYS_SIZE - sizeof (dnode_phys_t)*3 - |
| sizeof (zil_header_t) - sizeof (uint64_t)*2]; |
| dnode_phys_t os_userused_dnode; |
| dnode_phys_t os_groupused_dnode; |
| } objset_phys_t; |
| |
| typedef struct dsl_dir_phys { |
| uint64_t dd_creation_time; /* not actually used */ |
| uint64_t dd_head_dataset_obj; |
| uint64_t dd_parent_obj; |
| uint64_t dd_clone_parent_obj; |
| uint64_t dd_child_dir_zapobj; |
| /* |
| * how much space our children are accounting for; for leaf |
| * datasets, == physical space used by fs + snaps |
| */ |
| uint64_t dd_used_bytes; |
| uint64_t dd_compressed_bytes; |
| uint64_t dd_uncompressed_bytes; |
| /* Administrative quota setting */ |
| uint64_t dd_quota; |
| /* Administrative reservation setting */ |
| uint64_t dd_reserved; |
| uint64_t dd_props_zapobj; |
| uint64_t dd_pad[21]; /* pad out to 256 bytes for good measure */ |
| } dsl_dir_phys_t; |
| |
| typedef struct dsl_dataset_phys { |
| uint64_t ds_dir_obj; |
| uint64_t ds_prev_snap_obj; |
| uint64_t ds_prev_snap_txg; |
| uint64_t ds_next_snap_obj; |
| uint64_t ds_snapnames_zapobj; /* zap obj of snaps; ==0 for snaps */ |
| uint64_t ds_num_children; /* clone/snap children; ==0 for head */ |
| uint64_t ds_creation_time; /* seconds since 1970 */ |
| uint64_t ds_creation_txg; |
| uint64_t ds_deadlist_obj; |
| uint64_t ds_used_bytes; |
| uint64_t ds_compressed_bytes; |
| uint64_t ds_uncompressed_bytes; |
| uint64_t ds_unique_bytes; /* only relevant to snapshots */ |
| /* |
| * The ds_fsid_guid is a 56-bit ID that can change to avoid |
| * collisions. The ds_guid is a 64-bit ID that will never |
| * change, so there is a small probability that it will collide. |
| */ |
| uint64_t ds_fsid_guid; |
| uint64_t ds_guid; |
| uint64_t ds_flags; |
| blkptr_t ds_bp; |
| uint64_t ds_pad[8]; /* pad out to 320 bytes for good measure */ |
| } dsl_dataset_phys_t; |
| |
| /* |
| * The names of zap entries in the DIRECTORY_OBJECT of the MOS. |
| */ |
| #define DMU_POOL_DIRECTORY_OBJECT 1 |
| #define DMU_POOL_CONFIG "config" |
| #define DMU_POOL_FEATURES_FOR_READ "features_for_read" |
| #define DMU_POOL_ROOT_DATASET "root_dataset" |
| #define DMU_POOL_SYNC_BPLIST "sync_bplist" |
| #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub" |
| #define DMU_POOL_ERRLOG_LAST "errlog_last" |
| #define DMU_POOL_SPARES "spares" |
| #define DMU_POOL_DEFLATE "deflate" |
| #define DMU_POOL_HISTORY "history" |
| #define DMU_POOL_PROPS "pool_props" |
| |
| #define ZAP_MAGIC 0x2F52AB2ABULL |
| |
| #define FZAP_BLOCK_SHIFT(zap) ((zap)->zap_block_shift) |
| |
| #define ZAP_MAXCD (uint32_t)(-1) |
| #define ZAP_HASHBITS 28 |
| #define MZAP_ENT_LEN 64 |
| #define MZAP_NAME_LEN (MZAP_ENT_LEN - 8 - 4 - 2) |
| #define MZAP_MAX_BLKSHIFT SPA_MAXBLOCKSHIFT |
| #define MZAP_MAX_BLKSZ (1 << MZAP_MAX_BLKSHIFT) |
| |
| typedef struct mzap_ent_phys { |
| uint64_t mze_value; |
| uint32_t mze_cd; |
| uint16_t mze_pad; /* in case we want to chain them someday */ |
| char mze_name[MZAP_NAME_LEN]; |
| } mzap_ent_phys_t; |
| |
| typedef struct mzap_phys { |
| uint64_t mz_block_type; /* ZBT_MICRO */ |
| uint64_t mz_salt; |
| uint64_t mz_pad[6]; |
| mzap_ent_phys_t mz_chunk[1]; |
| /* actually variable size depending on block size */ |
| } mzap_phys_t; |
| |
| /* |
| * The (fat) zap is stored in one object. It is an array of |
| * 1<<FZAP_BLOCK_SHIFT byte blocks. The layout looks like one of: |
| * |
| * ptrtbl fits in first block: |
| * [zap_phys_t zap_ptrtbl_shift < 6] [zap_leaf_t] ... |
| * |
| * ptrtbl too big for first block: |
| * [zap_phys_t zap_ptrtbl_shift >= 6] [zap_leaf_t] [ptrtbl] ... |
| * |
| */ |
| |
| #define ZBT_LEAF ((1ULL << 63) + 0) |
| #define ZBT_HEADER ((1ULL << 63) + 1) |
| #define ZBT_MICRO ((1ULL << 63) + 3) |
| /* any other values are ptrtbl blocks */ |
| |
| /* |
| * the embedded pointer table takes up half a block: |
| * block size / entry size (2^3) / 2 |
| */ |
| #define ZAP_EMBEDDED_PTRTBL_SHIFT(zap) (FZAP_BLOCK_SHIFT(zap) - 3 - 1) |
| |
| /* |
| * The embedded pointer table starts half-way through the block. Since |
| * the pointer table itself is half the block, it starts at (64-bit) |
| * word number (1<<ZAP_EMBEDDED_PTRTBL_SHIFT(zap)). |
| */ |
| #define ZAP_EMBEDDED_PTRTBL_ENT(zap, idx) \ |
| ((uint64_t *)(zap)->zap_phys) \ |
| [(idx) + (1<<ZAP_EMBEDDED_PTRTBL_SHIFT(zap))] |
| |
| /* |
| * TAKE NOTE: |
| * If zap_phys_t is modified, zap_byteswap() must be modified. |
| */ |
| typedef struct zap_phys { |
| uint64_t zap_block_type; /* ZBT_HEADER */ |
| uint64_t zap_magic; /* ZAP_MAGIC */ |
| |
| struct zap_table_phys { |
| uint64_t zt_blk; /* starting block number */ |
| uint64_t zt_numblks; /* number of blocks */ |
| uint64_t zt_shift; /* bits to index it */ |
| uint64_t zt_nextblk; /* next (larger) copy start block */ |
| uint64_t zt_blks_copied; /* number source blocks copied */ |
| } zap_ptrtbl; |
| |
| uint64_t zap_freeblk; /* the next free block */ |
| uint64_t zap_num_leafs; /* number of leafs */ |
| uint64_t zap_num_entries; /* number of entries */ |
| uint64_t zap_salt; /* salt to stir into hash function */ |
| /* |
| * This structure is followed by padding, and then the embedded |
| * pointer table. The embedded pointer table takes up second |
| * half of the block. It is accessed using the |
| * ZAP_EMBEDDED_PTRTBL_ENT() macro. |
| */ |
| } zap_phys_t; |
| |
| typedef struct zap_table_phys zap_table_phys_t; |
| |
| typedef struct fat_zap { |
| int zap_block_shift; /* block size shift */ |
| zap_phys_t *zap_phys; |
| } fat_zap_t; |
| |
| #define ZAP_LEAF_MAGIC 0x2AB1EAF |
| |
| /* chunk size = 24 bytes */ |
| #define ZAP_LEAF_CHUNKSIZE 24 |
| |
| /* |
| * The amount of space available for chunks is: |
| * block size (1<<l->l_bs) - hash entry size (2) * number of hash |
| * entries - header space (2*chunksize) |
| */ |
| #define ZAP_LEAF_NUMCHUNKS(l) \ |
| (((1<<(l)->l_bs) - 2*ZAP_LEAF_HASH_NUMENTRIES(l)) / \ |
| ZAP_LEAF_CHUNKSIZE - 2) |
| |
| /* |
| * The amount of space within the chunk available for the array is: |
| * chunk size - space for type (1) - space for next pointer (2) |
| */ |
| #define ZAP_LEAF_ARRAY_BYTES (ZAP_LEAF_CHUNKSIZE - 3) |
| |
| #define ZAP_LEAF_ARRAY_NCHUNKS(bytes) \ |
| (((bytes)+ZAP_LEAF_ARRAY_BYTES-1)/ZAP_LEAF_ARRAY_BYTES) |
| |
| /* |
| * Low water mark: when there are only this many chunks free, start |
| * growing the ptrtbl. Ideally, this should be larger than a |
| * "reasonably-sized" entry. 20 chunks is more than enough for the |
| * largest directory entry (MAXNAMELEN (256) byte name, 8-byte value), |
| * while still being only around 3% for 16k blocks. |
| */ |
| #define ZAP_LEAF_LOW_WATER (20) |
| |
| /* |
| * The leaf hash table has block size / 2^5 (32) number of entries, |
| * which should be more than enough for the maximum number of entries, |
| * which is less than block size / CHUNKSIZE (24) / minimum number of |
| * chunks per entry (3). |
| */ |
| #define ZAP_LEAF_HASH_SHIFT(l) ((l)->l_bs - 5) |
| #define ZAP_LEAF_HASH_NUMENTRIES(l) (1 << ZAP_LEAF_HASH_SHIFT(l)) |
| |
| /* |
| * The chunks start immediately after the hash table. The end of the |
| * hash table is at l_hash + HASH_NUMENTRIES, which we simply cast to a |
| * chunk_t. |
| */ |
| #define ZAP_LEAF_CHUNK(l, idx) \ |
| ((zap_leaf_chunk_t *) \ |
| ((l)->l_phys->l_hash + ZAP_LEAF_HASH_NUMENTRIES(l)))[idx] |
| #define ZAP_LEAF_ENTRY(l, idx) (&ZAP_LEAF_CHUNK(l, idx).l_entry) |
| |
| typedef enum zap_chunk_type { |
| ZAP_CHUNK_FREE = 253, |
| ZAP_CHUNK_ENTRY = 252, |
| ZAP_CHUNK_ARRAY = 251, |
| ZAP_CHUNK_TYPE_MAX = 250 |
| } zap_chunk_type_t; |
| |
| /* |
| * TAKE NOTE: |
| * If zap_leaf_phys_t is modified, zap_leaf_byteswap() must be modified. |
| */ |
| typedef struct zap_leaf_phys { |
| struct zap_leaf_header { |
| uint64_t lh_block_type; /* ZBT_LEAF */ |
| uint64_t lh_pad1; |
| uint64_t lh_prefix; /* hash prefix of this leaf */ |
| uint32_t lh_magic; /* ZAP_LEAF_MAGIC */ |
| uint16_t lh_nfree; /* number free chunks */ |
| uint16_t lh_nentries; /* number of entries */ |
| uint16_t lh_prefix_len; /* num bits used to id this */ |
| |
| /* above is accessable to zap, below is zap_leaf private */ |
| |
| uint16_t lh_freelist; /* chunk head of free list */ |
| uint8_t lh_pad2[12]; |
| } l_hdr; /* 2 24-byte chunks */ |
| |
| /* |
| * The header is followed by a hash table with |
| * ZAP_LEAF_HASH_NUMENTRIES(zap) entries. The hash table is |
| * followed by an array of ZAP_LEAF_NUMCHUNKS(zap) |
| * zap_leaf_chunk structures. These structures are accessed |
| * with the ZAP_LEAF_CHUNK() macro. |
| */ |
| |
| uint16_t l_hash[1]; |
| } zap_leaf_phys_t; |
| |
| typedef union zap_leaf_chunk { |
| struct zap_leaf_entry { |
| uint8_t le_type; /* always ZAP_CHUNK_ENTRY */ |
| uint8_t le_value_intlen; /* size of ints */ |
| uint16_t le_next; /* next entry in hash chain */ |
| uint16_t le_name_chunk; /* first chunk of the name */ |
| uint16_t le_name_numints; /* bytes in name, incl null */ |
| uint16_t le_value_chunk; /* first chunk of the value */ |
| uint16_t le_value_numints; /* value length in ints */ |
| uint32_t le_cd; /* collision differentiator */ |
| uint64_t le_hash; /* hash value of the name */ |
| } l_entry; |
| struct zap_leaf_array { |
| uint8_t la_type; /* always ZAP_CHUNK_ARRAY */ |
| uint8_t la_array[ZAP_LEAF_ARRAY_BYTES]; |
| uint16_t la_next; /* next blk or CHAIN_END */ |
| } l_array; |
| struct zap_leaf_free { |
| uint8_t lf_type; /* always ZAP_CHUNK_FREE */ |
| uint8_t lf_pad[ZAP_LEAF_ARRAY_BYTES]; |
| uint16_t lf_next; /* next in free list, or CHAIN_END */ |
| } l_free; |
| } zap_leaf_chunk_t; |
| |
| typedef struct zap_leaf { |
| int l_bs; /* block size shift */ |
| zap_leaf_phys_t *l_phys; |
| } zap_leaf_t; |
| |
| /* |
| * Define special zfs pflags |
| */ |
| #define ZFS_XATTR 0x1 /* is an extended attribute */ |
| #define ZFS_INHERIT_ACE 0x2 /* ace has inheritable ACEs */ |
| #define ZFS_ACL_TRIVIAL 0x4 /* files ACL is trivial */ |
| |
| #define MASTER_NODE_OBJ 1 |
| |
| /* |
| * special attributes for master node. |
| */ |
| |
| #define ZFS_FSID "FSID" |
| #define ZFS_UNLINKED_SET "DELETE_QUEUE" |
| #define ZFS_ROOT_OBJ "ROOT" |
| #define ZPL_VERSION_OBJ "VERSION" |
| #define ZFS_PROP_BLOCKPERPAGE "BLOCKPERPAGE" |
| #define ZFS_PROP_NOGROWBLOCKS "NOGROWBLOCKS" |
| |
| #define ZFS_FLAG_BLOCKPERPAGE 0x1 |
| #define ZFS_FLAG_NOGROWBLOCKS 0x2 |
| |
| /* |
| * ZPL version - rev'd whenever an incompatible on-disk format change |
| * occurs. Independent of SPA/DMU/ZAP versioning. |
| */ |
| |
| #define ZPL_VERSION 1ULL |
| |
| /* |
| * The directory entry has the type (currently unused on Solaris) in the |
| * top 4 bits, and the object number in the low 48 bits. The "middle" |
| * 12 bits are unused. |
| */ |
| #define ZFS_DIRENT_TYPE(de) BF64_GET(de, 60, 4) |
| #define ZFS_DIRENT_OBJ(de) BF64_GET(de, 0, 48) |
| #define ZFS_DIRENT_MAKE(type, obj) (((uint64_t)type << 60) | obj) |
| |
| typedef struct ace { |
| uid_t a_who; /* uid or gid */ |
| uint32_t a_access_mask; /* read,write,... */ |
| uint16_t a_flags; /* see below */ |
| uint16_t a_type; /* allow or deny */ |
| } ace_t; |
| |
| #define ACE_SLOT_CNT 6 |
| |
| typedef struct zfs_znode_acl { |
| uint64_t z_acl_extern_obj; /* ext acl pieces */ |
| uint32_t z_acl_count; /* Number of ACEs */ |
| uint16_t z_acl_version; /* acl version */ |
| uint16_t z_acl_pad; /* pad */ |
| ace_t z_ace_data[ACE_SLOT_CNT]; /* 6 standard ACEs */ |
| } zfs_znode_acl_t; |
| |
| /* |
| * This is the persistent portion of the znode. It is stored |
| * in the "bonus buffer" of the file. Short symbolic links |
| * are also stored in the bonus buffer. |
| */ |
| typedef struct znode_phys { |
| uint64_t zp_atime[2]; /* 0 - last file access time */ |
| uint64_t zp_mtime[2]; /* 16 - last file modification time */ |
| uint64_t zp_ctime[2]; /* 32 - last file change time */ |
| uint64_t zp_crtime[2]; /* 48 - creation time */ |
| uint64_t zp_gen; /* 64 - generation (txg of creation) */ |
| uint64_t zp_mode; /* 72 - file mode bits */ |
| uint64_t zp_size; /* 80 - size of file */ |
| uint64_t zp_parent; /* 88 - directory parent (`..') */ |
| uint64_t zp_links; /* 96 - number of links to file */ |
| uint64_t zp_xattr; /* 104 - DMU object for xattrs */ |
| uint64_t zp_rdev; /* 112 - dev_t for VBLK & VCHR files */ |
| uint64_t zp_flags; /* 120 - persistent flags */ |
| uint64_t zp_uid; /* 128 - file owner */ |
| uint64_t zp_gid; /* 136 - owning group */ |
| uint64_t zp_pad[4]; /* 144 - future */ |
| zfs_znode_acl_t zp_acl; /* 176 - 263 ACL */ |
| /* |
| * Data may pad out any remaining bytes in the znode buffer, eg: |
| * |
| * |<---------------------- dnode_phys (512) ------------------------>| |
| * |<-- dnode (192) --->|<----------- "bonus" buffer (320) ---------->| |
| * |<---- znode (264) ---->|<---- data (56) ---->| |
| * |
| * At present, we only use this space to store symbolic links. |
| */ |
| } znode_phys_t; |
| |
| /* |
| * In-core vdev representation. |
| */ |
| struct vdev; |
| typedef int vdev_phys_read_t(struct vdev *vdev, void *priv, |
| off_t offset, void *buf, size_t bytes); |
| typedef int vdev_read_t(struct vdev *vdev, const blkptr_t *bp, |
| void *buf, off_t offset, size_t bytes); |
| |
| typedef STAILQ_HEAD(vdev_list, vdev) vdev_list_t; |
| |
| typedef struct vdev { |
| STAILQ_ENTRY(vdev) v_childlink; /* link in parent's child list */ |
| STAILQ_ENTRY(vdev) v_alllink; /* link in global vdev list */ |
| vdev_list_t v_children; /* children of this vdev */ |
| const char *v_name; /* vdev name */ |
| const char *v_phys_path; /* vdev bootpath */ |
| const char *v_devid; /* vdev devid */ |
| uint64_t v_guid; /* vdev guid */ |
| int v_id; /* index in parent */ |
| int v_ashift; /* offset to block shift */ |
| int v_nparity; /* # parity for raidz */ |
| struct vdev *v_top; /* parent vdev */ |
| int v_nchildren; /* # children */ |
| vdev_state_t v_state; /* current state */ |
| vdev_phys_read_t *v_phys_read; /* read from raw leaf vdev */ |
| vdev_read_t *v_read; /* read from vdev */ |
| void *v_read_priv; /* private data for read function */ |
| } vdev_t; |
| |
| /* |
| * In-core pool representation. |
| */ |
| typedef STAILQ_HEAD(spa_list, spa) spa_list_t; |
| |
| typedef struct spa { |
| STAILQ_ENTRY(spa) spa_link; /* link in global pool list */ |
| char *spa_name; /* pool name */ |
| uint64_t spa_guid; /* pool guid */ |
| uint64_t spa_txg; /* most recent transaction */ |
| struct uberblock spa_uberblock; /* best uberblock so far */ |
| vdev_list_t spa_vdevs; /* list of all toplevel vdevs */ |
| objset_phys_t spa_mos; /* MOS for this pool */ |
| int spa_inited; /* initialized */ |
| } spa_t; |
| |
| static void decode_embedded_bp_compressed(const blkptr_t *, void *); |