| /* |
| * Copyright (c) 2010 The FreeBSD Foundation |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * Technologic Systems TS-7800 Device Tree Source. |
| * |
| * $FreeBSD$ |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "mrvl,TS-7800"; |
| compatible = "DB-88F5182-BP", "DB-88F5182-BP-A"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &mge0; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| mpp = &MPP; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "ARM,88FR531"; |
| reg = <0x0>; |
| d-cache-line-size = <32>; // 32 bytes |
| i-cache-line-size = <32>; // 32 bytes |
| d-cache-size = <0x8000>; // L1, 32K |
| i-cache-size = <0x8000>; // L1, 32K |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x08000000>; // 128M at 0x0 |
| }; |
| |
| localbus@f1000000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "mrvl,lbc"; |
| |
| /* This reflects CPU decode windows setup. */ |
| ranges = <0x0 0x0f 0xf9300000 0x00100000 |
| 0x1 0x1e 0xfa000000 0x00100000 |
| 0x2 0x1d 0xfa100000 0x02000000>; |
| }; |
| |
| soc88f5182@f1000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0x0 0xf1000000 0x00100000>; |
| bus-frequency = <0>; |
| |
| PIC: pic@20200 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| reg = <0x20200 0x3c>; |
| compatible = "mrvl,pic"; |
| }; |
| |
| timer@20300 { |
| compatible = "mrvl,timer"; |
| reg = <0x20300 0x30>; |
| interrupts = <0>; |
| interrupt-parent = <&PIC>; |
| mrvl,has-wdt; |
| }; |
| |
| MPP: mpp@10000 { |
| #pin-cells = <2>; |
| compatible = "mrvl,mpp"; |
| reg = <0x10000 0x54>; |
| pin-count = <20>; |
| pin-map = < |
| 16 0 /* MPP[16]: UA1_RXD */ |
| 17 0 /* MPP[17]: UA1_TXD */ |
| 19 0 >; /* MPP[19]: UA1_RTS */ |
| }; |
| |
| mge0: ethernet@72000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| model = "V1"; |
| compatible = "mrvl,ge"; |
| reg = <0x72000 0x2000>; |
| ranges = <0x0 0x72000 0x2000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <18 19 20 21 22>; |
| interrupt-parent = <&PIC>; |
| |
| phy-handle = <&phy0>; |
| |
| mdio@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "mrvl,mdio"; |
| |
| phy0: ethernet-phy@0 { |
| reg = <0x0>; |
| }; |
| }; |
| }; |
| |
| serial0: serial@12000 { |
| compatible = "ns16550"; |
| reg = <0x12000 0x20>; |
| reg-shift = <2>; |
| clock-frequency = <0>; |
| interrupts = <3>; |
| interrupt-parent = <&PIC>; |
| }; |
| |
| serial1: serial@12100 { |
| compatible = "ns16550"; |
| reg = <0x12100 0x20>; |
| reg-shift = <2>; |
| clock-frequency = <0>; |
| interrupts = <4>; |
| interrupt-parent = <&PIC>; |
| }; |
| }; |
| |
| chosen { |
| stdin = "serial0"; |
| stdout = "serial0"; |
| }; |
| }; |