usr/src/boot/sys/boot/fdt/dts/arm/exynos5.dtsi - illumos-gate - Gitiles

 /*-
  * Copyright (c) 2013-2014 Ruslan Bukin <br@bsdpad.com>
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
  *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
  * $FreeBSD$
  */

 / {
 	compatible = "samsung,exynos5";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&GIC>;

 	aliases {
 		soc = &SOC;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		serial2 = &serial2;
 		serial3 = &serial3;
 		clk0 = &clk0;
 		dp0 = &dp0;
 		fimd0 = &fimd0;
 	};

 	SOC: Exynos5@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		ranges;
 		bus-frequency = <0>;

 		pmu_system_controller: system-controller@10040000 {
 			reg = <0x10040000 0x5000>;
 			status = "disabled";
 		};

 		GIC: interrupt-controller@10481000 {
 			compatible = "arm,gic";
 			reg =	< 0x10481000 0x1000 >,	/* Distributor Registers */
 				< 0x10482000 0x2000 >;	/* CPU Interface Registers */
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
 		};

 		combiner: interrupt-controller@10440000 {
 			compatible = "exynos,combiner";
 			reg = <0x10440000 0x1000>;
 			interrupts = < 32 33 34 35 36 37 38 39
 				       40 41 42 43 44 45 46 47
 				       48 49 50 51 52 53 54 55
 				       56 57 58 59 60 61 62 63 >;
 			interrupt-parent = <&GIC>;
 		};

 		clk0: clk@10010000 {
 			compatible = "exynos,clk";
 			reg = < 0x10020000 0x20000 >;
 		};

 		mct {
 			compatible = "exynos,mct";
 			reg = < 0x101C0000 0x1000 >;
 			clock-frequency = <24000000>;
 		};

 		generic_timer {
 			compatible = "arm,armv7-timer";
 			clock-frequency = <24000000>;
 			interrupts = < 29 30 27 26 >;
 			interrupt-parent = <&GIC>;
 		};

 		pwm {
 			compatible = "samsung,s3c24x0-timer";
 			reg = <0x12DD0000 0x1000>;
 			interrupts = < 71 >;
 			interrupt-parent = <&GIC>;
 			clock-frequency = <24000000>;
 		};

 		pad0: pad@11400000 {
 			status = "disabled";
 		};

 		usbdrd_phy0: phy@12100000 {
 			compatible = "samsung,exynos5420-usbdrd-phy";
 			status = "disabled";
 			reg = <0x12100000 0x100>;
 			samsung,pmu-syscon = <&pmu_system_controller>;
 		};

 		usbdrd_phy1: phy@12500000 {
 			compatible = "samsung,exynos5420-usbdrd-phy";
 			status = "disabled";
 			reg = <0x12500000 0x100>;
 			samsung,pmu-syscon = <&pmu_system_controller>;
 		};

 		xhci@12000000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			status = "disabled";
 			reg = <0x12000000 0x1000>,
 			      <0x1200c100 0x1000>;
 			interrupts = < 104 >;
 			interrupt-parent = <&GIC>;
 		};

 		xhci@12400000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			status = "disabled";
 			reg = <0x12400000 0x1000>,
 			      <0x1240c100 0x1000>;
 			interrupts = < 105 >;
 			interrupt-parent = <&GIC>;
 		};

 		usb@12110000 {
 			compatible = "exynos,usb-ehci", "usb-ehci";
 			status = "disabled";
 			reg = <0x12110000 0x1000>, /* EHCI */
 			      <0x12130000 0x1000>, /* EHCI host ctrl */
 			      <0x10050230 0x10>; /* Sysreg */
 			interrupts = < 103 >;
 			interrupt-parent = <&GIC>;
 		};

 		usb@12120000 {
 			compatible = "exynos,usb-ohci", "usb-ohci";
 			status = "disabled";
 			reg = <0x12120000 0x10000>;
 			interrupts = < 103 >;
 			interrupt-parent = <&GIC>;
 		};

 		sdhci@12200000 {
 			compatible = "sdhci_generic";
 			status = "disabled";
 			reg = <0x12200000 0x1000>;
 			interrupts = <107>;
 			interrupt-parent = <&GIC>;
 			max-frequency = <24000000>; /* TODO: verify freq */
 		};

 		sdhci@12210000 {
 			compatible = "sdhci_generic";
 			status = "disabled";
 			reg = <0x12210000 0x1000>;
 			interrupts = <108>;
 			interrupt-parent = <&GIC>;
 			max-frequency = <24000000>;
 		};

 		sdhci@12220000 {
 			compatible = "sdhci_generic";
 			status = "disabled";
 			reg = <0x12220000 0x1000>;
 			interrupts = <109>;
 			interrupt-parent = <&GIC>;
 			max-frequency = <24000000>;
 		};

 		sdhci@12230000 {
 			compatible = "sdhci_generic";
 			status = "disabled";
 			reg = <0x12230000 0x1000>;
 			interrupts = <110>;
 			interrupt-parent = <&GIC>;
 			max-frequency = <24000000>;
 		};

 		serial0: serial@12C00000 {
 			compatible = "exynos";
 			status = "disabled";
 			reg = <0x12C00000 0x100>;
 			interrupts = < 83 >;
 			interrupt-parent = <&GIC>;
 			clock-frequency = < 100000000 >;
 			current-speed = <115200>;
 		};

 		serial1: serial@12C10000 {
 			compatible = "exynos";
 			status = "disabled";
 			reg = <0x12C10000 0x100>;
 			interrupts = < 84 >;
 			interrupt-parent = <&GIC>;
 			clock-frequency = < 100000000 >;
 			current-speed = <115200>;
 		};

 		serial2: serial@12C20000 {
 			compatible = "exynos";
 			status = "disabled";
 			reg = <0x12C20000 0x100>;
 			interrupts = < 85 >;
 			interrupt-parent = <&GIC>;
 			clock-frequency = < 100000000 >;
 			current-speed = <115200>;
 		};

 		serial3: serial@12C30000 {
 			compatible = "exynos";
 			status = "disabled";
 			reg = <0x12C30000 0x100>;
 			interrupts = < 86 >;
 			interrupt-parent = <&GIC>;
 			clock-frequency = < 100000000 >;
 			current-speed = <115200>;
 		};

 		spi0: spi@12d20000 {
 			compatible = "samsung,exynos5-spi";
 			status = "disabled";
 			reg = <0x12d20000 0x100>;
 			interrupts = < 100 >;
 			interrupt-parent = <&GIC>;
 		};

 		spi1: spi@12d30000 {
 			compatible = "samsung,exynos5-spi";
 			status = "disabled";
 			reg = <0x12d30000 0x100>;
 			interrupts = < 101 >;
 			interrupt-parent = <&GIC>;
 		};

 		spi2: spi@12d40000 {
 			compatible = "samsung,exynos5-spi";
 			status = "disabled";
 			reg = <0x12d40000 0x100>;
 			interrupts = < 102 >;
 			interrupt-parent = <&GIC>;
 		};

 		i2c0: i2c@12C60000 {
 			compatible = "exynos,i2c";
 			status = "disabled";
 			reg = <0x12C60000 0x10000>;
 			interrupts = < 88 >;
 			interrupt-parent = <&GIC>;
 		};

 		i2c1: i2c@12C70000 {
 			compatible = "exynos,i2c";
 			status = "disabled";
 			reg = <0x12C70000 0x10000>;
 			interrupts = < 89 >;
 			interrupt-parent = <&GIC>;
 		};

 		i2c2: i2c@12C80000 {
 			compatible = "exynos,i2c";
 			status = "disabled";
 			reg = <0x12C80000 0x10000>;
 			interrupts = < 90 >;
 			interrupt-parent = <&GIC>;
 		};

 		i2c3: i2c@12C90000 {
 			compatible = "exynos,i2c";
 			status = "disabled";
 			reg = <0x12C90000 0x10000>;
 			interrupts = < 91 >;
 			interrupt-parent = <&GIC>;
 		};

 		i2c4: i2c@12CA0000 {
 			compatible = "exynos,i2c";
 			status = "disabled";
 			reg = <0x12CA0000 0x10000>;
 			interrupts = < 92 >;
 			interrupt-parent = <&GIC>;
 		};

 		i2c5: i2c@12CB0000 {
 			compatible = "exynos,i2c";
 			status = "disabled";
 			reg = <0x12CB0000 0x10000>;
 			interrupts = < 93 >;
 			interrupt-parent = <&GIC>;
 		};

 		i2c6: i2c@12CC0000 {
 			compatible = "exynos,i2c";
 			status = "disabled";
 			reg = <0x12CC0000 0x10000>;
 			interrupts = < 94 >;
 			interrupt-parent = <&GIC>;
 		};

 		i2c7: i2c@12CD0000 {
 			compatible = "exynos,i2c";
 			status = "disabled";
 			reg = <0x12CD0000 0x10000>;
 			interrupts = < 95 >;
 			interrupt-parent = <&GIC>;
 		};

 		fimd0: fimd@14400000 {
 			compatible = "exynos,fimd";
 			status = "disabled";
 			reg = < 0x14400000 0x10000 >, /* fimd */
 			      < 0x14420000 0x10000 >, /* disp */
 			      < 0x10050000 0x220 >; /* sysreg */
 			interrupt-parent = <&GIC>;
 		};

 		dp0: dp@145B0000 {
 			compatible = "exynos,dp";
 			status = "disabled";
 			reg = < 0x145B0000 0x10000 >;
 			interrupt-parent = <&GIC>;
 		};
 	};
 };
	/*-
	* Copyright (c) 2013-2014 Ruslan Bukin <br@bsdpad.com>
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	*
	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
	* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
	* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
	* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
	* SUCH DAMAGE.
	*
	* $FreeBSD$
	*/

	/ {
	compatible = "samsung,exynos5";
	#address-cells = <1>;
	#size-cells = <1>;
	interrupt-parent = <&GIC>;

	aliases {
	soc = &SOC;
	serial0 = &serial0;
	serial1 = &serial1;
	serial2 = &serial2;
	serial3 = &serial3;
	clk0 = &clk0;
	dp0 = &dp0;
	fimd0 = &fimd0;
	};

	SOC: Exynos5@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "simple-bus";
	ranges;
	bus-frequency = <0>;

	pmu_system_controller: system-controller@10040000 {
	reg = <0x10040000 0x5000>;
	status = "disabled";
	};

	GIC: interrupt-controller@10481000 {
	compatible = "arm,gic";
	reg = < 0x10481000 0x1000 >, /* Distributor Registers */
	< 0x10482000 0x2000 >; /* CPU Interface Registers */
	interrupt-controller;
	#address-cells = <0>;
	#interrupt-cells = <1>;
	};

	combiner: interrupt-controller@10440000 {
	compatible = "exynos,combiner";
	reg = <0x10440000 0x1000>;
	interrupts = < 32 33 34 35 36 37 38 39
	40 41 42 43 44 45 46 47
	48 49 50 51 52 53 54 55
	56 57 58 59 60 61 62 63 >;
	interrupt-parent = <&GIC>;
	};

	clk0: clk@10010000 {
	compatible = "exynos,clk";
	reg = < 0x10020000 0x20000 >;
	};

	mct {
	compatible = "exynos,mct";
	reg = < 0x101C0000 0x1000 >;
	clock-frequency = <24000000>;
	};

	generic_timer {
	compatible = "arm,armv7-timer";
	clock-frequency = <24000000>;
	interrupts = < 29 30 27 26 >;
	interrupt-parent = <&GIC>;
	};

	pwm {
	compatible = "samsung,s3c24x0-timer";
	reg = <0x12DD0000 0x1000>;
	interrupts = < 71 >;
	interrupt-parent = <&GIC>;
	clock-frequency = <24000000>;
	};

	pad0: pad@11400000 {
	status = "disabled";
	};

	usbdrd_phy0: phy@12100000 {
	compatible = "samsung,exynos5420-usbdrd-phy";
	status = "disabled";
	reg = <0x12100000 0x100>;
	samsung,pmu-syscon = <&pmu_system_controller>;
	};

	usbdrd_phy1: phy@12500000 {
	compatible = "samsung,exynos5420-usbdrd-phy";
	status = "disabled";
	reg = <0x12500000 0x100>;
	samsung,pmu-syscon = <&pmu_system_controller>;
	};

	xhci@12000000 {
	compatible = "samsung,exynos5250-dwusb3";
	status = "disabled";
	reg = <0x12000000 0x1000>,
	<0x1200c100 0x1000>;
	interrupts = < 104 >;
	interrupt-parent = <&GIC>;
	};

	xhci@12400000 {
	compatible = "samsung,exynos5250-dwusb3";
	status = "disabled";
	reg = <0x12400000 0x1000>,
	<0x1240c100 0x1000>;
	interrupts = < 105 >;
	interrupt-parent = <&GIC>;
	};

	usb@12110000 {
	compatible = "exynos,usb-ehci", "usb-ehci";
	status = "disabled";
	reg = <0x12110000 0x1000>, /* EHCI */
	<0x12130000 0x1000>, /* EHCI host ctrl */
	<0x10050230 0x10>; /* Sysreg */
	interrupts = < 103 >;
	interrupt-parent = <&GIC>;
	};

	usb@12120000 {
	compatible = "exynos,usb-ohci", "usb-ohci";
	status = "disabled";
	reg = <0x12120000 0x10000>;
	interrupts = < 103 >;
	interrupt-parent = <&GIC>;
	};

	sdhci@12200000 {
	compatible = "sdhci_generic";
	status = "disabled";
	reg = <0x12200000 0x1000>;
	interrupts = <107>;
	interrupt-parent = <&GIC>;
	max-frequency = <24000000>; /* TODO: verify freq */
	};

	sdhci@12210000 {
	compatible = "sdhci_generic";
	status = "disabled";
	reg = <0x12210000 0x1000>;
	interrupts = <108>;
	interrupt-parent = <&GIC>;
	max-frequency = <24000000>;
	};

	sdhci@12220000 {
	compatible = "sdhci_generic";
	status = "disabled";
	reg = <0x12220000 0x1000>;
	interrupts = <109>;
	interrupt-parent = <&GIC>;
	max-frequency = <24000000>;
	};

	sdhci@12230000 {
	compatible = "sdhci_generic";
	status = "disabled";
	reg = <0x12230000 0x1000>;
	interrupts = <110>;
	interrupt-parent = <&GIC>;
	max-frequency = <24000000>;
	};

	serial0: serial@12C00000 {
	compatible = "exynos";
	status = "disabled";
	reg = <0x12C00000 0x100>;
	interrupts = < 83 >;
	interrupt-parent = <&GIC>;
	clock-frequency = < 100000000 >;
	current-speed = <115200>;
	};

	serial1: serial@12C10000 {
	compatible = "exynos";
	status = "disabled";
	reg = <0x12C10000 0x100>;
	interrupts = < 84 >;
	interrupt-parent = <&GIC>;
	clock-frequency = < 100000000 >;
	current-speed = <115200>;
	};

	serial2: serial@12C20000 {
	compatible = "exynos";
	status = "disabled";
	reg = <0x12C20000 0x100>;
	interrupts = < 85 >;
	interrupt-parent = <&GIC>;
	clock-frequency = < 100000000 >;
	current-speed = <115200>;
	};

	serial3: serial@12C30000 {
	compatible = "exynos";
	status = "disabled";
	reg = <0x12C30000 0x100>;
	interrupts = < 86 >;
	interrupt-parent = <&GIC>;
	clock-frequency = < 100000000 >;
	current-speed = <115200>;
	};

	spi0: spi@12d20000 {
	compatible = "samsung,exynos5-spi";
	status = "disabled";
	reg = <0x12d20000 0x100>;
	interrupts = < 100 >;
	interrupt-parent = <&GIC>;
	};

	spi1: spi@12d30000 {
	compatible = "samsung,exynos5-spi";
	status = "disabled";
	reg = <0x12d30000 0x100>;
	interrupts = < 101 >;
	interrupt-parent = <&GIC>;
	};

	spi2: spi@12d40000 {
	compatible = "samsung,exynos5-spi";
	status = "disabled";
	reg = <0x12d40000 0x100>;
	interrupts = < 102 >;
	interrupt-parent = <&GIC>;
	};

	i2c0: i2c@12C60000 {
	compatible = "exynos,i2c";
	status = "disabled";
	reg = <0x12C60000 0x10000>;
	interrupts = < 88 >;
	interrupt-parent = <&GIC>;
	};

	i2c1: i2c@12C70000 {
	compatible = "exynos,i2c";
	status = "disabled";
	reg = <0x12C70000 0x10000>;
	interrupts = < 89 >;
	interrupt-parent = <&GIC>;
	};

	i2c2: i2c@12C80000 {
	compatible = "exynos,i2c";
	status = "disabled";
	reg = <0x12C80000 0x10000>;
	interrupts = < 90 >;
	interrupt-parent = <&GIC>;
	};

	i2c3: i2c@12C90000 {
	compatible = "exynos,i2c";
	status = "disabled";
	reg = <0x12C90000 0x10000>;
	interrupts = < 91 >;
	interrupt-parent = <&GIC>;
	};

	i2c4: i2c@12CA0000 {
	compatible = "exynos,i2c";
	status = "disabled";
	reg = <0x12CA0000 0x10000>;
	interrupts = < 92 >;
	interrupt-parent = <&GIC>;
	};

	i2c5: i2c@12CB0000 {
	compatible = "exynos,i2c";
	status = "disabled";
	reg = <0x12CB0000 0x10000>;
	interrupts = < 93 >;
	interrupt-parent = <&GIC>;
	};

	i2c6: i2c@12CC0000 {
	compatible = "exynos,i2c";
	status = "disabled";
	reg = <0x12CC0000 0x10000>;
	interrupts = < 94 >;
	interrupt-parent = <&GIC>;
	};

	i2c7: i2c@12CD0000 {
	compatible = "exynos,i2c";
	status = "disabled";
	reg = <0x12CD0000 0x10000>;
	interrupts = < 95 >;
	interrupt-parent = <&GIC>;
	};

	fimd0: fimd@14400000 {
	compatible = "exynos,fimd";
	status = "disabled";
	reg = < 0x14400000 0x10000 >, /* fimd */
	< 0x14420000 0x10000 >, /* disp */
	< 0x10050000 0x220 >; /* sysreg */
	interrupt-parent = <&GIC>;
	};

	dp0: dp@145B0000 {
	compatible = "exynos,dp";
	status = "disabled";
	reg = < 0x145B0000 0x10000 >;
	interrupt-parent = <&GIC>;
	};
	};
	};